Ventilation and Climate

T-Micro CO2 Controller 

The T-Micro CO2 Controller is the smallest CO2 controller from the TechGrow range. This device is by far the best in its category, due to the complete digital technique.

You can use the T-Micro CO2 Controller in any room. It automatically turns the CO2 source on and off. The external CO2 sensor with light sensor enables automatic switching between day and night settings.

The T-Micro CO2 Controller is adjustable from 300 to 2000 ppm and performs a measurement every second. Its display shows actual values, including setpoint and hysteresis, and the indicator LED indicates whether CO2 is being dosed or not. Moreover, the T-Micro CO2 Controller has a built-in calibration function, so you can calibrate the CO2 sensor in fresh air.

This CO2 controller comes without a sensor.

Features:

- Plug & Play.

- Can be used in small to very large spaces.

- Built-in calibration function to calibrate the CO2 sensor in fresh air.

- Adjustable from 300 - 2000 ppm.

- Min/Max display for CO2.

- Indicator led indicates when CO2 is dosed.

- Switches the CO2 source (CO2 generator, CO2 cylinder) ON/OFF by means of a 230V relay.

- Memory for setpoint and hysteresis in case of power failure.

- Automatic 110V/230V detection.

- The external sensor has a light sensor that automatically switches between day and night settings.

- Automatic detection of cable failure or poor connection with the sensor(s).

- Sensor connection with standard network cable (UTP). Included is a cable of 5 meters.

- Controller and sensor are available separately.

- Various sensors are available separately.

- Possibility to connect the TechGrow Datalogger (DL-1).

This sensor measures CO2 and detects light. The S-2 is compatible with all TechGrow controllers.

SThe S-2 is compatible with all TechGrow controllers. The sensor is equipped with a built-in calibration function so you can calibrate the CO2 sensor against outdoor air. The calibration menu is only accesible through a CO2 controller. Also equipped with a built-in switch to prevent unwanted calibration. Available in : 0 – 2.000 ppm or 0 – 10.000 ppm.

Also equipped with a built-in switch to prevent unwanted calibration. All of the TechGrow controllers and sensors (except for the Temp probe) are connectable to each other to guarantee an optimal user experience. It is possible to connect all controllers with each other, so that you can control your entire climate with the use of an TechGrow S-4 sensor Since each device has 3 UTP connectors it is not only possible to connect all controllers, but also to connect for example, a Data logger DL-1 or an AM-T sms Detector.

The sensor can be plugged into any UTP connector. The regular TechGrow sensors are the same as the sensors from the TechGrow Pro Series and can therefore be used for controllers from the Pro Series.

This sensor measures CO2 and detects light. The S-2 is compatible with all TechGrow controllers.

This all-in-one sensor measures CO2, temperature, humidity and detects light simultaneously. Also, the sensor is equipped with a built-in calibration function to calibrate the CO2 sensor against outdoor air. The calibration menu is only accesible through a CO2 controller. Also equipped with a built-in switch to prevent unwanted calibration. Available in : 0 – 2.000 ppm or 0 – 10.000 ppm.

Also equipped with a built-in switch to prevent unwanted calibration. All of the TechGrow controllers and sensors (except for the Temp probe) are connectable to each other to guarantee an optimal user experience. It is possible to connect all controllers with each other, so that you can control your entire climate with the use of an TechGrow S-2 sensor Since each device has 3 UTP connectors it is not only possible to connect all controllers, but also to connect for example, a Data logger DL-1 or an AM-T sms Detector.

The sensor can be plugged into any UTP connector. The regular TechGrow sensors are the same as the sensors from the TechGrow Pro Series and can therefore be used for controllers from the Pro Series.

This sensor measures CO2 and detects light. The S-4 is compatible with all TechGrow controllers.

This all-in-one sensor measures CO2, temperature, humidity and detects light simultaneously. Also, the sensor is equipped with a built-in calibration function to calibrate the CO2 sensor against outdoor air. The calibration menu is only accesible through a CO2 controller. Also equipped with a built-in switch to prevent unwanted calibration. Available in : 0 – 2.000 ppm or 0 – 10.000 ppm.

Also equipped with a built-in switch to prevent unwanted calibration. All of the TechGrow controllers and sensors (except for the Temp probe) are connectable to each other to guarantee an optimal user experience. It is possible to connect all controllers with each other, so that you can control your entire climate with the use of an TechGrow S-4 sensor Since each device has 3 UTP connectors it is not only possible to connect all controllers, but also to connect for example, a Data logger DL-1 or an AM-T sms Detector.

The sensor can be plugged into any UTP connector. The regular TechGrow sensors are the same as the sensors from the TechGrow Pro Series and can therefore be used for controllers from the Pro Series.

Dimlux Maxi Controller V 1.2 & CO2 Sensor (With 5m cable)

• This money saving deal pairs together the Dimlux Maxi Controller V1.2 and the Dimlux CO2 Sensor (With 5m Cable).
• Money saving deal
• Maxi Controller & CO2 Sensor combo
• Accurately monitors CO2 levels in the grow area
• Also capable of regulating lighting, heaters and humidifiers
• The Dimlux Maxi Controller & CO2 Sensor (With 5m cable)

Contains:

1 x Maxi Controller unit, 1 x power supply with 1.8m cable, 1 x CO2 Sensor (with 5m cable)

How the Dimlux Maxi Controller & CO2 Sensor Work:

• This is a money saving combo deal comprising of the Dimlux Maxi Controller and the Dimlux CO2 Sensor:
• Maxi Controller
• The Dimlux Maxi Controller is probably the most comprehensive piece of growroom equipment we’ve ever come across. As well as regulating the switching of your Dimlux lighting systems (removing the need for a contactor / timer), the Maxi Controller also continuously regulates their output levels to ensure that plant temperatures and VPD (vapour pressure deficit) levels are always perfect. It does this using data gathered by external temperature and humidity probes, as well as the revolutionary infra-red Dimlux Plant Temperature Camera . If this wasn’t enough, the Maxi Controller will even take care of CO2 distribution, as well as switching heaters and humidifiers!
• CO2 Sensor
• The Dimlux CO2 Sensor detects levels of carbon dioxide present in the surrounding atmosphere and feeds the information back to the Dimlux Maxi Controller. The Sensor also powers the (separately available) CO2 Regulator.
• This system ensures that optimal levels are distributed at all times, minimising wastage and maximising plant growth. The CO2 Sensor will even shut down CO2 distribution automatically during lights-off, thanks to it's built-in light cell.
• CO2 supplementation is an absolute must in closed loop environments, where little-to-no fresh air is drawn in from outside. Users of the Opticlimate have been running their climate control systems in conjunction with the Maxi Controller's CO2 distribution system to great effect. The results are, quite simply, staggering!

CO2 Sensor

The Dimlux CO2 Sensor detects levels of carbon dioxide present in the surrounding atmosphere and feeds the information back to the Dimlux Maxi Controller. The Sensor also powers the (separately available) CO2 Regulator. This system ensures that optimal levels are distributed at all times, minimising wastage and maximising plant growth. The CO2 Sensor will even shut down CO2 distribution automatically during lights-off, thanks to it's built-in light cell.

CO2 supplementation is an absolute must in closed loop environments, where little-to-no fresh air is drawn in from outside. Users of the Opticlimate have been running their climate control systems in conjunction with the Maxi Controller's CO2 distribution system to great effect. The results are, quite simply, staggering!

This completely redesigned controller is just as easy to use as the other TechGrow Devices with which it is compatible. The TechGrow T-1 Pro measures and controls the CO2 value in an area. It automatically switches between day and night modes by means of the external sensor.

Our new Pro Series has a solid and robust splash-proof casing and is controlled entirely through its single Push & Turn button. The T-1 Pro controller is also equipped with a min/max memory to display the minimum and the maximum CO2 value in an area. The external CO2 sensor is connected with a default UTP cable, allowing you to perform measurements anywhere in the area, ranging between 300 ppm – 2.000 ppm or between 300 – 10.000 ppm.

With the new built-in dosing-delay and timer it offers the perfect solution for precise and accuracy-dependent dosing. The new T-1 Pro also comes with a built-in dosage counter, which allow you to keep track of your CO2  usage.

The T-1 Pro controller now provides an easier way into long-term progression and overall improvement. Management of your growing environment will be better than ever before!

The T-2 Pro is an unparalleled device that controls the CO2 value, temperature and humidity in your growing area.

Because of this unique combination you can dose your CO2during the day, while letting your fan extract excess CO2and moisture produced by your plants during the night. The T-2 increases ventilation at high temperatures, but this can be overruled by setting the temperature set-point (very) high.

This completely redesigned controller is compatible with many other TechGrow devices. The T-2 Pro measures, controls and displays CO2, humidity and temperature values of connected sensors and it registers min/max values. With easy to operate fan-control by means of the Box-menu.
Including quick menu’s which offer a concise overview of all settings and measurements.

Features:

• All CO2 settings are equal to the T-1 Pro.
• Extraction of excess CO2 and humidity during the night.
• Unique calibration menu for adjusting every box, regardless of the size.
• LED indicator for CO2 dosage, light detection and a stable climate.
• Controls CO2, temperature and humidity simultaneously.
• All settings are saved during power outages.
• Dimmer power available in 7A and 14A versions.
• All set-, hysteresis- and alarm values are separately adjustable.
• Quickmenu for a fast summary of all settings and measurements.
• The fan can be operated automatically or manually.
• Fan and CO2 outlets are fused separately.
• The fan-control is adjustable in steps of 10%.
• Includes an unique feature where the fan can be adjusted in two simple steps.
• Connectable to multiple TechGrow devices.
• DIN-rail mountable.
• Possibility to connect the Techgrow Datalogger (DL-1).
• Possibility to connect the Techgrow SMS module (AM-T).

The T-2 Pro is an unparalleled device that controls the CO2 value, temperature and humidity in your growing area.

Because of this unique combination you can dose your CO2during the day, while letting your fan extract excess CO2and moisture produced by your plants during the night. The T-2 increases ventilation at high temperatures, but this can be overruled by setting the temperature set-point (very) high.

This completely redesigned controller is compatible with many other TechGrow devices. The T-2 Pro measures, controls and displays CO2, humidity and temperature values of connected sensors and it registers min/max values. With easy to operate fan-control by means of the Box-menu. Including quick menu’s which offer a concise overview of all settings and measurements.

Features:

• All CO2 settings are equal to the T-1 Pro.
• Extraction of excess CO2 and humidity during the night.
• Unique calibration menu for adjusting every box, regardless of the size.
• LED indicator for CO2 dosage, light detection and a stable climate.
• Controls CO2, temperature and humidity simultaneously.
• All settings are saved during power outages.
• Dimmer power available in 7A and 14A versions.
• All set-, hysteresis- and alarm values are separately adjustable.
• Quickmenu for a fast summary of all settings and measurements.
• The fan can be operated automatically or manually.
• Fan and CO2 outlets are fused separately.
• The fan-control is adjustable in steps of 10%.
• Includes an unique feature where the fan can be adjusted in two simple steps.
• Connectable to multiple TechGrow devices.
• DIN-rail mountable.
• Possibility to connect the Techgrow Datalogger (DL-1).
• Possibility to connect the Techgrow SMS module (AM-T).

The T-2 Pro is an unparalleled device that controls the CO2 value, temperature and humidity in your growing area.

Because of this unique combination you can dose your CO2during the day, while letting your fan extract excess CO2and moisture produced by your plants during the night. The T-2 increases ventilation at high temperatures, but this can be overruled by setting the temperature set-point (very) high. This completely redesigned controller is compatible with many other TechGrow devices. The T-2 Pro measures, controls and displays CO2, humidity and temperature values of connected sensors and it registers min/max values. With easy to operate fan-control by means of the Box-menu. Including quick menu’s which offer a concise overview of all settings and measurements.

Features:

• All CO2 settings are equal to the T-1 Pro.
• Extraction of excess CO2 and humidity during the night.
• Unique calibration menu for adjusting every box, regardless of the size.
• LED indicator for CO2 dosage, light detection and a stable climate. Controls CO2, temperature and humidity simultaneously. All settings are saved during power outages.
• Dimmer power available in 7A and 14A versions.
• All set-, hysteresis- and alarm values are separately adjustable.
• Quickmenu for a fast summary of all settings and measurements.
• The fan can be operated automatically or manually. Fan and CO2 outlets are fused separately.
• The fan-control is adjustable in steps of 10%. Includes an unique feature where the fan can be adjusted in two simple steps.
• Connectable to multiple TechGrow devices. DIN-rail mountable.
• Possibility to connect the Techgrow Datalogger (DL-1). Possibility to connect the Techgrow SMS module (AM-T).

Iso-Max are a unique series duct fans designed to be effective, powerful and quiet.

The system of the rotor and stator metal housing and special insulation ensure low weight, high performance and low noise levels.

Specifications:

- The flange size: 159mm
- Diameter: 231.6mm
- Length: 600mm
- Weight: 5.5kg
- Power max. 50W
- Noise levels: at the entrance to 60dB, the exit 60B, in housing 49dB
- Swiss motor
- thermal protection

Reducible valve with gauge CO2 bottles

Iso-Max are a unique series duct fans designed to be effective, powerful and quiet.

Y connectors are components for a branch of a ventilation system. Thanks to them you can adapt the separated elements to the room in which growing your plants.

Fresh air is your friend! Each growing room (indoor) must have a well-designed ventilation system. In order for your garden to be successful and for the harvest to be of high quality, you must also consider cleaning, bringing fresh air into the room and ventilation. Here are the most important components needed to build the ideal ventilation system for your needs.

Iso-Max are a unique series duct fans designed to be effective, powerful and quiet.

The system of the rotor and stator metal housing and special insulation ensure low weight, high performance and low noise levels.

This Regulator is connected to your CO2 bottle and wired in to your controller

This complete CO2 regulation system is one of the best on the market; it consists of the Evolution carbon dioxide Regulator. The new Evolution regulator is the most advanced of its kind and has more features and functionality than any other product on the market. Used to dose C02 from a gas bottle. A CO2 controller unit that is user friendly, affordable and reliable. The controller allows for 16 individual settings depending on your room size.

There is no requirement to alter the flow rate of the gas regulator which is factory pre-set to match the controller making set up and use extremely simple To complete the kit we have the Ecotechnics regulator which is manufactured in the UK from top quality components. It has a fixed flow rate of 0.17ltrs per min and is Ecotechnics standard horticultural regulator.

Iso-Max are a unique series duct fans designed to be effective, powerful and quiet.

The system of the rotor and stator metal housing and special insulation ensure low weight, high performance and low noise levels.

Specifications:

- flange size: 249mm

- Diameter: 354mm

- length: 600mm

- max power. 300W

- noise levels: at the entrance to 72dB, the exit 75B, in housing 57dB

- Swiss motorbike

- thermal protection

- possibility of adjusting the speed

- easy installation

Iso-Max are a unique series duct fans designed to be effective, powerful and quiet.

The system of the rotor and stator metal housing and special insulation ensure low weight, high performance and low noise levels.

Specifications:

- flange size: 310mm
- Diameter: 354mm
- length: 700mm
- max power. 300W
- noise levels: at the entrance to 75dB, the exit 75B, in housing 61dB
- Swiss motorbike
- thermal protection
- possibility of adjusting the speed
- easy installation

CO2 Regulator w/ Flow Meter - REG-1 features an accurate, easy to adjust CO2 flow meter that supports from 0.5 to 15 cubic feet per hour, a pre-set regulator that never needs adjusting, and an electronic solenoid valve.

Each CO2 regulator also comes with a tank pressure gauge, an easy to read flow meter, and a 6′ foot power cord. This regulator also works with any 120V device for easy installation. Once the CO2 regulator is installed, simply add the tubing needed to disperse the CO2 evenly throughout your room by attaching the tubing to the back of an oscillating fan for even dispersion. If you are using this without a digital CO2 controller, you will need to use a timer. This regulator is backed by a 3-year full exchange warranty as well. This CO2 Regulator NOT UL Listed and CE Approved. Flow Rate

Includes:

• Range: 0.5 to 15 Square Feet Per Hour
• Tank Pressure Guage
• Pre-Set Regulator
• Easy To Read Square CO2 Flow Meeter
• Electronic Solenoid Valve
• 6-Foot Power Cable
• Tubing Sold Separately

Iso-Max are a unique series duct fans designed to be effective, powerful and quiet.

The system of the rotor and stator metal housing and special insulation ensure low weight, high performance and low noise levels.

The CAN Fan RK 125 L pipe fan 370 m³ / h with 125 mm connection and temperature control, is an Axial duct fan manufactured in Switzerland with a motor in a rugged and maintenance-free plastic housing.

The fan is controllable via both the voltage and the frequency.To protect the motor, this fan also has a thermal protection switch which automatically switches off the engine as soon as it reaches an excessively high operating temperature.

The integrated electronic speed control, a desired room temperature can be adjusted via the dial. If this is exceeded, the fan will automatically increase the speed at below the temperature and slows it.

The engine and propeller pitch allow a high airflow with low noise levels.

The fan is controllable via both the voltage and the frequency.

• To protect the motor, this fan also has a thermal protection switch which automatically switches off the engine as soon as it reaches an excessively high operating temperature.
• The integrated electronic speed control, a desired room temperature can be adjusted via the dial. If this is exceeded, the fan will automatically increase the speed at below the temperature and slows it.
• The engine and propeller pitch allow a high airflow with low noise levels.

CO2 pressure reducing valve with solenoid pro

By means of the pressure reducing valve is easy to dose CO2 gift and inject. This handy little variation is very compact, without compromising quality. This pressure reducer operates optimally when combined with CO2 Controller for Dimlux.

The CAN Fan RK 160 L pipe fan 810 m³ / h with 160 mm connection and temperature control, is an Axial duct fan manufactured in Switzerland with a motor in a rugged and maintenance-free plastic housing.

The fan is controllable via both the voltage and the frequency.To protect the motor, this fan also has a thermal protection switch which automatically switches off the engine as soon as it reaches an excessively high operating temperature.

The integrated electronic speed control, a desired room temperature can be adjusted via the dial. If this is exceeded, the fan will automatically increase the speed at below the temperature and slows it.

The engine and propeller pitch allow a high airflow with low noise levels.

Can-Fan RK is a plastic tube fan that is speed controllable with a thermal switch to protect the fan's motor and it also delivers a strong air flow with less noise.

• One of Europe's biggest selling fans
• Extractor is speed controllable using voltage or frequency control
• Please note: these fans are not supplied with a plug and must be fitted by a qualified electrician
• The Swiss-made motor, together with the propeller design enables this type of fan to deliver a strong airflow while making less noise
• Equipped with a thermal switch that turns off the motor if it reaches a dangerous working temperature

Co2 regulator + magnetic valve

- Used for dosing of CO2 gas bottle.
- Convenient user accessible and reliable.
- There is no requirement to change the flow rate of the gas regulator
- The use of CO2 helps to increase yields by up to 40%

Can-Fan RK is a plastic tube fan that is speed controllable with a thermal switch to protect the fan's motor and it also delivers a strong air flow with less noise.

• One of Europe's biggest selling fans
• Extractor is speed controllable using voltage or frequency control
• Please note: these fans are not supplied with a plug and must be fitted by a qualified electrician
• The Swiss-made motor, together with the propeller design enables this type of fan to deliver a strong airflow while making less noise
• Equipped with a thermal switch that turns off the motor if it reaches a dangerous working temperature

Co2 regulator + magnetic valve

- Used for dosing of CO2 gas bottle.
- Convenient user accessible and reliable.
- There is no requirement to change the flow rate of the gas regulator
- The use of CO2 helps to increase yields by up to 40%

Magnetic valve for CO2

Technical data:

- AC220V 50Hz 1.3 VA

- AC220V 60Hz 1.2 VA

- Amp 17mA

- temp rise 35 C

- 100% EP

- IP65

Designed to cool both individual electrical components and finished devices with increased heat generation.

All fans have a normalized noise level. A wide range of supply voltages allows the SUNON fans to stand up in any design without using additional power supplies.

Brief technical characteristics:

• RoHS: Yes
• Voltage: AC 230 VAC
• Airflow: 161,41 m3 / h
• Noise: 44 dB
• Bearing type Sleeve
• Power: 22 W
• Static pressure: 8.38 mm H2O
• dimensions 120mmx38mm
• Current mA: 140 mA
• Speed: 2700 RPM
• Type: Axial

COMPLETE DATA SHEET

The new Max Fan Pro Series-the second generation of Max Fan, is a diagonal fan using the 3D rotor-stator system, which has been improved to be more efficient and more silent.

The design of the fan makes it very compact and easy to use, as the ventilation duct adapter is integrated into the mounting brackets. You just have to mount the adapter first and then fasten the fan with two screws. Due to the 2 steps speed switch, the Max Fan Pro Series is the most inexpensive version to regulate air performance manually.

• Two power levels for optimum performance.
• Silently rotating rotor housed in a sturdy and elegant plastic housing.
• Compact, easy to install, operate and clean.
• 46w
• 220-230V
• 0.3A
• F 150
• first speed: 470m3
• second speed: 600m3

Dozer machine.

Works with CO2 tablets/Put the CO2 tablets in the slot and set the machine's interval of dropping a tablet into the reservoir.

The new Max Fan Pro Series-the second generation of Max Fan, is a diagonal fan using the 3D rotor-stator system, which has been improved to be more efficient and more silent.

The design of the fan makes it very compact and easy to use, as the ventilation duct adapter is integrated into the mounting brackets. You just have to mount the adapter first and then fasten the fan with two screws. Due to the 2 steps speed switch, the Max Fan Pro Series is the most inexpensive version to regulate air performance manually.

• Top quality fan.
• Two power levels for optimum performance.
• Silently rotating rotor housed in a sturdy and elegant plastic housing.
• Compact, easy to install, operate and clean.
• 45w
• 220-230V
• 1st speed: 496 m3 / h
• 2nd speed: 615 m3 / h
• 0.3A
• F 160

Are you looking for great yields then this is a no brainer.

AIrbomz brings you the latest innovative technology in plant growth (hydroponics) for expolsive indoor growing. Say goodbye to complicated expensive tanks and regulators.

Airbomz produces no heat and is battery-powered which can increase your yield up to 50%.  It allows higher growing temperatures and humidity, shortens the crop cycle and deters most pests.

Airbomz is designed for small to medium grow tents, by omitting measured amounts of CO2 at set intervals the ambient CO2 levels in your grow space will be raised to an ideal 1200 ppm which is perfect for explosive plant growth.

Place the device anywhere in the tent [standing up or laying down] and choose the remote settings..one spray every 60 minutes “daylight time”..this will then raise the ppm of co2 to the desired 1200ppm..sit backand watch the garden go BOOM

Kit includes, Spray, Main Unit and Remote Control.

It does require 2 batteries to operate (not included)

It has a compact design making it easy to mount and clean.

Perfect for your indoor growroom This powerful inline fan generates fresh air, to help compensate for the hot air being generated from the grow lights inside your growroom.

The Max Fan has a 2 speed switch integrated

• Fan of the highest quality.
• Two power levels for optimum performance.
• A silent 3D rotating 3D rotor, located in a rugged and elegant plastic case.
• Compact, easy to install, operate and clean.
• Long life of the appliance
• 117w
• 220-230V
• 0.6A
• Ф 200
• First gear: 793m3
• Second gear: 1218m3

It has a compact design making it easy to mount and clean.

Perfect for your indoor growroom This powerful inline fan generates fresh air, to help compensate for the hot air being generated from the grow lights inside your growroom.

The Max Fan has a 2 speed switch integrated

• Fan of the highest quality.
• Two power levels for optimum performance.
• A silent 3D rotating 3D rotor, located in a rugged and elegant plastic case.
• Compact, easy to install, operate and clean.
• Long life of the appliance
• 170w
• 220-230V
• 0.8A
• Ф 250
• First gear: 1470m3
• Second gear: 1660m3