The perfect tool for beginners.A must for the professional.

This is our most powerful hydroponic module. It is designed to maximise the amount of oxygen available to plant roots. Used by the biggest research laboratories in the US, like Argonne National Laboratory and Los Alamos National Laboratory it has demonstrated the most dramatic propagation rates of any hydroponic system yet tested.

The RainForest is an essential propagating tool for the professional, the collector and alldedicated growers.

• L = 67 cm – W = 67 cm – H = 31 cm 
• Effective capacity = 60 Litres 
• 72 plant-sites.
• The Vortex 12V motor uses very little electricity and can be hooked to solar power. Inquire with your usual supplier.

Aeroponics Cloning/Growing SystemThe latest generation of aeroponic growing systems.

For propagating cuttings, rooting transplants, no other hydroponic system will match the performance of the RainForest². This system is ideal for starting plants or even growing plants to maturity and on to harvest. Many growers choose to start their plants in RainForest modules and later transplant them into larger systems or in soil.

The RainForest²® is the latest concept imagined and created by GH in California. This new generation of growing modules offers all the advantages of a complete growing system and combines, in one unit, all the properties of the small systems existing today.

The RainForest²® is the most flexible of growing systems. It exists in three versions, the RF236, the RF318 and the RF66. The only difference between these units is the quantity of plants which can be grown in them : 36 in the small, 18 in the medium; and 6 in the large pots.

Like the EcoGrower, the RainForest²® is sold ready-to-use, with a kit of Flora Series, a pH Test Indicator, 10 g of Dry pH Down, and detailed instructions.

• The RainForest²® allows you to root your cuttings, and grow your plants all the way to harvest, thus avoiding transplanting and the stress linked to this process.
• Thanks to the exclusive oxygenating and spraying capacity of its Vortex Sprayer, which lifts the nutrient solution and gently distributes it over the cutting's bases or root system, it creates such a healthy environment in the root zone that there is no need for the old domes found on traditional propagating systems.

For beginners and small projectsSimple, efficient and elegant

The Panda Systems are our latest growing units. A little smaller than the Dutch Pot Systems, they allow you to grow from 8 to 40 plats, depending on the size of the plants you are growing.

In «Hydro» or in «Aero» versions, the Panda Systems are easy to assemble and user-friendly.

•  
• They offer unique advantages:
• - They are self-contained, to prevent leaking.
• - Their rectangular shape (124 x 62 x 53 cm) makes them easy to use in any small area.
• - Its large reservoir (150 L), for a relatively small amount of plants, guarantees a good water supply and helps regulate the pH level.

The missing link: the Dutch Pot combines the unique performances of the AeroFlo with the simplicity of the WaterFarm.

Two models are available:
The Hydro version, with clay pellets, is great for beginners and professionals.During the hot days you can work with a Hydro DP and Grorox to protect the roots.And switch into faster gear with the Aero DP as soon as temperatures start to cool off.

Both versions exist in 2 sizes, 1 and 2 m2, and can grow from 12 to 60 plants (1 m2) or to 120 plants (2 m2).For some large plants, and to prevent a too quick roots growth which will invade your pots's drains , you must raise the conductivity of your nutrient solution. Depending on your plant, and when the root system is developed enough for a young adult plant, raise your EC to 2 or 2.5.

Each Dutch Pot comes with a set of Flora Series 1L and complete instructions.

• We continue to make custom orders, of course. Simply give us the characteristics of your project and we will make you an offer specifically adapted to your needs.
• For information on our commercial settings, please call your supplier or contact us directly. Our team of consultants will be happy to help you with technical advice and follow up.

The missing link: the Dutch Pot combines the unique performances of the AeroFlo with the simplicity of the WaterFarm.

Two models are available:
 

The Hydro version, with clay pellets, is great for beginners and professionals.During the hot days you can work with a Hydro DP and Grorox to protect the roots.And switch into faster gear with the Aero DP as soon as temperatures start to cool off.

Both versions exist in 2 sizes, 1 and 2 m2, and can grow from 12 to 60 plants (1 m2) or to 120 plants (2 m2).For some large plants, and to prevent a too quick roots growth which will invade your pots's drains , you must raise the conductivity of your nutrient solution. Depending on your plant, and when the root system is developed enough for a young adult plant, raise your EC to 2 or 2.5.

Each Dutch Pot comes with a set of Flora Series 1L and complete instructions.

• We continue to make custom orders, of course. Simply give us the characteristics of your project and we will make you an offer specifically adapted to your needs.
• For information on our commercial settings, please call your supplier or contact us directly. Our team of consultants will be happy to help you with technical advice and follow up.

Multi-Flow Flood and Drain Systems Product Details:

Multi-Flow Flood and Drain Systems are fully automated hydroponic systems that are incredibly effective. Multi-Flow Flood and Drain System take a lot of the manual work out of growing, all you need to do is keep your reservoir topped up with fresh nutrients and change your water on a weekly basis, the system takes care of everything else. The Multi-Flow Flod and Drain System works by using a brain bucket to automate your flood and drain cycle. The brain bucket has two float switches in it, when the timer is engaged it floods all the pots in the system automatically and the float switches prevent overflows and empty the system back to the reservoir afterwards.

Cross connector 16mm to 6mm

This quick adapter between the tank and the filter is very easy to use, you just need to connect it to the provided taps.

It has a filter that prevents impurities from entering the water along the pipeline, so it takes longer for the sludge to collect and clog.

T-joint piece 16-6mm, they are ideal to reduce the hose connection from 16mm to 6mm, in systems that include both.

They are inserted at the height of the adjacent Aquavalve and provide a completely watertight connection. They work exactly the same as the 16 to 6mm cross connectors, although this piece has only one end to connect with a 6mm tap, while the cross has two.

6mm Inline Valve

Cross connector 16mm to 6mm

6mm Barb Reducer Tee

6mm Top Hat Grommet 

16mm hose, to combine with all 6mm AutoPot systems.

6mm hose, to combine with all 6mm AutoPot systems.

Root control sleeves are designed to prevent roots from invading the Aquavalve valve, rendering it unusable.

Furthermore, the copper from which it is made is a fungicide. These covers are ideal for long crops or invasive root plants. They are also ideal for growers using aerial pruning geo-textiles in AutoPot systems.

Root Control Pad (Black / Gold)

Designed for flowerpots in AutoPot ™ irrigation systems. Suitable for 1Pot System, Easy2Grow Kit and 1Pot XL. It is placed in the system supports, under the pot itself, with the gold part up. The purpose is to prevent the root system from leaving the pot, protecting the functioning of the AQUAvalve water valve.

• Dimensions: 196x196mm

• Color: Black / Gold

ACCESSORY BAG EASY2GROW EXTENSION

INCLUDES:

• 1 UNION IN TEE OF 6 MM DIAMETER
• 1 UNION IN TEE OF 16-6 MM DIAMETER
• 1 AQUAVALVE VALVE
• 2 SQUARE COPPER ROOT CONTROL CASE (POTSOCK)
• 2 BLACK MARIX FILTERING MESH 186X186 MM
• 1 6mm DIAMETER HOSE

The Easy2Go Kit contains - AQUAvalve water valve with lid + fittings for connection to the AutoPot ™ irrigation system.

Protective lid for AQUAvalve.

The AQUAbox box incorporates AQUAvalve valve technology but is designed to be placed directly in the ground, the capillary pad draws water from AQUAbox and distributes it to the soil below.

The AQUAbox box guarantees irrigation of your plants for days or weeks at any time, making it the perfect irrigation solution for weekends, holidays and year-round watering.

AutoPot AQUAbox Straight includes:

• 1x AQUAbox Straight Body
• 1x AQUAvalve valve
• 1x circular Spirit level
• 1x 16mm-6mm built-in filter
• 1x AQUAbox Straight capillary pad
• 2m by 6mm pipe
• 1x full instructions

Tip: Make sure that the capillary stripes touch the bottom of the AQUAbox on both sides of the AQUAvalve valve after they have been wound.

The AQUAvalve water valve is a very effective irrigation device that stimulates phenomenal growth and maximum yield.

Spare filter for 30 and 47 liter tanks

The filter must always fit 30 and 47 liters of reservation in order to be clean in your systems.

Easy2Grow is a complete system that allows you to supply your plants with water and food without the need for pumps, timers, or electricity.

Spare pot saucer for 2 pots, designed for Easy2Grow irrigation system. You can put 8.5 and 15 liter pots (not included) in the pad. To work as part of an Easy2Grow irrigation system, you will need AQUAvalve + water valve fittings to it.

An optional set of 2 pots and a pad for them, designed to expand Easy2Grow irrigation systems.

The set contains:

• 1 pc x pad for 2 pots with lid
• 2 pcs x 8.5l pots
• 2 pcs x Marix disks - put in each pot to prevent soil / compost from leaving pots.
• 2 x Root Control pads - placed under each pot (the "gold" side is on top) to prevent roots from leaving the pots and directing them to the AQUAvalve
• 1 x AQUAvalve valve
• 1 pc x 1 m pipe 6 mm
• 1 x x 6mm T-twin

Autopot plastic pot

Features:

• Dimensions (cm): 24.5x20
• Capacity (L): 8.5
• Black color

The AutoPot Pot System is the ultimate in low maintenance growing systems.

Each system is fitted with a specially designed AQUAvalve that controls the flow of water/nutrient to your plants by simple gravity pressure from a tank or waterbutt. No pumps, no electricity, no mains water pressure and no timers are required. The AutoPot is a totally plant driven system that releases the right amount water to keep your plants happy day in day out. As there is no recirculating nutrient as with hydroponics systems, the AutoPot system requires no daily nutrient management meaning it can be left alone for long periods of time. All you need to do is remember to keep the tank topped up and the plants take care of the rest.

30L tank with cover and seal 6mm for AutoPot ™ systems:

• 1Pot - up to 2Pot
• easy2grow kit
• 1Pot XL / SmartPot XL
• easy2GO
• AQUAplate (1x Tray)

Always position your tank at a minimum of 150 mm above the highest installed AQUAvalve water valve. Keep in mind that this product includes only a tank with a cover and a sealing ring. Filter Golf 6mm should be purchased separately. The 47-liter tank is designed for the Easy2Grow irrigation system with 2 and 4 wells (pots). Includes lid with 6mm tube opening.

Dimensions: B / W / D 61.5cm / 37.5cm / 30cm

The AutoPot Pot System is the ultimate in low maintenance growing systems.

Each system is fitted with a specially designed AQUAvalve that controls the flow of water/nutrient to your plants by simple gravity pressure from a tank or waterbutt. No pumps, no electricity, no mains water pressure and no timers are required. The AutoPot is a totally plant driven system that releases the right amount water to keep your plants happy day in day out. As there is no recirculating nutrient as with hydroponics systems, the AutoPot system requires no daily nutrient management meaning it can be left alone for long periods of time. All you need to do is remember to keep the tank topped up and the plants take care of the rest.

47-liter (black\green) tank with pre-formed opening, without cover and 6mm sealing ring for AutoPot ™ systems:

• 1Pot - up to 6Pot
• easy2grow - up to easy2grow 4
• 1Pot XL / SmartPot XL - up to 4Pot XL / SmartPot XL
• easy2GO
• AQUAplate
• easy2Propagate

The AutoPot Pot System is the ultimate in low maintenance growing systems.

Each system is fitted with a specially designed AQUAvalve that controls the flow of water/nutrient to your plants by simple gravity pressure from a tank or waterbutt. No pumps, no electricity, no mains water pressure and no timers are required. The AutoPot is a totally plant driven system that releases the right amount water to keep your plants happy day in day out. As there is no recirculating nutrient as with hydroponics systems, the AutoPot system requires no daily nutrient management meaning it can be left alone for long periods of time. All you need to do is remember to keep the tank topped up and the plants take care of the rest.

Tank (black) with a capacity of 47 liters, designed for the Easy2Grow irrigation system. Includes lid with 6mm pipe opening and sealing ring at the bottom.

Suitable for systems:

• 1Pot - up to 6Pot
• easy2grow - to easy2grow 4
• 1Pot XL / SmartPot XL - up to 4 Pot XL / SmartPot XL
• easy2GO
• AQUAplate (1x Tray)
• easy2Propagate

Dimensions: B / W / D 61.5cm / 37.5cm / 30cm

The AutoPot Pot System is the ultimate in low maintenance growing systems.

Each system is fitted with a specially designed AQUAvalve that controls the flow of water/nutrient to your plants by simple gravity pressure from a tank or waterbutt. No pumps, no electricity, no mains water pressure and no timers are required. The AutoPot is a totally plant driven system that releases the right amount water to keep your plants happy day in day out. As there is no recirculating nutrient as with hydroponics systems, the AutoPot system requires no daily nutrient management meaning it can be left alone for long periods of time. All you need to do is remember to keep the tank topped up and the plants take care of the rest.

The 47-liter tank is designed for the Easy2Grow irrigation system with 2 and 4 wells (pots). Includes lid with 6mm tube opening.

Dimensions: B / W / D 61.5cm / 37.5cm / 30cm

The AutoPot Pot System is the ultimate in low maintenance growing systems.

Each system is fitted with a specially designed AQUAvalve that controls the flow of water/nutrient to your plants by simple gravity pressure from a tank or waterbutt. No pumps, no electricity, no mains water pressure and no timers are required. The AutoPot is a totally plant driven system that releases the right amount water to keep your plants happy day in day out. As there is no recirculating nutrient as with hydroponics systems, the AutoPot system requires no daily nutrient management meaning it can be left alone for long periods of time. All you need to do is remember to keep the tank topped up and the plants take care of the rest.

• 1pc - tank 47l, lid & 6mm sealing ring
• 1pc - pad for 2 pots and lid
• 2pcs - 8.5l pot
• 1pc - AQUAvalve screwdriver
• 1pcs - 6mm ribbed faucet
• 2pcs - marix discs mat
• 1pc - 1.5m of a 6mm pipe
• 1pc - 6mm golf filter

The AutoPot Pot System is the ultimate in low maintenance growing systems.

Each system is fitted with a specially designed AQUAvalve that controls the flow of water/nutrient to your plants by simple gravity pressure from a tank or waterbutt. No pumps, no electricity, no mains water pressure and no timers are required. The AutoPot is a totally plant driven system that releases the right amount water to keep your plants happy day in day out. As there is no recirculating nutrient as with hydroponics systems, the AutoPot system requires no daily nutrient management meaning it can be left alone for long periods of time. All you need to do is remember to keep the tank topped up and the plants take care of the rest.

The AutoPot Pot System is the ultimate in low maintenance growing systems.

Each system is fitted with a specially designed AQUAvalve that controls the flow of water/nutrient to your plants by simple gravity pressure from a tank or waterbutt. No pumps, no electricity, no mains water pressure and no timers are required. The AutoPot is a totally plant driven system that releases the right amount water to keep your plants happy day in day out. As there is no recirculating nutrient as with hydroponics systems, the AutoPot system requires no daily nutrient management meaning it can be left alone for long periods of time. All you need to do is remember to keep the tank topped up and the plants take care of the rest.

Kit Contents

• 1x 47 ltr tank, lid & 6mm top hat grommet
• 3x 2Pot tray and lid
• 6x 8.5 litre pots
• 3x AQUA valve
• 2x 6mm inline tap
• 6x root control discs
• 6x marix discs
• 1x 4 metres of 6mm pipe
• 1x 6mm golf filter
• 3x 6mm tee

The AutoPot Pot System is the ultimate in low maintenance growing systems.

Each system is fitted with a specially designed AQUAvalve that controls the flow of water/nutrient to your plants by simple gravity pressure from a tank or waterbutt. No pumps, no electricity, no mains water pressure and no timers are required. The AutoPot is a totally plant driven system that releases the right amount water to keep your plants happy day in day out. As there is no recirculating nutrient as with hydroponics systems, the AutoPot system requires no daily nutrient management meaning it can be left alone for long periods of time. All you need to do is remember to keep the tank topped up and the plants take care of the rest.

Kit Contents

• AutoPot 2Pot Extension Kit x 12
• Waterbutt 100ltr x 1
• Waterbutt Stand 100ltr x 1
• Clickfit Tank Adapter & Filter to 16mm o.d Pipe x 1
• Green Hose 16mm o.d (1/2ins) Per 1m x 3
• Flow Control Tap Barbed 16mm (1/2ins) x 1
• Cross Connector 16mm o.d (13mm i.d) to 6mm o.d (4mm i.d) x 3 

The AutoPot Pot System is the ultimate in low maintenance growing systems.

Each system is fitted with a specially designed AQUAvalve that controls the flow of water/nutrient to your plants by simple gravity pressure from a tank or waterbutt. No pumps, no electricity, no mains water pressure and no timers are required. The AutoPot is a totally plant driven system that releases the right amount water to keep your plants happy day in day out. As there is no recirculating nutrient as with hydroponics systems, the AutoPot system requires no daily nutrient management meaning it can be left alone for long periods of time. All you need to do is remember to keep the tank topped up and the plants take care of the rest.

Contains:

- 1x 225 liter FlexiTank or a solid green 225 liter tank
- 1x 16 mm click adapter for tank and filter
- 1x 8m 16mm tube
- 2 x 16 mm Tail
- 1x 16 mm connector
- 6x cross connector 16mm-6mm
- 12x 2 pots for pots and lid
- 24x 8.5l pots
- 12x AQUAvalve
- 1 x 6 meters from a 6mm pipe
- 24x marix disk
- 24x control disc

The AutoPot Pot System is the ultimate in low maintenance growing systems.

Each system is fitted with a specially designed AQUAvalve that controls the flow of water/nutrient to your plants by simple gravity pressure from a tank or waterbutt. No pumps, no electricity, no mains water pressure and no timers are required. The AutoPot is a totally plant driven system that releases the right amount water to keep your plants happy day in day out. As there is no recirculating nutrient as with hydroponics systems, the AutoPot system requires no daily nutrient management meaning it can be left alone for long periods of time. All you need to do is remember to keep the tank topped up and the plants take care of the rest.

Kit Contents.

• AutoPot 2Pot Extension Kit x 48
• Flexi Tank 400ltr x 1
• Clickfit Tank Adapter & Filter to 16mm o.d Pipe x 1
• Green Hose 16mm o.d (1/2ins) Per 1m x 15
• Flow Control Tap Barbed 16mm (1/2ins) x 3
• Cross Connector 16mm o.d (13mm i.d) to 6mm o.d (4mm i.d) x 12 
• Elbow Barbed 16mm (1/2ins) x 2
• Cross Barbed 16mm (1/2ins) x 1

The AutoPot Pot System is the ultimate in low maintenance growing systems.

Each system is fitted with a specially designed AQUAvalve that controls the flow of water/nutrient to your plants by simple gravity pressure from a tank or waterbutt. No pumps, no electricity, no mains water pressure and no timers are required. The AutoPot is a totally plant driven system that releases the right amount water to keep your plants happy day in day out. As there is no recirculating nutrient as with hydroponics systems, the AutoPot system requires no daily nutrient management meaning it can be left alone for long periods of time. All you need to do is remember to keep the tank topped up and the plants take care of the rest.

Kit Contents:

• 1 pc - Flexitank 750l tank
• 1 pc - 16mm click-fit tank adapter and filter
• 5 pcs - 16 mm faucet
• 1 pc - 16 mm cross
• 25 pcs - 16mm-6mm cross
• 1 pc - 25 m tube - 16 mm
• 2 pcs. - 16mm triple
• 50 pcs - pad for 2 pots and lid
• 100 pcs - 8.5l pots
• 50 pcs - AQUAvalve screw
• 1 pc - 25 m tube - 6 mm
• 100 pcs - marix discs mat
• 100 pcs - root control disc pad

The Neptune hydroponics 100 Litre FlexiTank revolutionises water storage, it is everything you need in one compact box.

It requires no tools for assembly, reduces storage and shipping costs and takes minutes to assemble. It really couldn’t be simpler. Unlike other waterbutts and barrels, the Tank can be stored away when not used, can fit where other tanks cannot go and is adaptable in ways standard tanks are not.

• Box size and weight - 74x18x13cm/1.9kg
• Fits where other tanks cannot go
• Easy to ship and store
• Capacity 100 litres

The AutoPot 100 Litre FlexiTank revolutionises water storage, it is everything you need in one compact box.

It requires no tools for assembly, reduces storage and shipping costs and takes minutes to assemble. It really couldn’t be simpler. Unlike other waterbutts and barrels, the AutoPot Flexi Tank can be stored away when not used, can fit where other tanks cannot go and is adaptable in ways standard tanks are not.

• Box size and weight - 74x18x13cm/1.9kg
• Fits where other tanks cannot go
• Easy to ship and store
• Capacity 100 litres

The AutoPot 225 Litre FlexiTank revolutionises water storage, it is everything you need in one compact box. 

It requires no tools for assembly, reduces storage and shipping costs and takes minutes to assemble. It really couldn’t be simpler.  Unlike other waterbutts and barrels, the AutoPot Flexi Tank can be stored away when not used, can fit where other tanks cannot go and is adaptable in ways standard tanks are not.

• Box size and weight - 80x18x13cm/3kg
• Fits where other tanks cannot go
• Easy to ship and store
• Capacity 225 litres

This water tank comes in a small cardboard box, but once installed you have a robust water tank with all necessary options.

The Aqua King foldable water barrel is made of heavy-duty, puncture resistant, non-toxic PVC tarp, UV-resistant for strength, durability and weather-resistance. The water tank is equipped with a zip it cover, which prevents dirt from entering your water and comes complete, including overflow and hose valve. You can easily and quickly connect a garden hose, through a click connector.

Features:

• Foldable rain barrel
• Heavy-duty
• Inlet on top of the water tank
• Supplied with drain valve
• Equipped with zip it cover
• Easy to transport and easy storage
• Easy assembly in just a few minutes
• Green color, discrete in any garden
• An easy-access zipper to keep leaves and debris from going inside the rain barrel
• Available in 100L - 160L - 250L - 380L - 500L and 750L

The AutoPot 400 Litre FlexiTank revolutionises water storage, it is everything you need in one compact box.

It requires no tools for assembly, reduces storage and shipping costs and takes minutes to assemble. It really couldn’t be simpler. Unlike other waterbutts and barrels, the AutoPot Flexi Tank can be stored away when not used, can fit where other tanks cannot go and is adaptable in ways standard tanks are not.

• Box size - 112x18.5x13cm
• Fits where other tanks cannot go
• Easy to ship and store
• Capacity 400 litres

The AutoPot 500 Litre FlexiTank revolutionises water storage, it is everything you need in one compact box.

It requires no tools for assembly, reduces storage and shipping costs and takes minutes to assemble. It really couldn’t be simpler. Unlike other waterbutts and barrels, the AutoPot Flexi Tank can be stored away when not used, can fit where other tanks cannot go and is adaptable in ways standard tanks are not.

• Fits where other tanks cannot go
• Easy to ship and store
• Capacity 500 litres

The AutoPot 750 Litre FlexiTank revolutionises water storage, it is everything you need in one compact box.

It requires no tools for assembly, reduces storage and shipping costs and takes minutes to assemble. It really couldn’t be simpler. Unlike other waterbutts and barrels, the AutoPot Flexi Tank can be stored away when not used, can fit where other tanks cannot go and is adaptable in ways standard tanks are not.

• Fits where other tanks cannot go
• Easy to ship and store
• Capacity 750 litres

The AutoPot 780 Litre FlexiTank revolutionises water storage, it is everything you need in one compact box.

It requires no tools for assembly, reduces storage and shipping costs and takes minutes to assemble. It really couldn’t be simpler. Unlike other waterbutts and barrels, the AutoPot Flexi Tank can be stored away when not used, can fit where other tanks cannot go and is adaptable in ways standard tanks are not.

• Fits where other tanks cannot go
• Easy to ship and store
• Capacity 780 litres

Complete Irrigation Kit 2 m2

Composition:

- Table support 101 * 204 * 47 / 45cm.
- Cultivation table 1.06 * 2.03m.
- 90 L container
- HT dropper 4 l / h (20 pcs.) X 2
- Submersible pump Neptune Hydroponics NH - 2000.
- 16 mm polyethylene tube х 8m
- Parts Bags (5 elbows 16mm + 1 "T" 16 mm + 1 punch).

Great for making home made and diy dripper hydroponic kits and systems.

Great for making home made and diy dripper hydroponic kits and systems.

• 294500007(Container square (e.g. tanks, plant pots 90L)
• 61615002(Digital timer )
• A-POMP(Pump Coupling for VIP-Pump )
• PVC001+(PVC-Tube 32 x 1,8mm, 3m / price per meter, predrilled every 20cm f. jet dist)
• DV-BST100(Dummy Plugs, 100 pcs., 3/8 in. WW threaded plug for holes in PVC ducts)
• DV-8PVC(Jet distributor with 8 x 1 m drip hoses )
• PVC-140(Straight coupling 32 mm - 32 mm )
• PVC-120(PVC Elbow, 32 mm - 32 mm )
• PVC-110(PVC End cap, 32 mm )
• PVC-100(PVC-Connection adapter 3/4" (Ext.Thr.) x 32 mm, 16 bar)
• PVC-K(Tangit Adhesive 250 ml )
• A-VIP(Submersion Pump, 7000 L/h, 400 W, 1" pump elevation 8 m, w / o float switch)
• L23/69 Box, 785 x 585 x 505 mm

Set of sediment filter and charcoal filter.

Suitable for systems:

• Eco Grow 240 L / h
• Power Grow 20L / h
• Mega Grow 40 L / h
• MAXQUARIUM 000 PPM 20L / hr