G-SYSTEMS TIMER BOX FOR LIGHTING

The timer box is used to switch several inductive loads such as high pressure steam lamps with high inrush current to turn ON and OFF simultaneously.

The timer box is used to switch several inductive loads such as high pressure steam lamps with high inrush current to turn ON and OFF simultaneously. The Timer Box IV has a digital display that is based on a 24-hour mechanical clock . With a left-right control button, it's an easy way to set the clock even faster than a mechanical timer. 48 segments show the current time, programmed duration, day counter and room temperature.
 

In the event of a power outage, the internal battery will save all your settings and the current time. (Battery life 10 years )

The timer box is ready for use. This reliable switch box comes complete with a sealed IP54 cover (the protection class offers protection against water splashes from all sides), capped plugs and a low voltage temperature sensor, making it ideal for wet rooms.

TIMER BOX II DELAYS THE LIGHTING AND HEATING (3 PHASE)

 

The GSE Control Unit (Timer Box III) is a professional indoor growing timer & contactor system for turning on 6 x 600w lights.

 

 

ABOUT THIS CONTROL UNIT FOR INDOOR CULTIVATION

The timer box is used by several inductive loads such as high-pressure lamps with high switch on and off simultaneously. This turns on Contactor/Relay 4x600W loads.Model with heating socket is on when lights are off (power management)

YOU CAN MANAGE UP TO 8 GROW LIGHTS AT THE SAME TIME (3PHASE)

 

SIZES AND TECHNICAL DATA:

 

• Size: 500x160x115mm
• Voltage: AC 230V / 400V 50-60 Hz
• Power: 7200W (32A)
• Heating: up to 2400w (resistive loads)
• Mechanical timer: 24h automatically / manually
• Setting interval: 15 minutes
• Mechanical endurance of relays: 10,000,000 cycles
• Protection class: IP54

CONTROL ALL OF YOUR LIGHTS WITH ONE CONTROL UNIT WITH ADDED HEATING CONTROL (3PHASE)

 

 

The Advanced GSE Control Unit is a professional indoor growing timer & contactor system for turning on 4 x 600w lights.

 

 

ABOUT THIS CONTROL UNIT FOR INDOOR CULTIVATION

• This system is  will turn on 4 x 600w lights in groups of 2 with a 25 second delay between each group. 
• The benefit of this is that you do not have a large start up power surge by turning all the lights on at once. 
• This model includes a heating socket which turns on when lights are off (power management).

TIMER BOX II DELAYS THE LIGHTING AND HEATING

 

 

 

The GSE Control Unit (Timer Box II) is a professional indoor growing timer & contactor system for turning on 6 x 600w lights.

 

 

ABOUT THIS CONTROL UNIT FOR INDOOR CULTIVATION

 

The timer box is used by several inductive loads such as high-pressure lamps with high switch on and off simultaneously. This turns on Contactor/Relay 4x600W loads.Model with heating socket is on when lights are off (power management)

TIMER BOX II DELAYS THE LIGHTING AND HEATING

 

 

The GSE Control Unit (Timer Box II) is a professional indoor growing timer & contactor system for turning on 6 x 600w lights.

 

 

 

 

ABOUT THIS CONTROL UNIT FOR INDOOR CULTIVATION

 

 

The timer box is used by several inductive loads such as high-pressure lamps with high switch on and off simultaneously. This turns on Contactor/Relay 4x600W loads.Model with heating socket is on when lights are off (power management)

YOU CAN MANAGE UP TO 8 GROW LIGHTS AT THE SAME TIME

 

 

This relay box for indoor growing switches two indipendent power circuits on and off. It's controlled by a third power cord which needs to be plugged to a commercial timer or a GSE timer box.

Each power circuit can handle 4x600W (total 8x600W lights).

 

SIZES AND TECHNICAL DATA:

 

• Case = 180x130x60mm
• Timer box: WxHxD = 160x100x90mm
• Volt: 2x230V / 50Hz
• Relays: 4x16A 230V
• Protection class: IP44

YOU CAN MANAGE UP TO 8 GROW LIGHTS AT THE SAME TIME

 

 

This relay box for indoor growing switches two indipendent power circuits on and off. It's controlled by a third power cord which needs to be plugged to a commercial timer or a GSE timer box.

Each power circuit can handle 4x600W 

 

 

SIZES AND TECHNICAL DATA:

• Case: WxHxD = 180X130X60MM
• Timer box: WxHxD = 160x100x90mm
• Volt: 2x230V / 50Hz
• Relays: 4x16A 230V
• Protection class: IP44

 

A CONTROL UNIT FOR INDOOR GROWING CAN MANAGE UP TO 6X600W LAMPS

 

 

The Advanced GSE Control Unit for grow box manage the indoor lighting of plants, is a professional timer & contactor system for turning on 6 x 600w lights.

 

 

FEATURES OF THIS CONTROL UNIT FOR GROW ROOM:

• This system will turn on 6 x 600w lights in groups of 2 with a 25 second delay between each group. 
• The benefit of this is that you do not have a large start up power surge by turning all the lights on at once. 
• This model includes a heating socket which turns on when lights are off (power management)

A CONTROL UNIT FOR INDOOR GROWING CAN MANAGE UP TO 6X600W LAMPS

 

The Advanced GSE Control Unit for grow box manage the indoor lighting of plants, is a professional timer & contactor system for turning on 6 x 600w lights.

 

FEATURES OF THIS CONTROL UNIT FOR GROW ROOM

• This system will turn on 6 x 600w lights in groups of 2 with a 25 second delay between each group. 
• The benefit of this is that you do not have a large start up power surge by turning all the lights on at once. 
• This model includes a heating socket which turns on when lights are off (power management).

CONTROL ALL OF YOUR LIGHTS WITH ONE CONTROL UNIT WITH ADDED HEATING CONTROL

 

The Advanced GSE Control Unit is a professional indoor growing timer & contactor system for turning on 4 x 600w lights.

 

ABOUT THIS CONTROL UNIT FOR INDOOR CULTIVATION

• This system is  will turn on 4 x 600w lights in groups of 2 with a 25 second delay between each group. 
• The benefit of this is that you do not have a large start up power surge by turning all the lights on at once. 
• This model includes a heating socket which turns on when lights are off (power management).

The Advanced Control Unit is a professional timer & contactor system for turning on 4 x 600w lights.

 

• This system will turn on 4 x 600w lights in groups of 2 with a 25 second delay between each group. 
• The benefit of this is that you do not have a large start up power surge by turning all the lights on at once. 
• This is relevant as a light typically requires about 20% extra ampage to 'start up' as opposed to when they are up and running.