Ventilation and Climate

CKV - 3 mm

Replaceable active carbon for your anti-odor filter. Do not let those undesirable odors escape from your closet or growing area.

If your filter does not make these odors disappear as before. The time has come to change the active carbon inside it. Too easy.

Your filter will continue to work like new

OptiClimate water-cooled air conditioner is a new solution for the indoor climate control.

OptiClimate can be uses for circulation, cooling, heating, dehumidifying and filtering. There is more than five years of development and testing in OptiClimate. This has resulted in a fully developed and optimized product that allows to regulate the climate in to perfection, with the lowest possible power consumption.

OptiClimate cools the air using water as a cooling medium and heats through ceramic heating elements. Because water is a much better cooling fluid than air there is relatively little of needed. OptiClimate has a water inlet and outlet. The input is connected to the water supply. The drainage is connected to the sewer with a possible branch to a water or nutrient. The cold water is used to cool the air with the result that it is heated to 40-50 ° C.

This warm water is discharged into the sewers or can be used for other purposes, such as heating in your room.
The included remote is also a controller that all processes are fully automated and run to follow. After the remote once to set the minimum temperature (night), maximum (day) and the times will OptiClimate depending on the night or daytime heating or cooling. The pre-set temperatures are not exceeded.

During daytime operation (cooling) OptiClimate dehumidify the air. Should it be desired OptiClimate can also dehumidify the night conditions so that the humidity is optimal.

There is a OptiClimate of 3,5KW, 6KW, or 10KW 15KW cooling capacity. More OptiClimates in a room can be installed depending on the need for cooling. The stated capacity is maximum, but can be used at all times for less cooling.
Through the use of oversized heat exchangers and the water as a cooling medium, a very high efficiency and hence low current consumption is achieved.

On a 22мм cupper pipe, in total 45 to 60KW of cooling power can be connected. On a 16мм copper pipe, it is possible to connect up to 25KW cooling capacity.Because the Opticlimate is placed in a (semi) closed system, it is very easy to add CO2 without much waste, to the cultivation area, wherein the air is continuously recirculated. Since there will only be a limited export of air, no major CO2 equipment is needed and models up to 4KW are more then sufficient.

The Opticlimate PRO 3 Series is a unique solution to arrange perfection. Through the cooling and heating function, it is possible 365
days per year to achieve a stable climate in which you are never dependent on the outdoor climate.
It is possible, by means of a circuit board with advanced software to adjust various settings, so it is now possible for spaces slowly to warm up and cool down, even if the assimilation lighting is turned off.
The Opticlimate system works even better when combined with Dimlux lighting and a CO2 addition. By means of corresponding software it's possible to adjust the behavior of CO2 and various control equipment to work together with the Opticlimate, to provide the perfect indoor climate.

OptiClimate water-cooled air conditioner is a new solution for the indoor climate control.

OptiClimate can be uses for circulation, cooling, heating, dehumidifying and filtering. There is more than five years of development and testing in OptiClimate. This has resulted in a fully developed and optimized product that allows to regulate the climate in to perfection, with the lowest possible power consumption.

OptiClimate cools the air using water as a cooling medium and heats through ceramic heating elements. Because water is a much better cooling fluid than air there is relatively little of needed. OptiClimate has a water inlet and outlet. The input is connected to the water supply. The drainage is connected to the sewer with a possible branch to a water or nutrient. The cold water is used to cool the air with the result that it is heated to 40-50 ° C. This warm water is discharged into the sewers or can be used for other purposes, such as heating in your room.
The included remote is also a controller that all processes are fully automated and run to follow. After the remote once to set the minimum temperature (night), maximum (day) and the times will OptiClimate depending on the night or daytime heating or cooling. The pre-set temperatures are not exceeded.

During daytime operation (cooling) OptiClimate dehumidify the air. Should it be desired OptiClimate can also dehumidify the night conditions so that the humidity is optimal.

There is a OptiClimate of 3,5KW, 6KW, or 10KW 15KW cooling capacity. More OptiClimates in a room can be installed depending on the need for cooling. The stated capacity is maximum, but can be used at all times for less cooling.
Through the use of oversized heat exchangers and the water as a cooling medium, a very high efficiency and hence low current consumption is achieved.

On a 22MM cupper pipe, in total 45 to 60KW of cooling power can be connected. On a 16MM copper pipe, it is possible to connect up to 25KW cooling capacity.Because the Opticlimate is placed in a (semi) closed system, it is very easy to add CO2 without much waste, to the cultivation area, wherein the air is continuously recirculated. Since there will only be a limited export of air, no major CO2 equipment is needed and models up to 4KW are more then sufficient.

The Opticlimate PRO 3 Series is a unique solution to arrange perfection. Through the cooling and heating function, it is possible 365
days per year to achieve a stable climate in which you are never dependent on the outdoor climate.
It is possible, by means of a circuit board with advanced software to adjust various settings, so it is now possible for spaces slowly to warm up and cool down, even if the assimilation lighting is turned off.
The Opticlimate system works even better when combined with Dimlux lighting and a CO2 addition. By means of corresponding software it's possible to adjust the behavior of CO2 and various control equipment to work together with the Opticlimate, to provide the perfect indoor climate.

OptiClimate water-cooled air conditioner is a new solution for the indoor climate control.

OptiClimate can be uses for circulation, cooling, heating, dehumidifying and filtering. There is more than five years of development and testing in OptiClimate. This has resulted in a fully developed and optimized product that allows to regulate the climate in to perfection, with the lowest possible power consumption.

OptiClimate cools the air using water as a cooling medium and heats through ceramic heating elements. Because water is a much better cooling fluid than air there is relatively little of needed. OptiClimate has a water inlet and outlet. The input is connected to the water supply. The drainage is connected to the sewer with a possible branch to a water or nutrient. The cold water is used to cool the air with the result that it is heated to 40-50 ° C.

This warm water is discharged into the sewers or can be used for other purposes, such as heating in your room.
The included remote is also a controller that all processes are fully automated and run to follow. After the remote once to set the minimum temperature (night), maximum (day) and the times will OptiClimate depending on the night or daytime heating or cooling. The pre-set temperatures are not exceeded.

During daytime operation (cooling) OptiClimate dehumidify the air. Should it be desired OptiClimate can also dehumidify the night conditions so that the humidity is optimal.

There is a OptiClimate of 3,5KW, 6KW, or 10KW 15KW cooling capacity. More OptiClimates in a room can be installed depending on the need for cooling. The stated capacity is maximum, but can be used at all times for less cooling.
Through the use of oversized heat exchangers and the water as a cooling medium, a very high efficiency and hence low current consumption is achieved.

On a 22мм cupper pipe, in total 45 to 60KW of cooling power can be connected. On a 16мм copper pipe, it is possible to connect up to 25KW cooling capacity.Because the Opticlimate is placed in a (semi) closed system, it is very easy to add CO2 without much waste, to the cultivation area, wherein the air is continuously recirculated. Since there will only be a limited export of air, no major CO2 equipment is needed and models up to 4KW are more then sufficient.

The Opticlimate PRO 3 Series is a unique solution to arrange perfection. Through the cooling and heating function, it is possible 365
days per year to achieve a stable climate in which you are never dependent on the outdoor climate.
It is possible, by means of a circuit board with advanced software to adjust various settings, so it is now possible for spaces slowly to warm up and cool down, even if the assimilation lighting is turned off.
The Opticlimate system works even better when combined with Dimlux lighting and a CO2 addition. By means of corresponding software it's possible to adjust the behavior of CO2 and various control equipment to work together with the Opticlimate, to provide the perfect indoor climate.

OptiClimate water-cooled air conditioner is a new solution for the indoor climate control.

OptiClimate can be uses for circulation, cooling, heating, dehumidifying and filtering. There is more than five years of development and testing in OptiClimate. This has resulted in a fully developed and optimized product that allows to regulate the climate in to perfection, with the lowest possible power consumption.

OptiClimate cools the air using water as a cooling medium and heats through ceramic heating elements. Because water is a much better cooling fluid than air there is relatively little of needed. OptiClimate has a water inlet and outlet. The input is connected to the water supply. The drainage is connected to the sewer with a possible branch to a water or nutrient. The cold water is used to cool the air with the result that it is heated to 40-50 ° C.

This warm water is discharged into the sewers or can be used for other purposes, such as heating in your room.
The included remote is also a controller that all processes are fully automated and run to follow. After the remote once to set the minimum temperature (night), maximum (day) and the times will OptiClimate depending on the night or daytime heating or cooling. The pre-set temperatures are not exceeded.

During daytime operation (cooling) OptiClimate dehumidify the air. Should it be desired OptiClimate can also dehumidify the night conditions so that the humidity is optimal.

There is a OptiClimate of 3,5KW, 6KW, or 10KW 15KW cooling capacity. More OptiClimates in a room can be installed depending on the need for cooling. The stated capacity is maximum, but can be used at all times for less cooling.
Through the use of oversized heat exchangers and the water as a cooling medium, a very high efficiency and hence low current consumption is achieved.

On a 22мм cupper pipe, in total 45 to 60KW of cooling power can be connected. On a 16мм copper pipe, it is possible to connect up to 25KW cooling capacity.Because the Opticlimate is placed in a (semi) closed system, it is very easy to add CO2 without much waste, to the cultivation area, wherein the air is continuously recirculated. Since there will only be a limited export of air, no major CO2 equipment is needed and models up to 4KW are more then sufficient.

The Opticlimate PRO 3 Series is a unique solution to arrange perfection. Through the cooling and heating function, it is possible 365
days per year to achieve a stable climate in which you are never dependent on the outdoor climate.
It is possible, by means of a circuit board with advanced software to adjust various settings, so it is now possible for spaces slowly to warm up and cool down, even if the assimilation lighting is turned off.
The Opticlimate system works even better when combined with Dimlux lighting and a CO2 addition. By means of corresponding software it's possible to adjust the behavior of CO2 and various control equipment to work together with the Opticlimate, to provide the perfect indoor climate.

Cyclone fan 20cm - high performance

Cyclone floor ventilator 20 cm in diameter is compact and powerful, designed to mix air inside the room and prevent the creation of airbags, designed for greenhouses and growboxes. The fan has 3 speeds from low to high which you can choose depending on the heat. 

Good ventilation in your indoor environment reduces temperature and helps plants to grow stronger, prevent the proliferation of pests and fungi, and also enhance the assimilation of CO2.

• Flow rate up to 14.10 m3 / min.
• 35W fan.
• 220 / 240W, 50Hz power supply
• Maximum air speed up to 3.97 meters / second.
• Quiet, maximum 61 dB
• Powerful and quiet motor with three different speeds

High-end fan!

 The 30 cm diameter floor fan is compact and powerful, designed to mix air in the room and prevent the formation of airbags. Designed for greenhouses and tents for growing. This fan has 3 speeds from low to high, which you can choose depending on the heat in the room.

Dimensions 30x27x13 cm.

Good ventilation in your room lowers the temperature and helps plants grow stronger. Prevents the spread of pests and fungi, and improves CO2 absorption.

• Flow rate up to 850 m3 / h.
• 40W fan.
• 220 / 240V, 50Hz power supply
• Maximum air speed up to 3.97 meters / second.
• Silent, maximum 61 dB
• Dimensions: 30x27x12 cm
• Powerful and quiet engine with three different speeds

Circulating fan, diameter: 30 cm

With its low noise and power, the Vanguard Box Fan is ideal for extra air circulation in your plant room. It has 3 speeds and a 120 minute timer.

Specifications:

• Power: 45W
• 3 speeds
• Diameter: 30cm

Circulating fan with stand

Cyclone is a high performance circulating fan. Durable, powerful, features 3 speeds

Specifications:

• High speed performance
• 3 speeds
• Silent
• Remote control
• Fixed and rolling (oscillating) mode
• Angle adjustment option for fully directed airflow

Wall circulation fan

Cyclone is a high-performance, circulating fan. Durable, powerful, features 3 speeds.

Specifications:

• High speed performance
• 3 speeds
• Silent
• Fixed and rolling (oscillating) mode
• Angle adjustment option for fully directed airflow

Wall circulation fan with remote control

Cyclone is a high-performance, circulating fan. Durable, powerful, with remote control and 3 speeds.

Specifications:

• High speed performance
• 3 speeds
• Silent
• Remote control
• Fixed and rolling (oscillating) mode
• Angle adjustment option for fully directed airflow

Cyclone fan 30cm - high performance

Cyclone floor ventilator 30 cm in diameter is compact and powerful, designed to mix air inside the room and prevent the creation of airbags, designed for greenhouses and growboxes. The fan has 3 speeds from low to high which you can choose depending on the heat.

Good ventilation in your indoor environment reduces temperature and helps plants to grow stronger, prevent the proliferation of pests and fungi, and also enhance the assimilation of CO2.

• Flow rate up to 16.31 m3 / min.
• Fan with a power of 45 W.
• Power supply 220 / 240W, 50Hz
• Maximum air speed up to 3.27 meters / second.
• Quiet, maximum 57.20 dB
• Powerful and quiet engine with three different speeds

Cyclone fan 40cm - high performance

Cyclone floor ventilator 40 cm in diameter is compact and powerful, designed to mix air inside the room and prevent the creation of airbags, designed for greenhouses and growboxes. The fan has 3 speeds from low to high which you can choose depending on the heat. 

Good ventilation in your indoor environment reduces temperature and helps plants to grow stronger, prevent the proliferation of pests and fungi, and also enhance the assimilation of CO2.

• Flow rate up to 30.07m3 / min.
• Power supply 220 / 240W, 50Hz
• Maximum air speed up to 3.96 meters / second.
• Quiet, maximum 62.7 dB
• Powerful and quiet engine with three different speeds

Air movement is very important in your grow room as it strengthens up your plants and circulates the air around, creating more even temperatures throughout.

Features:

• 100° Tilt Adjustable head
• 100W
• Quiet operation
• Maximum air movement from premium motor
• Finger safe mesh grill
• Easy to use, no assembly required

The Ralight wall fan 45T-W 18 inch (45 cm)

The wall fans are ideal for rooms where used every inch of space. By attaching a fan on the wall prevents the air flow is blocked by any objects placed on the ground. By the simple suspension system, the Wall Fans easy to attach to the wall or ceiling .

- Easy to mount on the wall
- Pivoting
- Manually set vertically.
- Speed adjustable in 3 steps
- Modern design
- Professional quality

• Turns in 3 settings
• The Ralight wall fan has a maximum capacity of 18.000 m3 p/h
• This fan can also be assembled upside down 

The Ralight fan on a stand 45T-S 18 inch (45 cm)

The stand fan is the most used fan. You simply move the fan to where you need it most. Because the stand fan is equipped with an adjustable leg, you can adjust the fan to the desired height.

• Equipped with a sturdy and height-adjustable leg
• Swivelable
• Speed adjustable in 3 positions
• Modern design
• Professional quality

Specifications:

• Model 45T-S
• Frequency 50Hz
• Air Delivery 115sqm
• Voltage 230V
• Power 75W

The Ralight wall fan 50T-W 20 inch (50 cm)

The wall fans are ideal for rooms where used every inch of space. By attaching a fan on the wall prevents the air flow is blocked by any objects placed on the ground. By the simple suspension system, the Wall Fans easy to attach to the wall or ceiling .

- Easy to mount on the wall
- Pivoting
- Manually set vertically.
- Speed adjustable in 3 steps
- Modern design
- Professional quality

• Turns in 3 settings
• The Ralight wall fan has a maximum capacity of 192m2
• This fan can also be assembled upside down 

The Ralight fan on a stand 50T-S 20 inch (50 cm)

The stand fan is the most used fan. You simply move the fan to where you need it most. Because the stand fan is equipped with an adjustable leg, you can adjust the fan to the desired height.

• Equipped with a sturdy and height-adjustable leg
• Swivelable
• Speed adjustable in 3 positions
• Modern design
• Professional quality

Specifications:

• Model 50T-S
• Frequency 50Hz
• Air Delivery 190sqm
• Voltage 230V
• Power 110W