Ventilation and Climate
Fresh air is your friend!
Any room for growing (indoor) must have a well-made ventilation system. In order to be successful with harvesting in your garden, you should also be considered about the cleanliness, the introduction of fresh air into the room and ventilation.
Here are the most important components needed to build the ideal for your needs, ventilation system.
Mist Maker DK9
Ventilution mist maker 9 membranes and Humidifier.
- Using a floating switch, the mist generator can be operated in tanks of any size.
- In addition, the mist can be districuted in the room to be humidified using a circulation fan.
- MANUFACTURER Ventilution
- MODEL 9 membranes
- DIAMETER 120mm
- HEIGHT 33mm
- CERAMIC DISC DIAMETER 20mm
- OPERATING VOLTAGE 36V
- CURRENT 6.5A
- POWER 250W
- WIRE LENGHT 7.5m
- WATER CONSUMPTION L/H
VDL SUPERMIST 4L - humidifier
The humidifier has a tank of 4 liters and an analog selector to adjust the required humidity.
An integrated safety system stops the humidifier in case the tank water runs out if there is an overheating of the equipment due to unknown causes.Its humidification capacity is 260 ml / h, so it can humidify 15 hours continuously.It is accompanied by a cleaning and maintenance kit.
Exhale CO2 bag
Photosynthesis is the process by which plant leaves make carbohydrates.
Sunlight, CO2 and water are converted into carbohydrates and O2 by the action of chlorophyll in the chloroplasts of the plant. Plants growing indoors under artificial light often lack enough CO2 to efficiently photosynthesize. When plants are able to maximize the process of photosynthesis, the result is larger plants with larger yields.
ExHale cultivates CO2 24 hours a day with no need to refill bottles or use expensive CO2 production units. The power of ExHale lies in the mycelial mass inside the vented cultivator. This mycelial mass cultivates CO2 and the microporous breather patch releases CO2 continually for up to 6 months.
The ExHale Cultivator is designed for small to medium grow spaces , or more specifically 1 ExHale Cultivator will provide 4-6 plants with the CO2 they need. ExHale can be used for both vegetative plant growth as well as for fruit and flower production.
VDL MEGAMIST 8L - humidifier
VDL MEGAMIST 8L - room humidifier
The appliance has an 8 liter reservoir and an analog selector for adjusting the required humidity. The integrated safety system stops the humidifier in case the tank's water leaks out if there is overheating of the equipment for unknown reasons. Its moisturizing capacity is 380ml / h, so it can moisturize for 15 hours continuously.
It is accompanied by a cleaning and maintenance kit.
Rhino Pro Ø 250 - 1350 m3/h
The Rhino Pro Filter is constructed from Australian-mined RC412 carbon, the best in the world.
The carbon is tightly packed and sealed into a high-efficiency airflow cylinder with a vortex cone in the base and a custom pore surface for maximum transference. The high-porosity carbon and lightweight aluminium make the Rhino filter smaller and easier to handle. How long will a Rhino Pro Filter last?
Unlike all other carbon filters with effective life spans of 9 to 18 months, our filters have always been known to have an out lasting performance for well over two years. Replacement carbon sleeves are available to make them last even longer.
Mini VDL - dehumidifier
The Dehumidifier Mini VDL may be used to decrease the humidity in small crops.
It is ideal to reduce and control the humidity of the atmosphere of your indoor growing. With Dehumidifier Mini VDL we will avoid problems with excess moisture especially during the flowering phase, avoiding the emergence of problematic fungi and molds, such as botrytis and powdery mildew.
Also can solve your problems of humidity during the drying with our dehumidifiers, since the moisture is one of them older inconvenient for the drying of our plants, with this will avoid risks unnecessary.
Features:
- Dimensions 17 x 17, 6, 6 x 15 cm auto-off when the tank is full.
- LED indicator.
- Capacity of dehumidification: 350 ml / day (to 30 ° C and 80 %HR)
- capacity of the tank: 650 ml
- consumption electric: 23 W
- technology patented ERS (Energy Recycle System)
- module Peltier thermo-electric (avoids the use of compressor or substances chemical for the absorption of the moisture)
- Super silent.)
VDL DIGIMIST 6 L - humidifier
VDL DIGIMIST 6 L - humidifier for room
The operation of the appliance is completely silent and provides fine atomization of water with ultrasound through the adjustable 360º steam outlet.
- Ionizer function and auto-off function when there is no water.
- Ideal for premises up to 30 m2.
- The volume of work is 300 ml / h, and the tank allows 20 to 60 hours of continuous operation without having to fill.
- Consumption: 30 W.
RAM WALL HUMIDIFIER 1.6L /H
The wall humidifier has a module for wall mounting
Easy to use with a humidification system from 20% to 100% humidity. The RAM wall humidifier can be used as a standalone product or together with a water filter kit.
In particular, suitable for consumers in areas with hard water, where it is recommended to use a water filter with a humidifier to protect its durability.
Advantages:
- Prevent dryness in the greenhouse
- Easy to use, hydrostat control with dial
- Up to 1600 ml / hr
- No charges required - connects to the water network (all fittings included)
An ultrasonic humidifier uses a ceramic diaphragm vibrating at an ultrasonic frequency to create water droplets that quietly exit the humidifier in the form of cool mist.
Cornwall Dehumidifier 10l / day
The growroom climate is essential for a successful cultivation
Cornwall Electronics Dehumidifier 10L/day is perfect for a medium size growing area. Adjusting the humidity of the cultivation area. High humidity during the growth stage is very important, but even more so during the flowering one. This dehumidifier takes care of this, preventing mold and mildew on plants. It also serves to dry the crop. Connectable to a rubber hose.
The dehumidifier 10L Cornwall has a tank of 2.5 liters, which once filled automatically shuts down the operation. It also has the possibility to be connected to a rubber tube that could be used as drain and the dehumidifier would maintain its activity on a continuous basis (essential in cases of extreme humidity).
Drybox VDL 12L/day 240W - dehumidifier
A high humidity in growth is very important but it is even more important that it is low during flowering.
This VDL dehumidifier will help you control humidity during this phase, avoiding fungi and molds. It also serves to dry the harvest. It is perfect for medium-large-sized crops because it extracts 6 to 12 liters of water per day from the environment.
It has a 2.6-liter accumulation tank, which automatically cuts off the operation of the tank when it is full, although it also has the possibility of using a rubber tube that would be used as a drain and which would allow the dehumidifier to be kept on continuously in cases of extreme environmental humidity.
Specifications:
- Brand: VDL
- Model: DRYBOX
- Refrigerant gas: R-134a 120 gr.
- Max. Airflow: 120 m³ / h
- Max dehumidification: 12 Liters / 24h
- Suitable for rooms up to: 12 m² / 30 m³
- Power supply: 230 V / 50 Hz
- Max power consumption: 0.24 kW
- Noise level: 45 dB (A)
- Operating temperature: 5 to 35 ° C
- Operating humidity: 49 to 100% relative humidity
- Automatic defrosting: electronic
- Water tank: 2,6L
- Dimensions: 385x265x530mm
Content of the shipment
- Air dehumidifier VDL 12L / day - 250W (DRYBOX)
- User's manual
Rhino Pro Ø 200 - 1800 m3/h
Constructed from Australian-mined RC412 carbon, the best in the world.
The carbon is tightly packed and sealed into a high-efficiency airflow cylinder with a vortex cone in the base and a custom pore surface for maximum transference. The high-porosity carbon and lightweight aluminium make the Rhino filter smaller and easier to handle. How long will a Rhino Pro Filter last? Unlike all other carbon filters with effective life spans of 9 to 18 months, our filters have always been known to have an out lasting performance for well over two years.
Replacement carbon sleeves are available to make them last even longer.
Drybox VDL 50lt / Day
Dehumidifier Drybox VDL 50lt / Day
Dehumidifier for domestic and semi-industrial use.
Boost Buddy CO2 bag
The Boost Buddy” is a safe, organic way to add Co2 to your smaller indoor growing environment (4×4 or smaller) and is usable during all stages of growth from vegetative to fruiting.
“The Boost Buddy” is constantly producing Co2 and requires no daily maintenance and produces no electricity or heat. Simply place“The Boost Buddy” inside your growing environment and watch as your garden grows and benefits from it’s all-natural Co2.
For areas larger than a 4×4, The Boost Buddy is to be used as an “ACCESSORY ONLY” to your all-natural, organic Co2 generator The Co2Boost.
Drybox VDL 105lt / Day
Dehumidifier Drybox VDL 105lt / Day
Dehumidifier for domestic and semi-industrial use.
Characteristics:
- Dimensions: 99x54x41cm
- Maximum Power Consumption: 1160W
- Noise: 56dB
- Fan speeds: 2
AirFan HS-300 Healthcare
The Airfan Healthcare HS-300 humidifier is a fully automatic humidifying system used to control the right humidity level in medium and large areas up to 300m³.
For human comfort and health the target humidity should be between 40 to 60%. The Airfan HS-300 humidifier is suitable for hotel, lobby, office, cinema, theater, shops, restaurants, leisure and sport centre.
FEATURES
- Suitable for medium and large spaces
- A single unit serves for spaces up to 300m3 (i.e. 100m2 x H:3m). Can be used in group, creating a humidifying system via water-pipe
- Ultra fine mist output
- It creates very fine mist droplets (D20 um of other humidifiers), that guarantees a gasification rate of up to 80%, preventing droplets to fall on the floor
- Easy to connect to the water supply or water tank FlexiTank
- Intelligent humidity AUTO-Control
- A built-in hygrostat enables the possibility of environment humidity control (20%-100%) based on demands
- Automatic control of humidity output
- Overflow protection and automatic shutdown protection when water shortage
- High efficiency
- Very low water and energy consumption
- Antibacterial & Healthy
- Contains silver ion antibacterial technology for 100% hygienic mist
- Clean air solutions
- Reduces the amount of dust in the air and improves the air freshness
- Cooling effect
- Helps to reduce the temperature up to 2 °C
- Simple installation
- Wall mounted installation, push fit connector for fast installation
Rhino Pro Ø 315 - 1800 m3/h
The Rhino Pro Filter is constructed from Australian-mined RC412 carbon, the best in the world.
The carbon is tightly packed and sealed into a high-efficiency airflow cylinder with a vortex cone in the base and a custom pore surface for maximum transference. The high-porosity carbon and lightweight aluminium make the Rhino filter smaller and easier to handle. How long will a Rhino Pro Filter last?
Unlike all other carbon filters with effective life spans of 9 to 18 months, our filters have always been known to have an out lasting performance for well over two years. Replacement carbon sleeves are available to make them last even longer.
Float and valve for humidifier HR15/HR50
Humidifier Valve Float
- Suitable for humidifier HR15
- Suitable for humidifier HR50
- With connection for 3cm hose
HR-15 Humidifier
Humidifier HR-15
Since plants lose water through their stomata (small openings on the surface of the leaves), if the moisture levels in the surrounding atmosphere are too low, then the volume of water emitted by the plants through their pitches will be higher, which may be very negative impact (stress and poor health). Raising the moisture level in the atmosphere when needed will have a huge impact on plant growth and vitality.
The HR-15 is a fully automated device that takes water from a separate source (via a float switch system) and distributes it to the air when necessary based on the readings made by its sensor device.
Features:
- Easy to use (connects to crane or water tank)
- Various placement options (wall mounting)
- Seamless simple structure (high durability)
- Suitable for chemical disinfection and removal of unpleasant odors
- Suitable for wood products, electronics, textiles, cigarette factories, low temperature warehouses and mushroom cultivation
HR-25 professional humidifier
Humidifier FARAN HR-25
- Coverage : 30-60 sq.meters(320-640 sq.ft)
- Power supply : 110V/50Hz or 220V/60Hz
- Power consumption : 90W
- Humidification capacity : 2,500cc/hour(0.66gallon/hour)
- Feed water pressure : less than 5kg/sq.cm.
- Dimensions : 330 X 330 X 350 mm (12.99" X 12.99" X 13.78")
FEATURES
- Easy to install (connect to water tap or water tank)
- Various space usage (on-wall)
- Easy to carry by handle
- Trouble free simple structure (high durability)
- Good for chemical disinfection & deodorization
- Good for electronics, textile, tobacco factories, low-temperature warehouse and mushroom cultivation
APPLICATIONS
Greenhouse, propagation room, research chamber, storage room, nursery, mushroom and orchid cultivation, chicken-breeding, textile, tobacco and timber industries.
NO MERCY SUPPLY
NO MERCY SUPPLY With this package of CO2 Tabs you will possess a revolutionary new and very powerful product aimed at plants on any growth medium.
These simple – and cheap! – Tablets are specially developed to replace the complicated and expensive CO2 fertilizing systems used until today.
Growth stagnation of plants is often caused by a shortage of carbondioxide; in badly aired spaces this shortage can be dramatic. With CO2 Tabs you can offer the carbon dioxide directly to the roots of your plants and significantly increase the speed of growth.
Only healthy plants will be able to effectively use this extra input. During extensive testing we perceived as the possible side affect a shortage of magnesium due to the high speed of growth. The tabs release the CO2 in the water and thus stimulate the growth. Healthy plants can absorb many times more of this important nutrient CO2 as is available in the air.
Attention: Adding CO2 short before the dark period doesn’t give any results! During the dark period the plant doesn’t absorb any CO2. The tabs bond the CO2 about 4 to 6 hours to the offered water.
Application: When your plants (or cuttings) are healthy you can use 1 tablet per 100 liters of water. In hydro systems you can also simply add the tablet to the barrel. Overdosing is neither harmful nor useful. If you want to add the CO2Tab instantly, first solve it in a cup of water (gently crush the tablet with your finger in the water) and mix it the with the water that is intended for the plants. Apply twice weekly for optimal results, and preferably during the whole growing cycle of your plants.
CO2 Tabs are available in 60 and 150 pcs.
HR-50 Humidifier
A humidifier's main job is to pump moisture and humidity in to the growroom
The Centrifugal Humidification System HR-50 is ideal for indoor growing. Not only will it help you to ensure an optimum level of relative humidity (50-75%) in your grow room, it's also:
•Compact enough to fit into small growing areas
•Easy to install (connects to water tap or water tank)
•Easy to carry by handle
•Can be connected to another reservoir for automatic top-up.
•Suitable for propagation
we recommend using a humidistat with the humidifier for accurate controler
- Coverage 100-150m²
- Power Consumption 90W
- Humidification Capacity 2,500cc / 4,000 cc/hour
- Feed-Water Pressure Less than 5kgs/cm²
- Dimensions 37cm x 37cm x 48cm
HR-707 centrofugal humidifier
HR-707 centrofugal humidifier
FEATURES
- Easy to install (Connect to water tap or water tank)
- Various spoace usage (on-wall), Easy to carry by handle
- Trouble-free simple structure (High durability), Good for chemical disinfection&deodorization
- Good for electronics, textile, tobacco facories, low-temperature warehouse and mushroom cultivation.
APPLICATIONS
Greenhouse, propagation room, research chamber, storage room, nursery, mushroom and orchid cultivation, chicken-breeding textile, tobacco and timber industries.
SPECIFICATIONS
- Coverage : 100-150m2(1,176-1,614ft2)
- Power Supply : 110V or 220V/ 50Hz or 60Hz
- Power Consumption : 90W
- Humidification Capacity : 4,000cc(1,05gallon/hour)
- Feed-Water Pressure : Less than 5kg/cm2
- Dimensions : 400 X 400 X 380mm(15,75" X 15.75" X 14.96"
Rhino Pro Ø 315 - 2700 m3/h
Constructed from Australian-mined RC412 carbon, the best in the world.
The carbon is tightly packed and sealed into a high-efficiency airflow cylinder with a vortex cone in the base and a custom pore surface for maximum transference. The high-porosity carbon and lightweight aluminium make the Rhino filter smaller and easier to handle. How long will a Rhino Pro Filter last? Unlike all other carbon filters with effective life spans of 9 to 18 months, our filters have always been known to have an out lasting performance for well over two years.
Replacement carbon sleeves are available to make them last even longer.
CEZIO humidifier
The Best Humidification System CEZIO
Choose the CEZIO for small to midsize applications or for use in areas where quiet operation is a must. Its very dry fog is ideal for greenhouse environments, mushroom growing, germination rooms, cigar shops, research chambers and storage areas.Quiet enough for residential use, CEZIO is your best bet for small environmental applications.Impressive clouds of smoky fog will add cool humidity to your midsize room.CEZIO's 2 GPH fogging capability will quickly cool and humidify and its low energy consumption saves envergy costs.
- No wiring necessary - plugs directly into a standard electrical outlet (220V/50Hz or 115V/60Hz).
- Unit should be connected directly to a water supply or can be gravity fed. An internal float valve will automatically fill a water reservoir.
- Unit connects to standard 6mm or1/4" OD tubing.
- Ideal for greenhouses up to 500sq.ft.,
- Humidifies up to 800 sq,ft. for mushroom growing,
- Abundant cool humidify for storage areas and research chambers up to 1000 sq.ft.
- For maximum fogging and circulation, operate unit without the lower housing as well as upper shousing and fogging head.
- Fog will propel 4~5 feet above the unit.
- Coverage : 100~150m2 (1,176~1,614ft2)
- Power Supply : 110V or 220V / 50Hz or 60Hz
- Particle Size : 5~20 microns
- Power Consumption : 90W
- Humidfication Capacity : 3,000cc ~ 5,000cc/hour
- Feed-Water Pressure : Less than 5kg/cm2
- Dimensions : 389 X 389 X 455mm (460 X 460 X 550mm:package)
- Net Weight : 7.7kgs(9.5kgs : shipping weight)
* Safety Approval : ISO, CE
Quest 70 - dehumidifier
The Quest 70 is energy-efficient commercial dehumidifier
Removing 70 pints of water per day, this unit can save you thousands in energy costs every year compared to the competition. It gives you the flexibility to hang the unit overhead or use ductwork and keep the dehumidifier in a different space entirely.Like all Quest products, the 70 is made in the USA using the very best components and materials available.
Short specs:
- WATER REMOVAL: 70 PINTS/DAY AT 80F, 60% RH
- EFFICIENCY OF 5.0 PINTS/KWH
- POWER: 8.0 AMPS, 110-120V
- ONBOARD DEHUMIDISTAT AND LOW VOLTAGE TERMINAL BLOCK
QUEST CDG 74 - dehumidifier
The Quest 70 is energy-efficient commercial dehumidifier
Removing 70 pints of water per day, this unit can save you thousands in energy costs every year compared to the competition. It gives you the flexibility to hang the unit overhead or use ductwork and keep the dehumidifier in a different space entirely.Like all Quest products, the 70 is made in the USA using the very best components and materials available.
Short specs:
- WATER REMOVAL: 70 PINTS/DAY AT 80F, 60% RH
- EFFICIENCY OF 5.0 PINTS/KWH
- POWER: 8.0 AMPS, 110-120V
- ONBOARD DEHUMIDISTAT AND LOW VOLTAGE TERMINAL BLOCK
Quest Dual 155 - dehumidifier
The Quest Dual 155 is one of the most energy-efficient commercial dehumidifiers on the market today.
Removing 155 pints of water per day, this unit can save you thousands in energy costs every year compared to the competition. It gives you the flexibility to hang the unit overhead or use ductwork and keep the dehumidifier in a different space entirely.
Like all Quest products, the Dual 155 is made in the USA using the very best components and materials available.
Short specs:
- WATER REMOVAL: 155 PINTS/DAY AT 80F, 60% RH
- EFFICIENCY OF 7.3 PINTS/KWH
- POWER: 8.0 AMPS, 110-120V
- TERMINAL BLOCK WITH 24V WIRING FOR EXTERNAL CONTROL OPTIONS
Ocean Mist - humidifier
This device uses the oscillation of high frequency ultrasound to transform the electrical oscillation into mechanical oscillation, using a ceramic disc of 12 membranes, and you can add up to 3 discs more of 12 membranes to get more power.
So Ocean Mist turns water into steam, eliminates static electricity and freshens the air.It is suitable for humidifying large crops or greenhouses.Keep in mind that in dry areas or excess heat greenhouses, there is a low relative humidity. Also you must know that growing plants should be between 60 and 75% relative humidity, at flowering under 60% and cuttings over 80% relative humidity.
Monster Fogger - humidifier
Very powerful and durable centrifugal humidifier.
It has a Tank of 4,5 L for Water with float-valve control.This humidifier has to be connected directly to the tap water or to a bigger tank.The Monster Fogger need 4 to 5 L of Water per hour.New version has fully covered propeller which makes it more safe to use.Three different diffuser possibilities- Open, Net cap, 3-Way cap Environmental friendly because of less water usage.
Technical specifications:
- Power Consumption: 230V, 50Hz 0.6A; 230V, 60Hz 0.85A
- Rotation Speed: 50Hz 2700 - 2900/1 (RPM/M); 60Hz 3300 - 3450/1 (RPM/M)
- Diffusion range: 20 square meters
- Spraying height: 2.5 - 3.5 meters
- Measurements: 52 x 40 cm
Mother Fogger - humidifier
Powerful humidifier able to generate 7 liters of fog per hour thanks to a powerful system of ceramic ultrasonic plates with nickel and titanium alloy.
It has an external potentiometer that controls a fan integrated into the humidifier's own structure. This fan drives the moisture so that it reaches all points of the greenhouse and distributes evenly. It has a network outlet for direct connection to a tap or water supply. There is an NH50 filter so that the water becomes as clean as possible inside the humidifier, although it would be appropriate to use osmosis water to increase the life of ceramic discs.
They should be replaced when you notice that the generated humidity level is different than usual.
VDL Co2 Meter
Large display continually monitors the primary IAQ (Indoor Air Quality) parameters: Air Temperature, RH, CO2.
These Indoor Air Quality (IAQ) monitors have large easy-to-read displays that continually present primary IAQ parameters: Air Temperature, Relative Humidity (RH), CO2 (carbon dioxide). IAQ monitors are ideal for observing indoor air quality in crowded public spaces with potentially high levels of CO2 such as offices, factories, classrooms, hospitals and hotels. These units recall min/max CO2 levels and provides visual alarms for maximum CO2 threshold. Automatic Baseline Calibration (ABC) and maintenance free NDIR (non-dispersive infrared) CO2 sensor ensure long-term accuracy, stability and reliability. Units come with an AC adaptor and will stand on a desk-top or wall mount.
Demand for quality indoor air continues to increase as we are spending more time indoors than ever before. IAQ issues can be complex due to the diversity of indoor environments. Poor air quality may cause tiredness, inability to concentrate, and even illness (i.e., Sick Building Syndrome).
To address problems caused by poor IAQ, national and local governments have developed guidelines for acceptable indoor air quality. Assessing indoor air quality in buildings begins with IAQ investigations using professional grade measuring instruments as the first step in creating a healthier work environment.
- Datalogging Indoor Air Quality Monitor- 800049
- Records up to 32,000 data points that can be downloaded to your computer using the USB cable included.
- Dimensions: 4½" × 4¼" × 1" (108 × 115 × 25 mm)
CAN filter Lite Ø125 - 300 m3/h
The Can-Lite carbon filter is the latest addition to the Can-Filters Carbon filter range.
Recently released after years of testing and research, the Can-Lite has been developed with ease of installation, durability and effectiveness in mind.
The Can-lite is manufactured using a similar process to Can-Filter 'Classic but instead using a highly perforated, light aluminum casing and a special grade of virgin CKV-4 carbon. This allows the filters to be lighter and handle larger air flow rates without any odor breakthrough.
Features:
-
Light weight
-
Can handle relatively high (fan) flow rates
-
Flanges are pre-fitted to the filter
-
Packaged in their own individual carton
-
Pre-filter included
Can-IN- Line Ø150mm - 600m3/h
When it comes to air filtration and innovation in ventilation systems, Can-Filters is the market leader.
Can-IN-Line filter is built into a metal housing with inlet and outlet, which allows it to be mounted directly in the built-in pipelines rather than at the extraction point.
It can be used as a primary filter in or outside the cultivation area or as a second air filtration filter. The Lite carries a shelf life of at least 18 months at a humidity of 70% and a temperature of 80 ° C.
Can Inline Filter 600 is an activated charcoal filter with a capacity of 600m3 and a flange size of 150mm. It purifies the air and removes dangerous and smelly gases - ammonia, formaldehyde, volatile organic compounds (VOC), etc. Unlike other carbon filter models, this model has air ducts at both ends, allowing double air filtration or filter positioning after the extractor. Can Inline 600 degrades catalytic ozone, not designed for dust filtering, fine dust particles, smoke. It is desirable to mount a dust filter in front of the flow filter.
- Capacity: 600 m³
- Flange: 150 mm
- Length: 73 cm
- Weight of activated carbon: 2.2 kg
- Thickness of layer of activated carbon - 5 cm
- Working life: 12 - 18 months (depending on load, humidity and dustiness)
Can-IN- Line Ø160mm - 600m3/h
When it comes to air filtration and innovation in ventilation systems, Can-Filters is the market leader.
Can-IN-Line filter is built into a metal housing with inlet and outlet, which allows it to be mounted directly in the built-in pipelines rather than at the extraction point.
It can be used as a primary filter in or outside the cultivation area or as a second air filtration filter. The Lite carries a shelf life of at least 18 months at a humidity of 70% and a temperature of 80 ° C.
Can Inline Filter 600 is an activated charcoal filter with a capacity of 600m3 and a flange size of 150mm. It purifies the air and removes dangerous and smelly gases - ammonia, formaldehyde, volatile organic compounds (VOC), etc. Unlike other carbon filter models, this model has air ducts at both ends, allowing double air filtration or filter positioning after the extractor. Can Inline 600 degrades catalytic ozone, not designed for dust filtering, fine dust particles, smoke. It is desirable to mount a dust filter in front of the flow filter.
- Capacity: 600 m³
- Flange: 160 mm
- Length: 73 cm
- Weight of activated carbon: 2.2 kg
- Thickness of layer of activated carbon - 5 cm
- Working life: 12 - 18 months (depending on load, humidity and dustiness)
Can-IN- Line Ø200mm - 1000m3/h
When it comes to air filtration and innovation in ventilation systems, Can-Filters is the market leader.
Can-IN-Line filter is built into a metal housing with inlet and outlet, which allows it to be mounted directly in the built-in pipelines rather than at the extraction point.
It can be used as a primary filter in or outside the cultivation area or as a second air filtration filter. The Lite carries a shelf life of at least 18 months at a humidity of 70% and a temperature of 80 ° C.
Can Inline Filter is an activated charcoal filter that purifies the air and removes dangerous and smelly gases - ammonia, formaldehyde, volatile organic compounds (VOC), etc. Unlike other carbon filter models, this model has air ducts at both ends, allowing double air filtration or filter positioning after the extractor. Can Inline degrades catalytic ozone, not designed for dust filtering, fine dust particles, smoke. It is desirable to mount a dust filter in front of the flow filter.
- Capacity: 1000 m³
- Flange: 200 mm
- Length: 77.5 cm
- Weight of activated carbon: 5.1 kg
- Thickness of layer of activated carbon - 5 cm
- Working life: 12 - 18 months (depending on load, humidity and dustiness)
Can-IN- Line Ø200mm - 1500m3/h
When it comes to air filtration and innovation in ventilation systems, Can-Filters is the market leader.
Can-IN-Line filter is built into a metal housing with inlet and outlet, which allows it to be mounted directly in the built-in pipelines rather than at the extraction point.
It can be used as a primary filter in or outside the cultivation area or as a second air filtration filter. The Lite carries a shelf life of at least 18 months at a humidity of 70% and a temperature of 80 ° C.
Can Inline Filter is an activated charcoal filter that purifies the air and removes dangerous and smelly gases - ammonia, formaldehyde, volatile organic compounds (VOC), etc. Unlike other carbon filter models, this model has air ducts at both ends, allowing double air filtration or filter positioning after the extractor.
Can Inline degrades catalytic ozone, not designed for dust filtering, fine dust particles, smoke. It is desirable to mount a dust filter in front of the flow filter.
- Capacity: 1500 m³
- Flange: 200 mm
- Length: 102.5 cm
- Weight of activated carbon: 7.6 kg
- Thickness of layer of activated carbon - 5 cm
- Working life: 12 - 18 months (depending on load, humidity and dustiness)
Can-IN- Line Ø250mm - 1500m3/h
When it comes to air filtration and innovation in ventilation systems, Can-Filters is the market leader.
Can-IN-Line filter is built into a metal housing with inlet and outlet, which allows it to be mounted directly in the built-in pipelines rather than at the extraction point.
It can be used as a primary filter in or outside the cultivation area or as a second air filtration filter. The Lite carries a shelf life of at least 18 months at a humidity of 70% and a temperature of 80 ° C.
Can Inline Filter is an activated charcoal filter that purifies the air and removes dangerous and smelly gases - ammonia, formaldehyde, volatile organic compounds (VOC), etc. Unlike other carbon filter models, this model has air ducts at both ends, allowing double air filtration or filter positioning after the extractor. Can Inline degrades catalytic ozone, not designed for dust filtering, fine dust particles, smoke. It is desirable to mount a dust filter in front of the flow filter.
- Capacity: 1500 m³
- Flange: 250 mm
- Length: 102.5 cm
- Weight of activated carbon: 7.6 kg
- Thickness of layer of activated carbon - 5 cm
- Working life: 12 - 18 months (depending on load, humidity and dustiness)
CAN filter Lite Ø425m3 -125mm
The Can-Lite carbon filter is the latest addition to the Can-Filters Carbon filter range.
Recently released after years of testing and research, the Can-Lite has been developed with ease of installation, durability and effectiveness in mind.
The Can-lite is manufactured using a similar process to Can-Filter 'Classic but instead using a highly perforated, light aluminum casing and a special grade of virgin CKV-4 carbon. This allows the filters to be lighter and handle larger air flow rates without any odor breakthrough.
Features:
-
Light weight
- Can handle relatively high (fan) flow rates
- Flanges are pre-fitted to the filter
- Packaged in their own individual carton
- Pre-filter included
Can-IN- Line Ø250mm - 2500m3/h
When it comes to air filtration and innovation in ventilation systems, Can-Filters is the market leader.
Can-IN-Line filter is built into a metal housing with inlet and outlet, which allows it to be mounted directly in the built-in pipelines rather than at the extraction point.
It can be used as a primary filter in or outside the cultivation area or as a second air filtration filter. The Lite carries a shelf life of at least 18 months at a humidity of 70% and a temperature of 80 ° C.
Can Inline Filter is an activated charcoal filter that purifies the air and removes dangerous and smelly gases - ammonia, formaldehyde, volatile organic compounds (VOC), etc. Unlike other carbon filter models, this model has air ducts at both ends, allowing double air filtration or filter positioning after the extractor.
Can Inline degrades catalytic ozone, not designed for dust filtering, fine dust particles, smoke. It is desirable to mount a dust filter in front of the flow filter.
- Capacity: 2500 m³
- Flange: 250 mm
- Length: 120 cm
- Weight of activated carbon: 12.2 kg
- Thickness of layer of activated carbon - 5 cm
- Working life: 12 - 18 months (depending on load, humidity and dustiness)
Can-IN- Line Ø315mm - 3000m3/h
When it comes to air filtration and innovation in ventilation systems, Can-Filters is the market leader.
Can-IN-Line filter is built into a metal housing with inlet and outlet, which allows it to be mounted directly in the built-in pipelines rather than at the extraction point.
It can be used as a primary filter in or outside the cultivation area or as a second air filtration filter. The Lite carries a shelf life of at least 18 months at a humidity of 70% and a temperature of 80 ° C.
Can Inline Filter is an activated charcoal filter that purifies the air and removes dangerous and smelly gases - ammonia, formaldehyde, volatile organic compounds (VOC), etc. Unlike other carbon filter models, this model has air ducts at both ends, allowing double air filtration or filter positioning after the extractor.
Can Inline degrades catalytic ozone, not designed for dust filtering, fine dust particles, smoke. It is desirable to mount a dust filter in front of the flow filter.
- Capacity: 3000 m³
- Flange: 315 mm
- Length: 126 cm
- Weight of activated carbon: 12.2 kg
- Thickness of layer of activated carbon - 5 cm
- Working life: 12 - 18 months (depending on load, humidity and dustiness)
AirGuardian CO2 monitor
Carbon dioxide (CO2) is a gaseous component of the earth's atmosphere.
The concentration of CO2 in natural ambient air is about 0.04% or 400ppm. With each breath, humans convert oxygen (O2) into carbon диоксиде which is invisible and odorless, an increased CO2-content makes is apparent because humans will notice increased fatigue and reduced concentration. In rooms with high occupancy such as conference rooms and theatres, negative effects become all the more evident.
Technical specs:
- Super large LCD simultaneously display of CO2 level, Temp., relative humidity, Date and Time.
- Six (6) smiley icons indicate indoor air quality levels (350/450/700/1000/2500/5000ppm), easy to understand CO2 concentration.
- Stable NDIR sensor for CO2 detection
- Hi alarm threshold is selectable, easy to reset default setting by pressing one button. Automatic Baseline Calibration (ABC)
- Audible warning for high CO2 concentration
- Visable LED meter status.
- Leaflet download: GT2500 2014 Eng
CAN filter Lite Ø425m3 -125mm - S
The Can-Lite carbon filter is the latest addition to the Can-Filters Carbon filter range.
Recently released after years of testing and research, the Can-Lite has been developed with ease of installation, durability and effectiveness in mind.
The Can-lite is manufactured using a similar process to Can-Filter 'Classic but instead using a highly perforated, light aluminum casing and a special grade of virgin CKV-4 carbon. This allows the filters to be lighter and handle larger air flow rates without any odor breakthrough.
Features:
-
Light weight
-
Can handle relatively high (fan) flow rates
-
Flanges are pre-fitted to the filter
-
Packaged in their own individual carton
-
Pre-filter included
CO2 Portable Monitor 4 in 1
New CO2 Monitor
Lowest cost CO2, temperature and %RH meter on the market today.
It provides:
- High speed, real time measurement
- High degree of accuracy
- The TIM10 is a simple-to-use solution for monitoring carbon dioxide, temperature and relative humidity using either 110-220 VAC.
With its patented ABC (automatic background calibration) system the TIM10 actually gets more accurate the longer you leave it plugged in (under normal conditions).
CAN filter Lite Ø150mm - 600m3
The Can-Lite carbon filter is the latest addition to the Can-Filters Carbon filter range.
Recently released after years of testing and research, the Can-Lite has been developed with ease of installation, durability and effectiveness in mind. The Can-lite is manufactured using a similar process to Can-Filter 'Classic but instead using a highly perforated, light aluminum casing and a special grade of virgin CKV-4 carbon. This allows the filters to be lighter and handle larger air flow rates without any odor breakthrough.
Features:
-
Flanges are pre-fitted to the filter
-
Packaged in their own individual carton
-
Pre-filter included
GSE CO2 Controller + Valve
The CO2 Controller regulates temperature, humidity and CO2 content in the room.
- Case: WxHxD = 130x180x75mm
- Controller: WxHxD = 160x250x75mm
- Designed for: 2x600W / TRIAC 2x16A
- Volts: 230V / 50HZ
- Digital sensor 5V Measures humidity accuracy ±4.5%rh
- Protection class IP44
CAN filter Lite Ø160mm - 600m3
The Can-Lite carbon filter is the latest addition to the Can-Filters Carbon filter range.
Recently released after years of testing and research, the Can-Lite has been developed with ease of installation, durability and effectiveness in mind.
The Can-lite is manufactured using a similar process to Can-Filter 'Classic but instead using a highly perforated, light aluminum casing and a special grade of virgin CKV-4 carbon. This allows the filters to be lighter and handle larger air flow rates without any odor breakthrough.
Features:
-
Light weight
-
Can handle relatively high (fan) flow rates
-
Flanges are pre-fitted to the filter
-
Packaged in their own individual carton
-
Pre-filter included
CAN filter Lite Ø 150 - 800 m3/h
The Can-Lite carbon filter is the latest addition to the Can-Filters Carbon filter range.
Recently released after years of testing and research, the Can-Lite has been developed with ease of installation, durability and effectiveness in mind.
The Can-lite is manufactured using a similar process to Can-Filter 'Classic but instead using a highly perforated, light aluminum casing and a special grade of virgin CKV-4 carbon. This allows the filters to be lighter and handle larger air flow rates without any odor breakthrough.
Features:
-
Light weight
-
Can handle relatively high (fan) flow rates
-
Flanges are pre-fitted to the filter
-
Packaged in their own individual carton
-
Pre-filter included
SUPERPRO CARBON-B1 ANALOG CO2 CONTROLLER
The Superpro Analog Co2 Controller is designed to cost-effectively control the CO2 level inside a growing area.
Features :
1. An extremely accurate NDIR CO2 PPM sensor (part-per-million meter) is combined with a digital microprocessor to create an accurate and simple method to control supplemental CO2 use in a greenhouse.
2. The unit can control CO2 levels up to 2500PPM.
3. The user selects the desired CO2 level to be maintained using the knobs on the Superpro Analog Co2 Controller.
4. A built-in photocell automatically activates the unit only during the day.
5. A pair of LEDs on the front face of the unit allows the user to quickly verify the ACTUAL CO2 level +/- 50 PPM.
6. The remote CO2 sensor can be placed up to 5 meters from the controller.
CAN filter Lite Ø 160 - 800 m3/h
The Can-Lite carbon filter is the latest addition to the Can-Filters Carbon filter range.
Recently released after years of testing and research, the Can-Lite has been developed with ease of installation, durability and effectiveness in mind.
The Can-lite is manufactured using a similar process to Can-Filter 'Classic but instead using a highly perforated, light aluminum casing and a special grade of virgin CKV-4 carbon. This allows the filters to be lighter and handle larger air flow rates without any odor breakthrough.
Features:
-
Light weight
- Can handle relatively high (fan) flow rates
- Flanges are pre-fitted to the filter
- Packaged in their own individual carton
- Pre-filter included