G-SYSTEMS FAN CONTROLLERS

Step Transformer controller is specific in that the fans are not a noise (howling) at low speed.

Step transformers determines the speed of the fan alone using a 6-degrees up / down depending on humidity and temperature. The temperature and hysteresis (sensitivity) can be set on the two buttons, as well as humidity and moisture-hysteresis of the other two buttons. The controller comes assembled in waterproof housing compatible main contact and 4m cable with a light sensor that detects day / night time, which makes it the perfect controller.

Sizes and technical data:

• Packaging: 200x250x180mm
• Controller: 265x300x205mm
• Intended for: 8A (2 fans)
• Volta prim: 230V / 50Hz
• Volta sec. 80V, 110V, 140V, 170V, 200V, 230V AUTOMATIC steps 50HZ
• Digital sensor 5V measures temperatures from -55 ° C to + 125 ° C (-67 ° F to + 257 ° F)
• 0.5 ° C accuracy from -10 ° C to + 85 ° C
• Humidity accuracy ± 4,5% RH
• Class of protection: IP44

Step Transformer controller is specific in that the fans are not a noise (howling) at low speed.

Step transformers determines the speed of the fan alone using a 6-degrees up / down depending on humidity and temperature. The temperature and hysteresis (sensitivity) can be set on the two buttons, as well as humidity and moisture-hysteresis of the other two buttons. The controller comes assembled in waterproof housing compatible main contact and 4m cable with a light sensor that detects day / night time, which makes it the perfect controller.

Sizes and technical data:

• Controller: WxHxD = 265x300x205mm
• Intended for:  8A/1800W
• Volta prim: 230V / 50Hz
• Volta sec. 80V, 110V, 140V, 170V, 200V, 230V AUTOMATIC steps 50HZ
• Digital sensor 5V measures temperatures from -55 ° C to + 125 ° C (-67 ° F to + 257 ° F)
• 0.5 ° C accuracy from -10 ° C to + 85 ° C
• Humidity accuracy ± 4,5% RH
• Protection class IP54

Step Transformer controller is specific in that the fans are not a noise (howling) at low speed.

Step transformers determines the speed of the fan alone using a 6-degrees up / down depending on humidity and temperature. The temperature and hysteresis (sensitivity) can be set on the two buttons, as well as humidity and moisture-hysteresis of the other two buttons.The controller is waterproof housing compatible main contact and 4m cable with a light sensor that detects day / night time, which makes it the perfect controller

Technical data:

• Case: WxHxD = 200x250x180mm
• Kontroller: WxHxD = 265x300x205mm
• Intended for: 2,5A (2 fans)
• Volta prim: 230V / 50Hz
• Volta sec. 80V, 110V, 140V, 170V, 200V, 230V AUTOMATIC steps 50HZ
• Digital sensor 5V measures temperatures from -55 ° C to + 125 ° C (-67 ° F to + 257 ° F)
• Аccuracy from -10 ° C to + 85 ° C
• Humidity accuracy ± 4,5% RH
• Protection class IP54

Humidity and temperature controller for intake and exhaust air fan with additional 2 programmable outputs and LCD display

Hardware:

• 2pcs. Variable outputs for fans
• 2pcs. Programmable outputs for appliances
• 1pcs. Temperature and humidity sensors with light detector (air)
• 1pcs. Temperature Sensor (Waterproof)

The 16A ventilation controller is built from a solid very robust aluminium housing. It can control up to 2200W power per outlet. In addition to a conventional temperature and humidity variable control the 16A controller carries 2pcs individual programmable outlet sockets. These can be assigned to one of the two sensors or be controlled by a timer function. Particularly attractive is the huge number of parameters that can be set for day/night individually to fulfill all desired requirements. The controller carries two transistor outputs for fans (phase control) and parallel working internally two 0-10V outputs.

Depending on the version, the controller is equipped with a USB port for data logging. All relevant measurement data and control signals get written on a CSV file to the USB stick, later they can get evaluated in an Excel application. The 16A controller has a free slot for a pressure sensor to control the intake air fan depending on the pressure difference.

The device has a protection fuse of 16A, which is considered as maximum allowable load for the entire controller. Each single output can carry max. 2200W per socket and all outputs together have a max. load of 3600W/16A. The device comes with a 2m connection cable to connect to a conventional household outlet of 230V/16A. The sensors are supplied with a 4m long cable which can be expanded up to 10m. A digital display and four navigation keys provide easy navigation in the Menuand 6LED lights are indicating the current switching status.

Among other things, settings such as display functions, memory frequency and languages, English, German, French, Spanish and Italian, can be selected.

Sizes and technical data:

• Case: WxHxD = 120x180x80mm
• Controller: WxHxD = 150x210x110mm
• Voltage: 230V / 50Hz / I max: 16A / 3600W
• Humidity and temperature sensor: 5V, measures temperatures from -55°C to + 125°C (-67°F to 257°F) Accuracy 0.5°C from -10°C to + 85°C Humidity Accuracy ± 4.5% rh
• Temperature sensor: 5V, measures temperatures from -55°C to + 125°C (-67°F to + 257°F)
• Accuracy 0.5°C from -10°C to + 85°C
• Protection class: IP54

AC-EC LCD fan controller for 2fans 2x5A

This AC-EC fan controller with LCD display, a rotary push knob allows a very fast setting of all the values and reading of all the information's given by the fan such as actual set speed, temperature, humidity day/night, negative pressure of the intake fan and RPM (rounds per minute) of the EC-exhaust fan. A built in light sensor in the probe recognise day/night modes. Two 5A/230V AC exits for intake and exhaust fan, in parallel you have 2xRJ45 connector and you can choose between 0-10V or PWM (pulse wide modulation) signal.

2 internal temperature sensors prevent from overheating on the heat sink and processor side. The AC-EC fan controller comes with power cable 1.5m, 4m sensor cable. It is ready to use. You can program 15 individual settings with rotary push button.

Features:

-Temperature day
-Temperature hysteresis day
-Humidity day
-Humidity hysteresis day
-Minimum speed day
-Maximum speed day
-Temperature night
-Temperature hysteresis night
-Humidity night
-Humidity hysteresis night
-Minimum speed night
-Maximum speed night
-Negative pressure setting
-Switch sensor level
-Switch over time day/night

LCD display:

-Graphic and digital display of speed rpm constant
-Temperature display constant
-Humidity display constant
-Set point selectable not constant, over input keys

This digital fan controller is a humidity and temperature dependent speed controller for rooms with intake and exhaust fans (2 x 600watt).

The fan controller keeps the room humidity and temperature constant and under pressure to prevent odour from escaping.

Settings range:

• Temperature: 20C° - 30C°
• Humidity: 30% - 100%
• Minimum speed: off, 20% - 100%
• Negative pressure: 100% - 50%

This digital fan controller is a temperature dependent speed controller for rooms with intake and exhaust fans.

The fan controller keeps the room temperature constant and under pressure to prevent odour from escaping. The digital fan controller is a temperature dependent speed controller for rooms with air flow in and out. The fan controller keeps the room temperature constant and under pressure to prevent odour from escaping. This fan controller can by used also as only air out regulator on two fans if there is a nature way of air in.

Sizes and technical data's:

• Case: WxHxD = 130x80x70mm
• Controller: WxHxD = 160x100x100mm
• Designed for: 2x5A / 2x1150W (2300W) / TRIAC 2x16A
• Volts: 230V / 50HZ
• Digital sensor 5V Measures temperatures from –55°C to +125°C (–67°F to +257°F)
• 0.5°C accuracy from –10°C to +85°C
• Protection class IP54

This digital temperature, minimum-, maximum- speed controller with hysteresis setting is a temperature depended speed controller for ventilated rooms with one or more exhaust fans (up to 600 watt).

The controller keeps the temperature constantly and impedes to run under the set minimum-speed, as well to run over the set maximum speed. The hysteresis defines the temperature range. It can be easily controlled, adjusting the required temperature minimum-, maximum speed and hysteresis on four knobs.

Sizes and technical data's:

• Case: WxHxD = 130x80x70mm
• Controller: WxHxD = 160x100x90mm
• Designed for: 10A 2300W
• Volts: 230V / 50HZ
• Digital sensor 5V Measures temperatures from –55°C to +125°C (–67°F to +257°F)
• 0.5°C accuracy from –10°C to +85°C
• Protection class: IP54

EC LCD controller for 2fans

This EC fan controller with LCD display, keyboard and power led allows a very easy setting and reading of all the information's given by the fan such as actual set speed, temperature, humidity day/night, negative pressure of the intake fan and rounds per minute of the exhaust fan. A built in light sensor in the probe recognize day/night modes. The EC fan controller comes with power adaptor 1m cable, a 4m sensor cable and 2x 4m fan cable including all connectors 4pole 3.5mm jack. It ready to use.

You can program 15 individual settings with only three buttons

Features:
-Temperature day
-Temperature hysteresis day
-Humidity day
-Humidity hysteresis day
-Minimum speed day
-Maximum speed day
-Temperature night
-Temperature hysteresis night
-Humidity night
-Humidity hysteresis night
-Minimum speed night
-Maximum speed night
-Negative pressure setting
-Switch sensor level
-Switch over time day/night

LCD display:
-Graphic and digital display of speed rpm constant
-Temperature display constant
-Humidity display constant
-Set point selectable not constant, over input keys

THE PERFECT GSE SYSTEM FOR HYDROPONICS INDOOR GROWING

The Gse Water Timer is used to control irrigation systems and water pumps in hydroponics systems. The timer with an off function schedules the irrigation adn can be set separately for day and night irrigation.

The unit for indoor growing comes complete in a waterproof housing with hinged lids, compatible mains sockets and a built in light sensor with 4m low voltage cable which detects day/night-time; making it the perfect controller for humid rooms.

WATER TIMER GSE: SIZES AND TECHNICAL DATA

• Housing: WxHxD = 130x80x70mm
• Irrigation timer: WxHxD = 145x100x90mm
• Designed for: 2300W 10A (ind. 3A)
• Voltage: 230V / 50Hz
• Protection class: IP54

This digital temperature, minimum-, maximum- speed controller with hysteresis setting is a temperature depended speed controller for ventilated rooms with one or more exhaust fans.

The controller keeps the temperature constantly and impedes to run under the set minimum-speed, as well to run over the set maximum speed. The hysteresis defines the temperature range. It can be easily controlled, adjusting the required temperature minimum-, maximum speed and hysteresis on four knobs.

Sizes and technical data's:

• Case: WxHxD = 130x80x70mm
• Controller: WxHxD = 160x100x90mm
• Designed for: 1A / 200W / TRIAC 1x16A
• Volts: 230V / 50HZ
• Digital sensor 5V Measures temperatures from –55°C to +125°C (–67°F to +257°F)
• 0.5°C accuracy from –10°C to +85°C
• Protection class: IP54

Humidity control could make the difference between a crop’s success and its failure.

This accurate plug and play controller for either a humidifier or dehumidifier makes controlling this environmental condition easy.

The unit comes complete in a waterproof casing, IP 44 rated, with a compatible mains socket with hinged lids, and a digital low voltage sensor, making it the perfect controller for humid rooms. Simply plug the unit in between the power supply and the humidifier or dehumidifier, set the desired humidity range, and let the controller take control.

The sensor is supplied with a 4-meter cable.

Sizes and technical data:

• Housing: WxHxD = 130x80x70mm
• Humidity Controller:
• WxHxD = 160x100x90mm
• Power requirements: (Mains) Voltage: 230V/50Hz, 8Amp (3A inductive)
• Digital Sensor: 5V Measures temperatures from -55 ° C to +125 ° C
• (-67 ° F to +257 ° F) 0.5 ° C accuracy from -10 ° c to +85 ° C
• Humidity accuracy ± 4.5% RH
• Protection class: IP54

This digital fan controller is a temperature dependent speed controller for rooms with intake and exhaust fans.

The fan controller keeps the room temperature constant and at a certain minimum speed. The digital fan controller is a temperature dependent speed controller for rooms with air flow in and out. The fan controller keeps the room temperature constant and under pressure to prevent odour from escaping. This fan controller can by used also as only air out regulator on two fans if there is a nature way of air in.

Sizes and technical data's:

• Case: WxHxD = 130x80x70mm
• Controller: WxHxD = 160x100x90mm
• Designed for: 10A / 2300W / TRIAC 1x16A
• Volts: 230V / 50HZ
• Digital sensor 5V Measures temperatures from –55°C to +125°C (–67°F to +257°F)
• 0.5°C accuracy from –10°C to +85°C
• Protection class: IP54

Boxing relay switches two independent circuits - stopped them and release them.

It is operated by a third power cord that must be plugged into a timer switch or GSE timer box. Each of electricity networks can withstand 4x600W (total svetlinie 8x600W).

Sizes and technical data's:

• Case: WxHxD = 180x130x60mm
• Timer box: WxHxD = 160x100x90mm
• Volt: 2x230V / 50Hz
• Relays: 4x16A 230V
• Protection class: IP54

This EC fan controller have temperature, humidity and minimum speed setting on three knobs.

It is easy to use. The EC fan controller get supplied with a 4m long cable with a 3.5mm 4pole stereo jack connector to the fan and a 4m long Temperature senor.  It comes as a finish product together with a power supply. The eutput signal is 0-10V or on demand a PWM (pulse wide modulation) signal. If the EC-fan suppolt PWM signal the controller is able to run without power supply.

Settings range:
Temperature: 20C° to 30C°
Humidity: 30% - 100%
Minimum speed: off, 20% to -100%

This EC fan controller have temperature, minimum- and maximum speed setting on three knobs. It is easy to use.

The EC fan controller get supplied with a 4m long cable including a 3.5mm 4pole stereo jack connector to the fan and a 4m long Temperature senor.  It comes as a finish product together with a power supply. The eutput signal is 0-10V or on demand a PWM (pulse wide modulation) signal. If the EC-fan support a PWM signal the controller is able to run without power supply.

Settings range:

• Temperature: 20C° to 30C°
• Minimum speed: off, 20% to -100%
• Maximum speed: 100% to -50%