Lighting

If you need quality LED lighting at the best price, LUMii BLACK 720W LED is a great choice!

The 720W Horticulture LED Grow Lights have 6 LED panels, a high-quality chip and efficient LEDs, which generate a full spectrum for every stage of your plants' development.
A light source suitable for the entire development cycle from vegetative to the end of flowering. The lamp has a regulator (dimmer) for adjusting the power according to the needs of the plants and their stage of development.

The 720W SE LED light produces a high PPF (Photosynthetic Photon Flux) of 1656 μmol/s and photon efficiency (device efficiency) - 2.4 μmol/J.

The LED light can be fully controlled by the TOMAX digital panel or another control system that uses a 0-10V output signal.

Llambë HPS premium - për rritjen dhe lulëzimin Llamba HPS për rritjen dhe lulëzimin Double Ended - me dy pika kontakti. Llamba ka një kabllo në secilën anë, e cila eliminon nevojën për një strukturë brenda trupit për të mbështetur kabllon. Mungesa e kësaj strukture eliminon hijet në traun e emetuar. Vetëm për përdorim horizontal. Lloji: HPS Periudha: rritja dhe lulëzimi Socket: E40 Fuqia (W): 1000

Flexstar Undercanopy LED light 120W - lamp for flowering and growth. A suitable light source for the entire development cycle from vegetative to the end of flowering. There are 2 mounting options for the luminaire, suitable for different applications:

Our Classic polymer lenses color balance blurple (blue + purple) or magenta spectrum LED lighting with 100% UV protection. A flash silver lens coating attenuates bright grow room lights. These grow room glasses meet or exceed CSAZ94 & ANSI Z87+S Sta

*Not for use under full spectrum LED lights.

This reflector is characterized by its absolute durability.
Centering the reflector and the cross beam from the reflector to the bracket gives a high degree of stability and thus makes it an ideal reflector even for heavier lamps such as energy saving ones.
 
 
Characteristics:

- Material: Putty (86% reflection)
- Dimensions 47 cm x 47 cm

- base E40

- for 400/600 W HPS/MH lamps

- with cable - 5 meters

The TOMAX 645W SE LED Grow Light has 6 LED panels, a high-quality driver and efficient LEDs, which generate a full spectrum for each stage of your plants' development.

A suitable light source for the entire development cycle from vegetative to the end of flowering. The lamp has a regulator (dimmer) for adjusting the power according to the needs of the plants and the stage of their development.


The TOMAX 645W SE LED produces a high PPF (Photosynthetic Photon Flux) of 1548 µmol/s and photon efficiency (device efficiency) - 2.4 µmol/J.


The TOMAX LED can be fully controlled by the TOMAX digital panel or another control system that uses a 0-10V output signal.

Cable with connector (male) for ballasts.Suitable for binding and extension of the connection.

Set of two two cables, each with a thickness 2x0,75mm: 

 

• 2 m with plug for connection to the network 
• 2.5 m to connect the ballast to the lamp

Cable with a plug for connecting devices to the power supply.Cable length: 1.5m

The NewliteVision glasses are designed to get the best vision in your indoor marijuana cultivation, and for this reason they are made ​​of marterials of high quality and technology, that allow us to perceive the bright light of the bulb as if it was sunlight, without alter the color of our plants.

 

 

Their blue lenses have been specially designed to correct the orange colour resulting from the sodium light in your culture, giving us total freedom and comfort when working.

Moreover, they not only fulfill a purely practical function, but also they will protect our eyes from the rays of sodium lamps and from the splash of products or nutrient solutions used, increasing our security.

 

Features of Glasses Newlite Vision protection Standard HPS:

 

• Front support for lenses and temples.
• Blue lenses.
• Dark glasses, to be used with sunlight outdoors.
• Magnification, for a bit of expansion. Totally optional, will be located between our eye and the lens.
• Grip tape to increase the attachment to the head. Just remove the pins and replace them by the tape.
• Compact neoprene case with zipper.

 

The NewliteVision glasses are designed to get the best vision in your indoor marijuana cultivation, and for this reason they are made ​​of marterials of high quality and technology, that allow us to perceive the bright light of the bulb as if it was sunlight, without alter the color of our plants.

 

 

Their blue lenses have been specially designed to correct the orange colour resulting from the sodium light in your culture, giving us total freedom and comfort when working.

Moreover, they not only fulfill a purely practical function, but also they will protect our eyes from the rays of sodium lamps and from the splash of products or nutrient solutions used, increasing our security.

Available in two versions, Standard and Full Pack Equipe.

 

Features of Glasses Newlite Vision protection Standard HPS:

 

• Front support for lenses and temples.
• Blue lenses.
• Grip tape to increase the attachment to the head. Just remove the pins and replace them for the tape.
• Blister to save and protect your glasses.

Growroom lenses are specifically designed to reduce the glare from HID, HPS and CFL grow lamps, so you can see your plants in a more natural light.

 

 

It's easier to identify pests and disease problems without having to turn off your grow lights. They also protect the eye from UV and IR rays.

Protective case for growroom glasses

 

 

Thanks to the protective glasses, the growers can observe their plants indoors without the strong light hindering their eyes. Keeping this accessory is just as important! That durable case will help you when you do not use your glasses.

 

 

• black color
• length: 16cm

Metal halides have the more balanced spectrum.

 

The light they give out has a significant amount of light from the bluer end of the spectrum, which the plant uses to grow vegetatively. It produces plants with a small internodal length, with large leaves and thick stems. It produces the most natural looking plants. It simulates the light from the beginning of the year and is good for plants before they're switched into flowering mode.

 

 

They're normally slightly more expensive than HPS. Recently, there have been 'enhanced spectrum' MH bulbs produced which also give off a significant amount of red light. Conversion bulbs are also available which plug into HPS ballasts which are actually MH bulbs. Useful for changing the light balance without changing the ballasts also. In the event of a power failure, they need about 20 minutes before restating.

They may restart earlier but it shortens the life of the bulb quite dramatically to try and start a hot bulb.

 

• Power Plant HIT/HBU/LU Metal Halide Lamp - 250 watt.
• Power Plant Metal Halide lamps promote optimum vegetative growth and flowering.
• Provides a richer more nutritious light
• Compatible with standard HPS ballasts and ignitor systems. Lamps can simply be changed to maximise growth protential.250w hps = 23,000 lumens

The Green Eye with remote control is a 2 in 1 bulb that can be used as an ordinary threaded bulb (E27 socket) and as a flashlight by extending the handle.

 

To use as a bulb, simply remove the tread and place the lamp in the holder. In this mode, the internal battery is charged simultaneously.

For use as a flashlight, the pin is screwed on and the handle is extended. There is also a practical remote control that allows you to place it fixed at a point and remotely connect or disconnect.

 

Features:

• Number of Led: 30
• Power (W): 4
• Battery type: Lithium
• Dimensions (mm): Ø70x11.5 / 14.5 cm
• Voltage (V): 85/265

This green light is also used to illuminate areas in indoor cultivation over night to achieve the treatments (including foliar applications) and maintenance of culture without disturbing the dark period of the plants.

 

 

Ideal for large plant cultures.

 

 

• Line Voltage [V]: 220-240V
• Cap/Base: E27
• Bulb finish: Green
• Lamp - type: PAR 38 Coloured
•  

LED Headlight

 

 

• Extensive Lifetime of LED (100,000 hrs)
• Comfort Wearing on your head 
• Adjustable elastic head strap 
• Adjustable inclination 
• Four mode: 1LED on, 7LEDs on, 19LEDs on, 19LEDs flash 
• Durable and low power consumption 
• Rainproof, you can use it in a rainy day 
• Powered by 3 AAA batteries (not include) 
• Dimension: 120mm x 26mm x 35mm 

LED Flashlight with green light for monitoring plant growth

 

Durable, with nine powerful high intensity LED bulbs that provide 100,000+ hours of life. Uses three AAA batteries (not included).

TIMER BOX II DELAYS THE LIGHTING AND HEATING (3 PHASE)

 

The GSE Control Unit (Timer Box III) is a professional indoor growing timer & contactor system for turning on 6 x 600w lights.

 

 

ABOUT THIS CONTROL UNIT FOR INDOOR CULTIVATION

The timer box is used by several inductive loads such as high-pressure lamps with high switch on and off simultaneously. This turns on Contactor/Relay 4x600W loads.Model with heating socket is on when lights are off (power management)

YOU CAN MANAGE UP TO 8 GROW LIGHTS AT THE SAME TIME (3PHASE)

 

SIZES AND TECHNICAL DATA:

 

• Size: 500x160x115mm
• Voltage: AC 230V / 400V 50-60 Hz
• Power: 7200W (32A)
• Heating: up to 2400w (resistive loads)
• Mechanical timer: 24h automatically / manually
• Setting interval: 15 minutes
• Mechanical endurance of relays: 10,000,000 cycles
• Protection class: IP54

CONTROL ALL OF YOUR LIGHTS WITH ONE CONTROL UNIT WITH ADDED HEATING CONTROL (3PHASE)

 

 

The Advanced GSE Control Unit is a professional indoor growing timer & contactor system for turning on 4 x 600w lights.

 

 

ABOUT THIS CONTROL UNIT FOR INDOOR CULTIVATION

• This system is  will turn on 4 x 600w lights in groups of 2 with a 25 second delay between each group. 
• The benefit of this is that you do not have a large start up power surge by turning all the lights on at once. 
• This model includes a heating socket which turns on when lights are off (power management).

TIMER BOX II DELAYS THE LIGHTING AND HEATING

 

 

 

The GSE Control Unit (Timer Box II) is a professional indoor growing timer & contactor system for turning on 6 x 600w lights.

 

 

ABOUT THIS CONTROL UNIT FOR INDOOR CULTIVATION

 

The timer box is used by several inductive loads such as high-pressure lamps with high switch on and off simultaneously. This turns on Contactor/Relay 4x600W loads.Model with heating socket is on when lights are off (power management)

TIMER BOX II DELAYS THE LIGHTING AND HEATING

 

 

The GSE Control Unit (Timer Box II) is a professional indoor growing timer & contactor system for turning on 6 x 600w lights.

 

 

 

 

ABOUT THIS CONTROL UNIT FOR INDOOR CULTIVATION

 

 

The timer box is used by several inductive loads such as high-pressure lamps with high switch on and off simultaneously. This turns on Contactor/Relay 4x600W loads.Model with heating socket is on when lights are off (power management)

YOU CAN MANAGE UP TO 8 GROW LIGHTS AT THE SAME TIME

 

 

This relay box for indoor growing switches two indipendent power circuits on and off. It's controlled by a third power cord which needs to be plugged to a commercial timer or a GSE timer box.

Each power circuit can handle 4x600W (total 8x600W lights).

 

SIZES AND TECHNICAL DATA:

 

• Case = 180x130x60mm
• Timer box: WxHxD = 160x100x90mm
• Volt: 2x230V / 50Hz
• Relays: 4x16A 230V
• Protection class: IP44

YOU CAN MANAGE UP TO 8 GROW LIGHTS AT THE SAME TIME

 

 

This relay box for indoor growing switches two indipendent power circuits on and off. It's controlled by a third power cord which needs to be plugged to a commercial timer or a GSE timer box.

Each power circuit can handle 4x600W 

 

 

SIZES AND TECHNICAL DATA:

• Case: WxHxD = 180X130X60MM
• Timer box: WxHxD = 160x100x90mm
• Volt: 2x230V / 50Hz
• Relays: 4x16A 230V
• Protection class: IP44

 

A CONTROL UNIT FOR INDOOR GROWING CAN MANAGE UP TO 6X600W LAMPS

 

 

The Advanced GSE Control Unit for grow box manage the indoor lighting of plants, is a professional timer & contactor system for turning on 6 x 600w lights.

 

 

FEATURES OF THIS CONTROL UNIT FOR GROW ROOM:

• This system will turn on 6 x 600w lights in groups of 2 with a 25 second delay between each group. 
• The benefit of this is that you do not have a large start up power surge by turning all the lights on at once. 
• This model includes a heating socket which turns on when lights are off (power management)

A CONTROL UNIT FOR INDOOR GROWING CAN MANAGE UP TO 6X600W LAMPS

 

The Advanced GSE Control Unit for grow box manage the indoor lighting of plants, is a professional timer & contactor system for turning on 6 x 600w lights.

 

FEATURES OF THIS CONTROL UNIT FOR GROW ROOM

• This system will turn on 6 x 600w lights in groups of 2 with a 25 second delay between each group. 
• The benefit of this is that you do not have a large start up power surge by turning all the lights on at once. 
• This model includes a heating socket which turns on when lights are off (power management).

CONTROL ALL OF YOUR LIGHTS WITH ONE CONTROL UNIT WITH ADDED HEATING CONTROL

 

The Advanced GSE Control Unit is a professional indoor growing timer & contactor system for turning on 4 x 600w lights.

 

ABOUT THIS CONTROL UNIT FOR INDOOR CULTIVATION

• This system is  will turn on 4 x 600w lights in groups of 2 with a 25 second delay between each group. 
• The benefit of this is that you do not have a large start up power surge by turning all the lights on at once. 
• This model includes a heating socket which turns on when lights are off (power management).

The Advanced Control Unit is a professional timer & contactor system for turning on 4 x 600w lights.

 

• This system will turn on 4 x 600w lights in groups of 2 with a 25 second delay between each group. 
• The benefit of this is that you do not have a large start up power surge by turning all the lights on at once. 
• This is relevant as a light typically requires about 20% extra ampage to 'start up' as opposed to when they are up and running.

Boxing relay switches two independent circuits - stopped them and release them.

 

 

It is operated by a third power cord that must be plugged into a timer switch or GSE timer box. Each of electricity networks can withstand 4x600W (total svetlinie 8x600W).

 

Sizes and technical data's:

• Case: WxHxD = 180x130x60mm
• Timer box: WxHxD = 160x100x90mm
• Volt: 2x230V / 50Hz
• Relays: 4x16A 230V
• Protection class: IP54

24 hour, 7 Day, 2 pin, Topica 600

 

 

Grasslin Topica plug in time switch which is suitable for use with a wide variety of domestic and office place environments

• LCD display
• 2 pin
• 1 minute minimum switching time
• Manual switch, run display and switching state display
• Fixed weekday block formation
• Random generator which retards the switching command from 1 - 45 minutes
• 3 year running reserve

Programmable, digital timer-contact (daily / weekly) with 6 programs.

 

 

Possibility to turn on and off household electrical appliances every 1 minute (step-1 min.) 24-hour electronic time relay.Easy to program with up to 8 on / off. per day or 56 on / off. per week. I want an LCD display with built-in battery.

 

- "Random" (random)
- "Summer time" function
- Countdown timer from 1 min. To 10 hours
- Built-in NiMH rechargeable battery for up to 100 hours.

   

Specifications:

- U = 220-240 V
- AC / 50Hz
- I = 16 A;
- P = 3000 W

The analog Grässlin timer is a high-quality and safe switch.

 

 

The switch is safe up to 16-amp as opposed to the cheap switches in the stores.

 

Specifications:

 

• Suitable for  220 to 240 Volts 50 Hz
• Switching capacity of 16A
• Power consumption 5 VA
• Suitable for temperatures between -10 degrees and +55 degrees
• Adjustable per quarter
• With manual on / off switch

 

Grässlin is a German manufacturer of electronic devices, including timers, thermostats and controls for lighting.

This timer is not suitable to switch HPS lamps. The timer is suitable as a switch for energy saving lamps, TL and LED lighting. To connect HPS lighting we recommend a switch with a relay

Analog timer for automatic control of home appliances, heating systems, lighting.

 

 

 

Turns on and off the connected equipment (lamp, pump, water tank heater). It can be programmed at intervals.

It regulates the speed of lights from 0 to 300W.

 

 

The lights in our growing place can be connected to the power regulator reducing or increasing the lights' strenght.

 

 

Specifications:

- Cornwall Electronics
- Power regulator
- LED power indicator
- Voltage: 230V
- Frequency: 50Hz / 1.6A
- 0-300W

Master controller are able to control the lights to simulate sun rise and sunset.

 

 

You can customize the operating time as you want. It provides the excellent care for your indoor growing environment

- 2 MODES:  master controller has "follow mode" and "inverse mode". Follow mode requires to put only one sensors close to rooms' climate control system so that both sensors are exposed to the same temperature. Inverse mode requires to use both sensors in different room, so 2 sensors will execute inverse action, you can choose to control the lights in which room.

 

-CLEAR INTERFACE: master controller contains multiple functions with simple button control. Clear digital screen can accuratly indicate your settings, status and controller menu.

 

-SAFETY CONTROL master controller is designed with 2 quality sensors for checking temperature in all time.You can set your desired temperature so that it will automatically dim the lights when the temperature reach a specific level and turn off the lights if it reaches another temperature. "Main" and "aux" jacks each can be connected up to 80 ballasts (160 as total).

 

 

 

Gavita Master controller EL1

 

 
Lighting control at your fingertips!

 

Using a Gavita Master controller to control your e-series fixtures offers you maximum control, ease of use, plug and play installation and safety. Just connect the controller cables to the fixtures with the included T-splitter (see diagram), set the dials on the fixtures to EXT (External control), plug the controller and the fixtures directly into mains and you are set to go.

 

The controller can switch all the interconnected fixtures on and off with its internal timer, adjust them to your required output level (in percentage or exact output power) and even simulate sunrise and sunset to gradually adjust the climate in your grow room when your lights go on or off. This electronic controller replaces expensive lighting timers and contactors while preventing ballast current in-rush when switching on your lights.

 

Two very important features are the autodim function and emergency shut-down. When the temperature in your grow room rises beyond the control level of your climate control your crop can be damaged beyond recovery. The temperature probe senses this and will automatically dim the lights to not overshoot your safe temperature, and maintain it. The display and warning LED indicate when this happens, and also indicate if this has happened while you were away so you can correct the problem. If for any reason your climate control completely fails and the temperature rises to unacceptable levels the system will perform an emergency shutdown of all connected equipment. The alarm contact of the controller can be connected to your alarm system for instant notification.

 

You can connect all your e-series fixtures to one controller.
 

 

Gavita Master controller EL2

 
 

Maximum control, ease of use, safety and easy installation. Simply connect the controller cables to your module using the included T-splitter, set the modules to EXT (external control), connect the module and controller to the mains and you are ready to use your lighting system.

 

The controller can turn on and off all modules connected to it (Model EL2 can control two separate rooms with up to 40 ballasts in each, or just one with up to 80 ballasts), can adjust the desired level of light emitted by the modules (percentage or as absolute value) and even mimics sunrise and sunset, by gradually starting and stopping the lamps when they are turned on and off.

The Gavita Master controller EL2 has two outputs for optional External Contactor Modules (ECMs).

• The come with localized male and female plugs so that installing auxiliary equipment is just a matter of plug and play.
• Never guess anymore if a contactor is switched on or off: the LED on the ECM clearly shows the status of the contactor.
• Mount it right next to the equipment you want to control, and just plug in the (safe, low voltage) control wire in the ECM and the controller.

• ECM Voltage 120-240V
• ECM Current 15A AC3
• ECM Switch type DPST (Double pole, single throw)
• ECM AC terminals Male and female plug (depending on market and voltage), 40 cm / 1’ 4” cords
• ECM Steering Input Low voltage from controller, cage clamps
• ECM On-indication Blue LED
• Warranty 3 years

Effective lighting in professional greenhouses!

 

Gavita 750w EL DE is one of the best lamps on the market. Specially designed for high frequency electronic ballasts, it has a base on each side, eliminating the need for framed wire inside the lamp. The absence of a wire frame eliminates any shadows in the reflection. Instead of being vacuumed, the housing is filled with gas, which allows a smaller tubular arc, improving optical control. For use with any double-ended luminaire.

 

 

Specifications:

 

• HPS EL DE (double-ended) lamp
• 750W, 400V
• Shape: K12x30S
• Luminous flux: 85,000 lumens
• PPFD: 1450µMol
• Efficiency after one year of work (about 5000 hours) -> 96%
• Developed for electronic ballasts

The Gavita HortiStar 600 reflectors are available with a Vega aluminum reflector, which can be replaced if necessary without even having to unscrew the bulb from the socket.

 

The set is suitable for use with HPS / MH lamps with power up to 750W. Installation is easy - with only two bolts.

Reflectors lose more than 5% efficiency, on average, per year due to deposits, dust accumulation and oxidation. This is a valuable light that cannot reach your plants. Tests show that it is almost impossible to clean reflective material without damaging it, and for this reason Gavita believes that it is important that the reflectors you use are made of the best materials and that parts of the reflector can be replaced if necessary.

 

• Suitable for any HPS or MH lamp with power up to 750W
• High quality Vega aluminum HortiStar HR 96 reflector
• 96% light reflection
• Professional and compact design
• Interchangeable reflective surface
• Durable and safe
• Easy installation with just two bolts
• CE logo 75px

Gavita Pro 600 is available as a complete set including professional HortiStar HR 96 reflector or as a separate ballast perfect fit with Gavita

 

 

Triple Star reflector. The ballast is completely closed and no cooling fan, as emits very little heat during operation, allowing safe and easy installation in close proximity to your light, which in turn reduces the amount of electromagnetic interference which reach the ballast and prolongs life considerably and its efficiency. The kit is easily installed by two screws.

Gavita Pro e-series are improved models of the already existing classic series of lighting modules of Gavita, now compatible and adapted for complete lighting control via Gavita Master controller.

 

 

You can now control the light with just a few simple keystrokes.

Gavita Pro HPS modules are a professional standard for efficient lighting. Operating on standard 240V, they power high-voltage (400V) electronic crop lamps, which are superior to conventional ones in terms of spectrum, light emitted and lamp efficiency with prolonged use.

• New! Module for 600W EL lamps, with possibility for full control, by means of Gavita Master controller.
• The set includes a Gavita Pro 600W 400V EL lamp with a capacity of 1120 μmol s-1.
• Illuminates more than 1 sq.m. with 1000 μmol s-1.
• The 600 watt module with the highest light emission on the market, using a 400V EL lamp.
• Compatible with Gavita Master controller.
• Easy installation - plug and use.

New in the e-series of the Pro line is the 6 / 750e DE FLEX module, which uses the recently developed Gavita Pro 750W DE 400V EL lamp.

 

 

The operating range of the lamp is 400-825W, which takes up a huge difference between 600 and 1000 watt lamps. We called it 6/750 DE FLEX because it is equally efficient when running at 600 watts as it is at 750. In many cases, it is appropriate to replace a 1000 watt ventilated module running at 825W, which can save you up to 20% electricity . The emission of the lamp operating at 750W is 1500 μmol s-1 (2μmol s-1 per watt).

 

Gavita Pro HPS modules are a professional standard for efficient lighting. Operating on standard 240V, they power high-voltage (400V) electronic crop lamps, which are superior to conventional ones in terms of spectrum, light emitted and lamp efficiency with prolonged use.

 

 

• Fully encapsulated wiring with ventilation outlet made of GORE-TEX, without moving parts, completely quiet and almost imperceptible heat dissipation.
• Compatible with high frequency electronic (400V) agricultural lamps, which have 10-25% higher light emission.
• Highly efficient - retains more than 95% of its light-reflecting properties, so you only need to change the bulb once a year.
• Replaceable Gavita HR96 reflector with 96% reflectivity for maximum efficiency.
• Controlled emission: With one knob, increase or decrease the amount of light supplied, according to the conditions or stages of development of your plants.
• A system for "soft" reduction of light, allowing gradual reduction of the emitted light, which eliminates the stress on the lamp when changing the current supplied to it.
• Equipped with high frequency (> 100kHz) Gavita electronics.
• No problems created by electromagnetic interference.

 

Classical series lighting modules Gavita

 

 

In the kit is included Gavita Pro 1000W 400V DE EL lamp. The most efficient and highest radiation pattern of the market (Class of efficiency: A ++). 

 

• For use only with 1000W 400V DE EL lamps
• No acoustic resonance
• Up to 8% more light than a lamp
• Efficiency after 5000 hours of work -> 95%
• Design and concept of the system by Gavita
• Sealed (class I) with ventilation outlet made by Gore Tex
• Microprocessor controlled with LED ballast status indicator
• Professional UV resistant wiring
• Driver efficiency at full power - 95-96%
• Extremely low heat dissipation and optimal cooling
• professional HortiStar HR 96 1000 DE reflector

New Gavita Pro E-series with improved models of existing classical series lighting modules Gavita, already compatible and adapted for complete lighting control via Gavita Master kontroler.

 

 

V kit included Gavita Pro 1000W 400V DE EL lamp. The most efficient and highest radiation pattern of the market (Class of efficiency: A ++) .Savmestim with Gavita Master controller. Lights more than 2 m.