The innovative GARDENA Water Smart Flow Meter allows targeted irrigation that is measured and mindful

At a glance, you can see

1. the water consumption per day,

2. the water consumption per season,

3. the water consumption per watering session

4. the current flow in litre per minute.

The consumed water quantity can be read at any time on the large display and thereby controlled. With a single button for all functions, the Water Smart Flow Meter is easy to use. Until now, irrigation has been a matter of personal judgment and one's form on the day.

The Water Smart Flow Meter ensures that you have better control. From now on, you can water in a targeted, requirement-suitable and systematic way. This is good for the garden, the environment, and the wallet. The Water Smart Flow Meter is battery-operated and can be immediately connected to the tap, to a sprayer, a sprinkler or a pump.

The robust and impact-proof Water Smart Flow Meter is simply clicked onto the Threaded Tap Connector or Standard Hose Connector and immediately supplies important data through active measurement. An integrated battery-level display secures precise operation. This innovative meter raises awareness of water consumption.

INSTRUCTIONS MANUAL YOU CAN DOWNLOAD FROM HERE

The MC122 pH controller and dosing pump (MP810) provides fully automated pH control of aqueous solutions in hydroponic systems.

It has been specifically designed to control the pH in mixing tanks for fertilization. The small and precise flow of the peristaltic pump allows you to maintain ideal pH values in your tank.

After selecting the desired pH setting from 5.5 to 9.5 pH, the pH controller measures the pH value of the solution and automatically adds pH adjustment (acid or alkaline) to change the liquid’s pH to the selected level.

The MC Monitors are designed to continuously monitor pH, EC or TDS values directly in your reservoir.

An LED alarm is activated and flashes when the pH, EC or TDS level rises either Above or Below (user selected) that set-point. All these instruments run on a 12V adapter so there's no need to worry about failed batteries and each unit comes with mounting kit, probe, probe holder and calibration solution.

• Professional pH monitor especially designed for use with aquariums.
• User selectable Hi/Low Set Point 
• Manual 2 points calibration 
• Visual LED alarm 
• Supplied with 12 VDC adapter, mounting kit, and 20ml pH 7.01 calibration solution 
• Double junction pH electrode with 2m cable (BNC connector)

The MC Monitors are designed to continuously monitor pH, EC or TDS values directly in your reservoir.

Each unit features a user selectable set-point. An LED visual alarm is activated and flashes when the pH, EC or TDS level rises either Above or Below (user selected) that set-point. 

All these instruments run on a 12V adapter so there's no need to worry about failed batteries and each unit comes with mounting kit, probe, probe holder and starter calibration solution.

• Professional EC - Conductivity Monitor
• User selectable Hi/Low Set Point 
• Manual 1 point calibration 
• Visual LED alarm 
• Supplied with 12 VDC adapter, mounting kit, and 20ml 1413 µS/cm calibration solution 
• MA812/2 EC Conductivity Probe with 2m cable (BNC connector)

The MC Monitors are designed to continuously monitor pH, EC or TDS values directly in your reservoir.

An LED alarm is activated and flashes when the pH, EC or TDS level rises either Above or Below (user selected) that set-point. All these instruments run on a 12V adapter so there's no need to worry about failed batteries and each unit comes with mounting kit, probe, probe holder and calibration solution.

• Professional pH monitor especially designed for use with aquariums.
• User selectable Hi/Low Set Point 
• Manual 2 points calibration 
• Visual LED alarm 
• Supplied with 12 VDC adapter, mounting kit, and 20ml pH 7.01 calibration solution 
• Double junction pH electrode with 2m cable (BNC connector)

ROOT!T's electronic temperature controller is compatible with all heat mats and is an optional accessory for the ROOT!T Heat Mats.

The thermostat controls the temperature of heat mats evenly in colder or warmer than normal environments. It provides constant optimum temperatures for specific plants. It has an easy plug-in operation with an illuminated indicator.

Features: 

• Easy to use and control 
• Temperature control
• range 20ºC to 42ºC 
• Controls temperature of heat mats evenly in colder/warmer than normal environments 
• Provides constant optimum temp for specific plants. 
• Easy plug-in operation 
• Indicator light 
• Simple to use 

Temperature Digital LED Heat Mat Thermostat Controller for Seed Germination Reptiles and Brewing

• IDEAL TEMP CONTROL - Improve propagation rates by maintaining root zone temperatures between 68-108°F (20-42°C); Provide constant optimum temperatures for specific plants and controls temperature in colder or warmer environments
• COMPACT CONSTRUCTION - High-quality plastic housing with a protective film on front panel with ample durability ensures it will not rust or malfunction under tough conditions; Suction cup on the power cord helps to fix the sensor probe to the target
• LED INDICATOR - Included illuminated LED screen display is easy to read and the program will help you to keep in mind the current temperature and read in even dark environments; Easily switch between Celsius and Fahrenheit to meet your needs
• EASY SET-UP - Simply plug the mat into the thermostat then place the temperature probe at the desired location; The 3 sensitive buttons interface makes a smooth operation and can easily be calibrated; Compatible with almost all heat mats
• SAFETY GUARANTEED - Heat mat can be safely plugged into an angled 3-end outlet socket that is UL certified, which also prevents cords from tangling and supports a 1000W power load; Equipped with a 5.8 ft-long power cord and a 6.4 ft-long probe cord, it is ideal for wherever you need to place

The Gavita Master controller EL2 has two outputs for optional External Contactor Modules (ECMs).

• The come with localized male and female plugs so that installing auxiliary equipment is just a matter of plug and play.
• Never guess anymore if a contactor is switched on or off: the LED on the ECM clearly shows the status of the contactor.
• Mount it right next to the equipment you want to control, and just plug in the (safe, low voltage) control wire in the ECM and the controller.

• ECM Voltage 120-240V
• ECM Current 15A AC3
• ECM Switch type DPST (Double pole, single throw)
• ECM AC terminals Male and female plug (depending on market and voltage), 40 cm / 1’ 4” cords
• ECM Steering Input Low voltage from controller, cage clamps
• ECM On-indication Blue LED
• Warranty 3 years

Gavita Master controller EL2

Maximum control, ease of use, safety and easy installation. Simply connect the controller cables to your module using the included T-splitter, set the modules to EXT (external control), connect the module and controller to the mains and you are ready to use your lighting system.

The controller can turn on and off all modules connected to it (Model EL2 can control two separate rooms with up to 40 ballasts in each, or just one with up to 80 ballasts), can adjust the desired level of light emitted by the modules (percentage or as absolute value) and even mimics sunrise and sunset, by gradually starting and stopping the lamps when they are turned on and off.

Gavita Master controller EL1

 
Lighting control at your fingertips!

Using a Gavita Master controller to control your e-series fixtures offers you maximum control, ease of use, plug and play installation and safety. Just connect the controller cables to the fixtures with the included T-splitter (see diagram), set the dials on the fixtures to EXT (External control), plug the controller and the fixtures directly into mains and you are set to go.

The controller can switch all the interconnected fixtures on and off with its internal timer, adjust them to your required output level (in percentage or exact output power) and even simulate sunrise and sunset to gradually adjust the climate in your grow room when your lights go on or off. This electronic controller replaces expensive lighting timers and contactors while preventing ballast current in-rush when switching on your lights.

Two very important features are the autodim function and emergency shut-down. When the temperature in your grow room rises beyond the control level of your climate control your crop can be damaged beyond recovery. The temperature probe senses this and will automatically dim the lights to not overshoot your safe temperature, and maintain it. The display and warning LED indicate when this happens, and also indicate if this has happened while you were away so you can correct the problem. If for any reason your climate control completely fails and the temperature rises to unacceptable levels the system will perform an emergency shutdown of all connected equipment. The alarm contact of the controller can be connected to your alarm system for instant notification.

You can connect all your e-series fixtures to one controller.
 

Master controller are able to control the lights to simulate sun rise and sunset.

You can customize the operating time as you want. It provides the excellent care for your indoor growing environment

- 2 MODES:  master controller has "follow mode" and "inverse mode". Follow mode requires to put only one sensors close to rooms' climate control system so that both sensors are exposed to the same temperature. Inverse mode requires to use both sensors in different room, so 2 sensors will execute inverse action, you can choose to control the lights in which room.

-CLEAR INTERFACE: master controller contains multiple functions with simple button control. Clear digital screen can accuratly indicate your settings, status and controller menu.

-SAFETY CONTROL master controller is designed with 2 quality sensors for checking temperature in all time.You can set your desired temperature so that it will automatically dim the lights when the temperature reach a specific level and turn off the lights if it reaches another temperature. "Main" and "aux" jacks each can be connected up to 80 ballasts (160 as total).

Smart controller sensor

• length: 3m
• amperage: 6.5A

The SMSCOM Smart Controller is a compact ventilation controller in a plug housing.

Maximum current is 6.5 amperes. The SMSCOM Smart Controller is electronically controlled and provides a simple, accurate method for the correct temperature of your room (NTC* needs to be attached). The SMSCOM Smart Controller continuously regulates the correct speed for your fans and reserves the right temperature.

The SMSCOM fan controller is ideal for dimming down your intake or exhaust fan.

The system ensures a constant air flow. With the left dial you can pre-set your fan on a minimum speed it will run at, in order to operate more efficiently, stealthily and with greater control over temperature and humidity. 

THE SMARTEST FAN CONTROLLER ON THE MARKET

When used as fan controller:

The fancontroller works as a manually adjustable dimmer. You can set the fan speed with the left control knob. Just plug your fan into the controller - ready to go! 

Attention!

• The right control knob has got no function, until a temperature sensor is plugged in!
• Use as Smart Controller (you need the temperature sensor):
• After you connected the fan controller with the temperature sensor, you can set the desired room temperature with the right control knob. The smart controller automatically adjusts the fans speed, to ensure that the set temperature is satisfied.
• If the temperature in the room decreases below the set temperature, the fan will decrease down to the set minimum speed on the left dial. Perfect for nighttime temperature fluctuations! 
• The SMSCOM Smart Controller is a powerful little unit that has thermostat controlled Motion Flow technology to continuously regulate the room. The smart sensor technology continuously measures the temperature of the room and regulates the fan speed accordingly, keeping your plants happier and also reducing electricity bills!

• Plug and play, no wiring necessary
• Made in Holland
• Max load 6.5 amp
• Very smooth fan speed adjustment
• Reduced power consumption
• Increased energy efficiency in your production cultivation

Faran Humidistat HR-EHSA humidity controller

No neccessary of additional unit for installation. Easy to use with its simple constructure. Manufactured to use for only one humidifier since the capacity of internal switch is only 2.2 ampere. High durability and trouble free.

SPECIFICATIONS:

- Measurement : 10%~80%(rH%)

- Accuracy : +/- 5%

- Operation span : 3%

- Openration method : ON/OFF

- Capacity of microswitch : 2.2A

- Temperature : 10~40(Centigrade degree)

- Sensor type : Nylon Loop

- Dimension : 140H X 95L X 45W(mm)

- Power supply : 110V(220V) / 60Hz(50HZ)

- Power cord : 2m

Tempcon VDL is a temperature controller that is responsible of switching on/off heaters or coolers depending on the needings of your growroom.

Temperature controller Tempcon by VDL has an in-built probe that allows it to boot/shut-down all deviced connected to through it, to make more efficient the use of heaters or air conditioners.

VDL Tempcon is a plug-in temperature controller, that lets your switch on/off enviromental devices when detecting temperatures lower or upper than set up.

Tempcon has two main functions:

• Keep minimum temperature under control.
• Keep maximum temperature under control.
• One chosen the function we want Temcon set our devices to work, it will only be necessary to set up the temperature to keep.

Tempcon allows growers to connect heaters, fans, extractors, air conditioners or any electronic device that might be used for increasing/decreasing temperature.

• Maximum load: 16A - 3680w (resistive) / 16A - 480W (inductive).
• Temperature range: 0ºC to 40ºC.
• Precision +/- 1ºC.

Humicon is a wall socket unit which is able to control an extractor according to the level of humidity.

This unit comes with an option of connecting a humidifier or dehumidifier. This unit is completely digital and constantly displays the current humidity of the environment.

• Maximum charge: 16 A - 3680 W (resistive) 16 A - 460 W (Inductive)
• Control range: 30 - 90 %
• Operating temperatures: 0 - 40 ºC
• Precision: ± 5% 

It regulates the speed of lights from 0 to 300W.

The lights in our growing place can be connected to the power regulator reducing or increasing the lights' strenght.

Specifications:

- Cornwall Electronics
- Power regulator
- LED power indicator
- Voltage: 230V
- Frequency: 50Hz / 1.6A
- 0-300W

Analog timer for automatic control of home appliances, heating systems, lighting.

Turns on and off the connected equipment (lamp, pump, water tank heater). It can be programmed at intervals.

The analog Grässlin timer is a high-quality and safe switch.

The switch is safe up to 16-amp as opposed to the cheap switches in the stores.

Specifications:

• Suitable for  220 to 240 Volts 50 Hz
• Switching capacity of 16A
• Power consumption 5 VA
• Suitable for temperatures between -10 degrees and +55 degrees
• Adjustable per quarter
• With manual on / off switch

Grässlin is a German manufacturer of electronic devices, including timers, thermostats and controls for lighting.

This timer is not suitable to switch HPS lamps. The timer is suitable as a switch for energy saving lamps, TL and LED lighting. To connect HPS lighting we recommend a switch with a relay

Programmable, digital timer-contact (daily / weekly) with 6 programs.

Possibility to turn on and off household electrical appliances every 1 minute (step-1 min.) 24-hour electronic time relay.Easy to program with up to 8 on / off. per day or 56 on / off. per week. I want an LCD display with built-in battery.

- "Random" (random)
- "Summer time" function
- Countdown timer from 1 min. To 10 hours
- Built-in NiMH rechargeable battery for up to 100 hours.

Specifications:

- U = 220-240 V
- AC / 50Hz
- I = 16 A;
- P = 3000 W

24 hour, 7 Day, 2 pin, Topica 600

Grasslin Topica plug in time switch which is suitable for use with a wide variety of domestic and office place environments

• LCD display
• 2 pin
• 1 minute minimum switching time
• Manual switch, run display and switching state display
• Fixed weekday block formation
• Random generator which retards the switching command from 1 - 45 minutes
• 3 year running reserve

The T15 series can switch on and off devices (fans, heaters, alarms) at a set temperature. The T15 series is intended for single-phase use.

Benefits:

• Low investment
• Easy to install
• Easy to operate
• Durable and robust
• Applicable for both new and existing ventilation systems

Feature T15-WD 
Switches single phase devices on and off at a set temperature

Gravity feed and main pressure irrigation controller

The PLANT!T® Water Timer can be used with mains water from a tap outlet or with a gravity feed system from a tank, water butt or reservoir. Simply select the time you want the water supply to be turned on and off, link up to your irrigation dripper line and the timer will do the rest.

Key Features:

• 2 easy steps to programme – turn RUN TIME dial to desired irrigation time and turn FREQUENCY dial to desired time you want between irrigations.

Benefits:

• Ideal for gravity feed allotment systems to control feed from a water butt/reservoir
• Weather resistant
• Operated with two 1.5v AAA alkaline batteries (not included) that can last a full season without needing to be changed
• Auto safety valve shut-off when battery power is low and programme delay button for when you need to do plant maintenance work and don’t want to be irrigating
• Comes with all required fittings and inline filter

Suitable for the control of irrigation systems in the domestic sector, such as lawn sprinkler, sprinklers, drip house, etc. 

- High quality plastic material, wear resistant and anti-corrosion
- Automatic and intelligent, easy to operate
- Rubber gasket design, leak-proof and tightly sealing
- Hose connection: 13mm - suitable for all known plug-in systems
- Water temperature: Less than 40 degree
- Water connection: 21mm tap with 26.5mm thread
- Batteries: 2 x AAA batteries ( not included )
- Bearable water pressure: 1 - 4KG

100% Brand New & High Quality 

Automatic and comprehensive watering service for your garden.
This Timer must be used only for the control of irrigation system, like lawn sprinkler, sprinklers, etc. 
 
 

• Material: Plastic
• Weight: 0.33Kg
• Water Connection: 21mm tap with 26.5mm thread 
• Hose connection: 13mm (1/2 ") - Suitable for all known plug-in systems 
• Water Pressures: 0-400Kpa
• Water Temperature:. 0-40  o C
• Procedure: Singel/Multi Procedure, Routine, Cycle, Single Day, Multi Days
• Irrigation Frequency: min 1 time/day, max 16 times/day, max 1 time/3 days. 
• Irrigation Time: min 1 minute, max 9 hours 59 minutes
• LCD Display: Standard Time/ Status of Irrigation Control
• Switch: Automatic/Manual
• Batteries: 2x 1.5V AAA size batteries 

The DV-101А is a multifunctional digital seconds time clock that helps you to water crops time controlled.

• Dimensions in mm: 210 x 115 x 110.
• Voltage: 230 V
• AC/ 50 Hz.
• Max. power: 5 Amps.
• Isolation level: IP-44

Control your indoor climate effectively with TechGrow’s Clima Control

The Clima Control lets you connect two fans at the same time. It features the very clear, concise menu you are familiar with and which also allows you to read out min/max values on the display. Because of its simple menus and its handy Push & Turn Button, the Clima Control is easy to use by anyone and everyone. The unique calibration menu enables you to determine how much power is needed for 10% speed and 90% speed for adjusting every box, regardless of its size.

The Clima Control only controls temperature, however, it can also display values of other connected sensors. Compatible with many other TechGrow devices.
Available in 4.5A, 7A and 14A versions.

Features:

• The Clima Control can measure, display and register min/max values of connected CO2, humidity-, and temperature sensors.
• All settings are saved in case of power outages.
• Display shows min/max values of its connected sensor(s).
• The display is refreshed every second.
• LED indicator for light detection and stable climate.
• The fan can be operated automatically or manually.
• The fan-control is adjustable in steps of 10%.
• Includes a unique feature where the fan can be adjusted in two simple steps.
• Features a unique calibration menu for adjusting every box, regardless of the size.
• Automatically turns off the backlight of the display after 60 seconds.
• Automatically detects broken cable or bad connection of the connected sensors.
• Connecting the sensor is done with a standard network cable (UTP).
• Available in 4.5A, 7A en 14A versions.
• Connectable to multiple TechGrow devices.
• Multiple sensors are seperately available.
• Possibility to connect the Techgrow Datalogger (DL-1).

Controlling your indoor climate with the TechGrow Clima Control Basic Plus is simple but effective.

Setting the Clima Control Basic Plus is a snap with its handy rotary buttons. Its simple appearance is misleading as the Clima Control Basic Plus is packed with the reliable and advanced TechGrow technology you are used to.

The bright green LED display shows the current temperature, and the set-point while adjusting.This controller comes with a pre-mounted temperature probe on a 4.5 meter (15ft) cable.

Features:

• Plug & Play.
•  LED display for set point and current temperature.
•  Very easy to operate.
• Adjustment range temperature: 10.0 – 45.0 C.
• Adjustment range temperature hysteresis: 1.0 – 7.0 C.
• Adjustable minimum en maximum fan power.
• Pre-mounted temperature probe on a 4.5 meter cable.(15ft.)
• Analog control buttons for simple adjustments of settings.
• Two sockets for fans.
• Easy to connect.
• Easy to replace Fuse.
• Spare fuse included.
• Available in 4.5A, 7A and 14A versions.
• Power supply: 110V to 240V.

Control your indoor climate effectively with TechGrow’s Clima Control

The Clima Control lets you connect two fans at the same time. It features the very clear, concise menu you are familiar with and which also allows you to read out min/max values on the display. Because of its simple menus and its handy Push & Turn Button, the Clima Control is easy to use by anyone and everyone. The unique calibration menu enables you to determine how much power is needed for 10% speed and 90% speed for adjusting every box, regardless of its size.

The Clima Control only controls temperature, however, it can also display values of other connected sensors. Compatible with many other TechGrow devices.
Available in 4.5A, 7A and 14A versions.

Features:

• The Clima Control can measure, display and register min/max values of connected CO2, humidity-, and temperature sensors.
• All settings are saved in case of power outages.
• Display shows min/max values of its connected sensor(s).
• The display is refreshed every second.
• LED indicator for light detection and stable climate.
• The fan can be operated automatically or manually.
• The fan-control is adjustable in steps of 10%.
• Includes a unique feature where the fan can be adjusted in two simple steps.
• Features a unique calibration menu for adjusting every box, regardless of the size.
• Automatically turns off the backlight of the display after 60 seconds.
• Automatically detects broken cable or bad connection of the connected sensors.
• Connecting the sensor is done with a standard network cable (UTP).
• Available in 4.5A, 7A en 14A versions.
• Connectable to multiple TechGrow devices.
• Multiple sensors are seperately available.
• Possibility to connect the Techgrow Datalogger (DL-1).

Controlling your indoor climate with the TechGrow Clima Control Basic Plus is simple but effective.

Setting the Clima Control Basic Plus is a snap with its handy rotary buttons. Its simple appearance is misleading as the Clima Control Basic Plus is packed with the reliable and advanced TechGrow technology you are used to.

The bright green LED display shows the current temperature, and the set-point while adjusting.This controller comes with a pre-mounted temperature probe on a 4.5 meter (15ft) cable.

Features:

• Plug & Play.
•  LED display for set point and current temperature.
•  Very easy to operate.
• Adjustment range temperature: 10.0 – 45.0 C.
• Adjustment range temperature hysteresis: 1.0 – 7.0 C.
• Adjustable minimum en maximum fan power.
• Pre-mounted temperature probe on a 4.5 meter cable.(15ft.)
• Analog control buttons for simple adjustments of settings.
• Two sockets for fans.
• Easy to connect.
• Easy to replace Fuse.
• Spare fuse included.
• Available in 4.5A, 7A and 14A versions.
• Power supply: 110V to 240V.

This EC fan controller have temperature, minimum- and maximum speed setting on three knobs. It is easy to use.

The EC fan controller get supplied with a 4m long cable including a 3.5mm 4pole stereo jack connector to the fan and a 4m long Temperature senor.  It comes as a finish product together with a power supply. The eutput signal is 0-10V or on demand a PWM (pulse wide modulation) signal. If the EC-fan support a PWM signal the controller is able to run without power supply.

Settings range:

• Temperature: 20C° to 30C°
• Minimum speed: off, 20% to -100%
• Maximum speed: 100% to -50%

This EC fan controller have temperature, humidity and minimum speed setting on three knobs.

It is easy to use. The EC fan controller get supplied with a 4m long cable with a 3.5mm 4pole stereo jack connector to the fan and a 4m long Temperature senor.  It comes as a finish product together with a power supply. The eutput signal is 0-10V or on demand a PWM (pulse wide modulation) signal. If the EC-fan suppolt PWM signal the controller is able to run without power supply.

Settings range:
Temperature: 20C° to 30C°
Humidity: 30% - 100%
Minimum speed: off, 20% to -100%

Boxing relay switches two independent circuits - stopped them and release them.

It is operated by a third power cord that must be plugged into a timer switch or GSE timer box. Each of electricity networks can withstand 4x600W (total svetlinie 8x600W).

Sizes and technical data's:

• Case: WxHxD = 180x130x60mm
• Timer box: WxHxD = 160x100x90mm
• Volt: 2x230V / 50Hz
• Relays: 4x16A 230V
• Protection class: IP54

This digital fan controller is a temperature dependent speed controller for rooms with intake and exhaust fans.

The fan controller keeps the room temperature constant and at a certain minimum speed. The digital fan controller is a temperature dependent speed controller for rooms with air flow in and out. The fan controller keeps the room temperature constant and under pressure to prevent odour from escaping. This fan controller can by used also as only air out regulator on two fans if there is a nature way of air in.

Sizes and technical data's:

• Case: WxHxD = 130x80x70mm
• Controller: WxHxD = 160x100x90mm
• Designed for: 10A / 2300W / TRIAC 1x16A
• Volts: 230V / 50HZ
• Digital sensor 5V Measures temperatures from –55°C to +125°C (–67°F to +257°F)
• 0.5°C accuracy from –10°C to +85°C
• Protection class: IP54

Humidity control could make the difference between a crop’s success and its failure.

This accurate plug and play controller for either a humidifier or dehumidifier makes controlling this environmental condition easy.

The unit comes complete in a waterproof casing, IP 44 rated, with a compatible mains socket with hinged lids, and a digital low voltage sensor, making it the perfect controller for humid rooms. Simply plug the unit in between the power supply and the humidifier or dehumidifier, set the desired humidity range, and let the controller take control.

The sensor is supplied with a 4-meter cable.

Sizes and technical data:

• Housing: WxHxD = 130x80x70mm
• Humidity Controller:
• WxHxD = 160x100x90mm
• Power requirements: (Mains) Voltage: 230V/50Hz, 8Amp (3A inductive)
• Digital Sensor: 5V Measures temperatures from -55 ° C to +125 ° C
• (-67 ° F to +257 ° F) 0.5 ° C accuracy from -10 ° c to +85 ° C
• Humidity accuracy ± 4.5% RH
• Protection class: IP54

This digital temperature, minimum-, maximum- speed controller with hysteresis setting is a temperature depended speed controller for ventilated rooms with one or more exhaust fans.

The controller keeps the temperature constantly and impedes to run under the set minimum-speed, as well to run over the set maximum speed. The hysteresis defines the temperature range. It can be easily controlled, adjusting the required temperature minimum-, maximum speed and hysteresis on four knobs.

Sizes and technical data's:

• Case: WxHxD = 130x80x70mm
• Controller: WxHxD = 160x100x90mm
• Designed for: 1A / 200W / TRIAC 1x16A
• Volts: 230V / 50HZ
• Digital sensor 5V Measures temperatures from –55°C to +125°C (–67°F to +257°F)
• 0.5°C accuracy from –10°C to +85°C
• Protection class: IP54

THE PERFECT GSE SYSTEM FOR HYDROPONICS INDOOR GROWING

The Gse Water Timer is used to control irrigation systems and water pumps in hydroponics systems. The timer with an off function schedules the irrigation adn can be set separately for day and night irrigation.

The unit for indoor growing comes complete in a waterproof housing with hinged lids, compatible mains sockets and a built in light sensor with 4m low voltage cable which detects day/night-time; making it the perfect controller for humid rooms.

WATER TIMER GSE: SIZES AND TECHNICAL DATA

• Housing: WxHxD = 130x80x70mm
• Irrigation timer: WxHxD = 145x100x90mm
• Designed for: 2300W 10A (ind. 3A)
• Voltage: 230V / 50Hz
• Protection class: IP54

EC LCD controller for 2fans

This EC fan controller with LCD display, keyboard and power led allows a very easy setting and reading of all the information's given by the fan such as actual set speed, temperature, humidity day/night, negative pressure of the intake fan and rounds per minute of the exhaust fan. A built in light sensor in the probe recognize day/night modes. The EC fan controller comes with power adaptor 1m cable, a 4m sensor cable and 2x 4m fan cable including all connectors 4pole 3.5mm jack. It ready to use.

You can program 15 individual settings with only three buttons

Features:
-Temperature day
-Temperature hysteresis day
-Humidity day
-Humidity hysteresis day
-Minimum speed day
-Maximum speed day
-Temperature night
-Temperature hysteresis night
-Humidity night
-Humidity hysteresis night
-Minimum speed night
-Maximum speed night
-Negative pressure setting
-Switch sensor level
-Switch over time day/night

LCD display:
-Graphic and digital display of speed rpm constant
-Temperature display constant
-Humidity display constant
-Set point selectable not constant, over input keys

This digital temperature, minimum-, maximum- speed controller with hysteresis setting is a temperature depended speed controller for ventilated rooms with one or more exhaust fans (up to 600 watt).

The controller keeps the temperature constantly and impedes to run under the set minimum-speed, as well to run over the set maximum speed. The hysteresis defines the temperature range. It can be easily controlled, adjusting the required temperature minimum-, maximum speed and hysteresis on four knobs.

Sizes and technical data's:

• Case: WxHxD = 130x80x70mm
• Controller: WxHxD = 160x100x90mm
• Designed for: 10A 2300W
• Volts: 230V / 50HZ
• Digital sensor 5V Measures temperatures from –55°C to +125°C (–67°F to +257°F)
• 0.5°C accuracy from –10°C to +85°C
• Protection class: IP54

This digital fan controller is a temperature dependent speed controller for rooms with intake and exhaust fans.

The fan controller keeps the room temperature constant and under pressure to prevent odour from escaping. The digital fan controller is a temperature dependent speed controller for rooms with air flow in and out. The fan controller keeps the room temperature constant and under pressure to prevent odour from escaping. This fan controller can by used also as only air out regulator on two fans if there is a nature way of air in.

Sizes and technical data's:

• Case: WxHxD = 130x80x70mm
• Controller: WxHxD = 160x100x100mm
• Designed for: 2x5A / 2x1150W (2300W) / TRIAC 2x16A
• Volts: 230V / 50HZ
• Digital sensor 5V Measures temperatures from –55°C to +125°C (–67°F to +257°F)
• 0.5°C accuracy from –10°C to +85°C
• Protection class IP54

This digital fan controller is a humidity and temperature dependent speed controller for rooms with intake and exhaust fans (2 x 600watt).

The fan controller keeps the room humidity and temperature constant and under pressure to prevent odour from escaping.

Settings range:

• Temperature: 20C° - 30C°
• Humidity: 30% - 100%
• Minimum speed: off, 20% - 100%
• Negative pressure: 100% - 50%

AC-EC LCD fan controller for 2fans 2x5A

This AC-EC fan controller with LCD display, a rotary push knob allows a very fast setting of all the values and reading of all the information's given by the fan such as actual set speed, temperature, humidity day/night, negative pressure of the intake fan and RPM (rounds per minute) of the EC-exhaust fan. A built in light sensor in the probe recognise day/night modes. Two 5A/230V AC exits for intake and exhaust fan, in parallel you have 2xRJ45 connector and you can choose between 0-10V or PWM (pulse wide modulation) signal.

2 internal temperature sensors prevent from overheating on the heat sink and processor side. The AC-EC fan controller comes with power cable 1.5m, 4m sensor cable. It is ready to use. You can program 15 individual settings with rotary push button.

Features:

-Temperature day
-Temperature hysteresis day
-Humidity day
-Humidity hysteresis day
-Minimum speed day
-Maximum speed day
-Temperature night
-Temperature hysteresis night
-Humidity night
-Humidity hysteresis night
-Minimum speed night
-Maximum speed night
-Negative pressure setting
-Switch sensor level
-Switch over time day/night

LCD display:

-Graphic and digital display of speed rpm constant
-Temperature display constant
-Humidity display constant
-Set point selectable not constant, over input keys

The Advanced Control Unit is a professional timer & contactor system for turning on 4 x 600w lights.

• This system will turn on 4 x 600w lights in groups of 2 with a 25 second delay between each group. 
• The benefit of this is that you do not have a large start up power surge by turning all the lights on at once. 
• This is relevant as a light typically requires about 20% extra ampage to 'start up' as opposed to when they are up and running.

CONTROL ALL OF YOUR LIGHTS WITH ONE CONTROL UNIT WITH ADDED HEATING CONTROL

The Advanced GSE Control Unit is a professional indoor growing timer & contactor system for turning on 4 x 600w lights.

ABOUT THIS CONTROL UNIT FOR INDOOR CULTIVATION

• This system is  will turn on 4 x 600w lights in groups of 2 with a 25 second delay between each group. 
• The benefit of this is that you do not have a large start up power surge by turning all the lights on at once. 
• This model includes a heating socket which turns on when lights are off (power management).

A CONTROL UNIT FOR INDOOR GROWING CAN MANAGE UP TO 6X600W LAMPS

The Advanced GSE Control Unit for grow box manage the indoor lighting of plants, is a professional timer & contactor system for turning on 6 x 600w lights.

FEATURES OF THIS CONTROL UNIT FOR GROW ROOM

• This system will turn on 6 x 600w lights in groups of 2 with a 25 second delay between each group. 
• The benefit of this is that you do not have a large start up power surge by turning all the lights on at once. 
• This model includes a heating socket which turns on when lights are off (power management).

A CONTROL UNIT FOR INDOOR GROWING CAN MANAGE UP TO 6X600W LAMPS

The Advanced GSE Control Unit for grow box manage the indoor lighting of plants, is a professional timer & contactor system for turning on 6 x 600w lights.

FEATURES OF THIS CONTROL UNIT FOR GROW ROOM:

• This system will turn on 6 x 600w lights in groups of 2 with a 25 second delay between each group. 
• The benefit of this is that you do not have a large start up power surge by turning all the lights on at once. 
• This model includes a heating socket which turns on when lights are off (power management)

YOU CAN MANAGE UP TO 8 GROW LIGHTS AT THE SAME TIME

This relay box for indoor growing switches two indipendent power circuits on and off. It's controlled by a third power cord which needs to be plugged to a commercial timer or a GSE timer box.

Each power circuit can handle 4x600W 

SIZES AND TECHNICAL DATA:

• Case: WxHxD = 180X130X60MM
• Timer box: WxHxD = 160x100x90mm
• Volt: 2x230V / 50Hz
• Relays: 4x16A 230V
• Protection class: IP44

YOU CAN MANAGE UP TO 8 GROW LIGHTS AT THE SAME TIME

This relay box for indoor growing switches two indipendent power circuits on and off. It's controlled by a third power cord which needs to be plugged to a commercial timer or a GSE timer box.

Each power circuit can handle 4x600W (total 8x600W lights).

SIZES AND TECHNICAL DATA:

• Case = 180x130x60mm
• Timer box: WxHxD = 160x100x90mm
• Volt: 2x230V / 50Hz
• Relays: 4x16A 230V
• Protection class: IP44

TIMER BOX II DELAYS THE LIGHTING AND HEATING

The GSE Control Unit (Timer Box II) is a professional indoor growing timer & contactor system for turning on 6 x 600w lights.

ABOUT THIS CONTROL UNIT FOR INDOOR CULTIVATION

The timer box is used by several inductive loads such as high-pressure lamps with high switch on and off simultaneously. This turns on Contactor/Relay 4x600W loads.Model with heating socket is on when lights are off (power management)