PH
Milwaukee pH controller with pump MC720
The MC122 pH controller and dosing pump (MP810) provides fully automated pH control of aqueous solutions in hydroponic systems.
It has been specifically designed to control the pH in mixing tanks for fertilization. The small and precise flow of the peristaltic pump allows you to maintain ideal pH values in your tank.
After selecting the desired pH setting from 5.5 to 9.5 pH, the pH controller measures the pH value of the solution and automatically adds pH adjustment (acid or alkaline) to change the liquid’s pH to the selected level.
monitor Milwaukee pH MC110
The MC Monitors are designed to continuously monitor pH, EC or TDS values directly in your reservoir.
An LED alarm is activated and flashes when the pH, EC or TDS level rises either Above or Below (user selected) that set-point. All these instruments run on a 12V adapter so there's no need to worry about failed batteries and each unit comes with mounting kit, probe, probe holder and calibration solution.
- Professional pH monitor especially designed for use with aquariums.
- User selectable Hi/Low Set Point
- Manual 2 points calibration
- Visual LED alarm
- Supplied with 12 VDC adapter, mounting kit, and 20ml pH 7.01 calibration solution
- Double junction pH electrode with 2m cable (BNC connector)
monitor Milwaukee pH MC110
The MC Monitors are designed to continuously monitor pH, EC or TDS values directly in your reservoir.
An LED alarm is activated and flashes when the pH, EC or TDS level rises either Above or Below (user selected) that set-point. All these instruments run on a 12V adapter so there's no need to worry about failed batteries and each unit comes with mounting kit, probe, probe holder and calibration solution.
- Professional pH monitor especially designed for use with aquariums.
- User selectable Hi/Low Set Point
- Manual 2 points calibration
- Visual LED alarm
- Supplied with 12 VDC adapter, mounting kit, and 20ml pH 7.01 calibration solution
- Double junction pH electrode with 2m cable (BNC connector)
Milwaukee Digital pH 600 Тester
pH 600 Specifications
- Range 0.0 - 14.0
- pH Resolution 0.1
- pH Accuracy ± 0.1 pH
- Calibration 1 Point (7.0) - Manual
- Environment 32 - 122F
- Display LED
- Battery Life 700 hours of use
- Battery Type 1.5v Button - 3 Included
Milwaukee pH meter pH51/pH54
Тhese tools are widely used.
With an IP65 waterproof housing and replaceable probe, the tester is suitable for many applications, such as a measuring instrument from wastewater treatment to agriculture. The modular design allows easy replacement of probe and battery.
PH54 is a waterproof pH tester with 2 points for manual calibration, ± 0.1 pH accuracy and a range from 0.0 to 14.00 pH.
Specifications:
- Measuring range: 0.0 - 14 pH
- Resolution: 0.1 pH
- Accuracy: + -0.1 pH
- Environment: 0 to 50 ° C; max. RH 100%
- Calibration: manually at 2 points using trimmers
- Electrode: MA73600 (replaceable)
- Power supply: 3x 1.5V (included)
- Battery life:> 1500 hours of continuous use
- Dimensions: 165 x 30 x 30 mm
Calibration:
- Immerse the switched off tester in a glass of tap water
- Move it while it is still switched off in buffer solution 7.0
- Unscrew the cap and use the supplied screwdriver to set the display to 7.0
- Dip the tester briefly in the glass of tap water and shake gently
- Immediately move the tester to buffer solution 4.0
- Use the supplied screwdriver to set the display to 4.0
- your tester is calibrated!
Milwaukee pH meter pH55
pH55 Pocket-size pH / Temperature Meter with replaceable electrode
IP65 Waterproof pH tester with Large dual-level LCD that displays pH and temperature (°C or °F). The large display shows readings in an extended range from -2.0 to 16.0 pH and simultaneously shows temperature from -5.0 to 105.0°C or 23.0 to 221.0°F.
pH55 has a stability indicator and hold function that freezes the display for easy and accurate recording. The large display also has graphic symbols to guide you through all operations. Complete with a temperature probe for faster and more precise temperature measurement it compensates automatically for temperature.
Calibration is made automatically in 1 or 2 points with memorized standard and NIST buffer sets. Auto power OFF saves battery power after non-use. The double-junction electrode can be replaced in a very fast and simple way! The modular design allows easy electrode and battery replacement.
