Ventilation and Climate

This digital fan controller is a temperature dependent speed controller for rooms with intake and exhaust fans.

The fan controller keeps the room temperature constant and at a certain minimum speed. The digital fan controller is a temperature dependent speed controller for rooms with air flow in and out. The fan controller keeps the room temperature constant and under pressure to prevent odour from escaping. This fan controller can by used also as only air out regulator on two fans if there is a nature way of air in.

Sizes and technical data's:

• Case: WxHxD = 130x80x70mm
• Controller: WxHxD = 160x100x90mm
• Designed for: 10A / 2300W / TRIAC 1x16A
• Volts: 230V / 50HZ
• Digital sensor 5V Measures temperatures from –55°C to +125°C (–67°F to +257°F)
• 0.5°C accuracy from –10°C to +85°C
• Protection class: IP54

Constructed from Australian-mined RC412 carbon, the best in the world.

The carbon is tightly packed and sealed into a high-efficiency airflow cylinder with a vortex cone in the base and a custom pore surface for maximum transference. The high-porosity carbon and lightweight aluminium make the Rhino filter smaller and easier to handle. How long will a Rhino Pro Filter last? Unlike all other carbon filters with effective life spans of 9 to 18 months, our filters have always been known to have an out lasting performance for well over two years.

Replacement carbon sleeves are available to make them last even longer.

The fan valve has the function of closing the vent fan opening when it is inactive.

When grown in a room with a strong odor, this prevents the odor from coming out through the fan body and the exhaust in the space around it.

The valve wings open under the pressure created by the airflow and then automatically close with the spring work. The valve is equipped with a special foam rubber filler reducing the noise level during its operation and ensuring the integrity of the system

Diameter: Ø150mm

Y connectors are components for a branch of a ventilation system. Thanks to them you can adapt the separated elements to the room in which growing your plants.

Fresh air is your friend! Each growing room (indoor) must have a well-designed ventilation system. In order for your garden to be successful and for the harvest to be of high quality, you must also consider cleaning, bringing fresh air into the room and ventilation. Here are the most important components needed to build the ideal ventilation system for your needs.

The fan valve has the function of closing the vent fan opening when it is inactive.

When grown in a room with a strong odor, this prevents the odor from coming out through the fan body and the exhaust in the space around it.

The valve wings open under the pressure created by the airflow and then automatically close with the spring work. The valve is equipped with a special foam rubber filler reducing the noise level during its operation and ensuring the integrity of the system

Diameter: Ø150mm

Fresh air is your friend! Each growing room (indoor) must have a well-designed ventilation system. In order for your garden to be successful and for the harvest to be of high quality, you must also consider cleaning, bringing fresh air into the room and ventilation.

Here are the most important components needed to build the ideal ventilation system for your needs.

The reducer is a metal component that is used to connect elements with different hole diameters.

Boxing relay switches two independent circuits - stopped them and release them.

It is operated by a third power cord that must be plugged into a timer switch or GSE timer box. Each of electricity networks can withstand 4x600W (total svetlinie 8x600W).

Sizes and technical data's:

• Case: WxHxD = 180x130x60mm
• Timer box: WxHxD = 160x100x90mm
• Volt: 2x230V / 50Hz
• Relays: 4x16A 230V
• Protection class: IP54

The fan valve has the function of closing the vent fan opening when it is inactive.

When grown in a room with a strong odor, this prevents the odor from coming out through the fan body and the exhaust in the space around it.

The valve wings open under the pressure created by the airflow and then automatically close with the spring work. The valve is equipped with a special foam rubber filler reducing the noise level during its operation and ensuring the integrity of the system

Diameter: Ø150mm

Fresh air is your friend! Each growing room (indoor) must have a well-designed ventilation system. In order for your garden to be successful and for the harvest to be of high quality, you must also consider cleaning, bringing fresh air into the room and ventilation.

Here are the most important components needed to build the ideal ventilation system for your needs.

The reducer is a metal component that is used to connect elements with different hole diameters.

Y connectors are components for a branch of a ventilation system. Thanks to them you can adapt the separated elements to the room in which growing your plants.

Fresh air is your friend! Each growing room (indoor) must have a well-designed ventilation system. In order for your garden to be successful and for the harvest to be of high quality, you must also consider cleaning, bringing fresh air into the room and ventilation. Here are the most important components needed to build the ideal ventilation system for your needs.

The fan valve has the function of closing the vent fan opening when it is inactive.

When grown in a room with a strong odor, this prevents the odor from coming out through the fan body and the exhaust in the space around it.

The valve wings open under the pressure created by the airflow and then automatically close with the spring work. The valve is equipped with a special foam rubber filler reducing the noise level during its operation and ensuring the integrity of the system

Diameter: Ø150mm

Fresh air is your friend! Each growing room (indoor) must have a well-designed ventilation system. In order for your garden to be successful and for the harvest to be of high quality, you must also consider cleaning, bringing fresh air into the room and ventilation.

Here are the most important components needed to build the ideal ventilation system for your needs.

The reducer is a metal component that is used to connect elements with different hole diameters.

Y connectors are components for a branch of a ventilation system. Thanks to them you can adapt the separated elements to the room in which growing your plants.

Fresh air is your friend! Each growing room (indoor) must have a well-designed ventilation system. In order for your garden to be successful and for the harvest to be of high quality, you must also consider cleaning, bringing fresh air into the room and ventilation. Here are the most important components needed to build the ideal ventilation system for your needs.

This EC fan controller have temperature, humidity and minimum speed setting on three knobs.

It is easy to use. The EC fan controller get supplied with a 4m long cable with a 3.5mm 4pole stereo jack connector to the fan and a 4m long Temperature senor.  It comes as a finish product together with a power supply. The eutput signal is 0-10V or on demand a PWM (pulse wide modulation) signal. If the EC-fan suppolt PWM signal the controller is able to run without power supply.

Settings range:
Temperature: 20C° to 30C°
Humidity: 30% - 100%
Minimum speed: off, 20% to -100%

Hotbox CO2 Generators enrich the atmosphere and encourage plant growth.

There are three models to choose from, suitable for growing areas ranging from 20m² to 4000m²

• Increase CO2 to 1000 ppm – achieve optimum growing environment
• Low running cost – runs on propane or natural gas (all of the CO2 Generator are supplied as propane with a conversation kit for natural gas)
• Easy installation – simply attach to supply, plug in and switch on
• Robust, lightweight construction – durable, yet easy to move around

The "MAX 1218" kit includes the main elements of a ventilation system - a fan and a filter.

Optionally, to the set can be added duct type Sonoconnect Ф203 x 2 meters - to take advantage of this option, please leave a comment with your order. The kit is suitable for rooms up to 9.70 square meters

Contains:

• outake fan Max  Ф200 / 1218m3 / h
• Can Lite filter Ф200 / 1500 m3 / h

Fresh air is your friend! Each growing room (indoor) must have a well-designed ventilation system. In order for your garden to be successful and for the harvest to be of high quality, you must also consider cleaning, bringing fresh air into the room and ventilation.

Here are the most important components needed to build the ideal ventilation system for your needs.

The reducer is a metal component that is used to connect elements with different hole diameters.

These plastic flanges install via an easy snap-on, tool-free, the connection forming a perfect seal with Can-Filters products.

Actually, you can choose between 100 and 125mm flange.

Fresh air is your friend! Each growing room (indoor) must have a well-designed ventilation system. In order for your garden to be successful and for the harvest to be of high quality, you must also consider cleaning, bringing fresh air into the room and ventilation. Here are the most important components needed to build the ideal ventilation system for your needs.

Y connectors are components for a branch of a ventilation system. Thanks to them you can adapt the separated elements to the room in which growing your plants.

Fresh air is your friend! Each growing room (indoor) must have a well-designed ventilation system. In order for your garden to be successful and for the harvest to be of high quality, you must also consider cleaning, bringing fresh air into the room and ventilation. Here are the most important components needed to build the ideal ventilation system for your needs.

The set "Rhino fan 200" is a suitable option for a room for growing with dimensions of about 9 square meters.

The set "Rhino fan 200" contains: 

- RHINO FILTERS Ø200 - 1125m3

- CAN Fan 200L / 1090 m³/h

Fresh air is your friend! Each growing room (indoor) must have a well-designed ventilation system. In order for your garden to be successful and for the harvest to be of high quality, you must also consider cleaning, bringing fresh air into the room and ventilation.

Here are the most important components needed to build the ideal ventilation system for your needs.

The reducer is a metal component that is used to connect elements with different hole diameters.

These plastic flanges install via an easy snap-on, tool-free, the connection forming a perfect seal with Can-Filters products.

Actually, you can choose between 100 and 125mm flange.

Fresh air is your friend! Each growing room (indoor) must have a well-designed ventilation system. In order for your garden to be successful and for the harvest to be of high quality, you must also consider cleaning, bringing fresh air into the room and ventilation. Here are the most important components needed to build the ideal ventilation system for your needs.

Y connectors are components for a branch of a ventilation system. Thanks to them you can adapt the separated elements to the room in which growing your plants.

Fresh air is your friend! Each growing room (indoor) must have a well-designed ventilation system. In order for your garden to be successful and for the harvest to be of high quality, you must also consider cleaning, bringing fresh air into the room and ventilation. Here are the most important components needed to build the ideal ventilation system for your needs.

This EC fan controller have temperature, minimum- and maximum speed setting on three knobs. It is easy to use.

The EC fan controller get supplied with a 4m long cable including a 3.5mm 4pole stereo jack connector to the fan and a 4m long Temperature senor.  It comes as a finish product together with a power supply. The eutput signal is 0-10V or on demand a PWM (pulse wide modulation) signal. If the EC-fan support a PWM signal the controller is able to run without power supply.

Settings range:

• Temperature: 20C° to 30C°
• Minimum speed: off, 20% to -100%
• Maximum speed: 100% to -50%

The set "Can Rhino 200" is suitable for rooms up to 9 sq.m.

The set "Can Rhino 200" contains: 

- RHINO FILTERS Ø200 - 1125m3

- CAN Fan 200L / 1090 m³/h

- 3m flexible duckting Sonoconnect 203mm

The Rhino Pro Filter is constructed from Australian-mined RC412 carbon, the best in the world.

The carbon is tightly packed and sealed into a high-efficiency airflow cylinder with a vortex cone in the base and a custom pore surface for maximum transference. The high-porosity carbon and lightweight aluminium make the Rhino filter smaller and easier to handle. How long will a Rhino Pro Filter last?

Unlike all other carbon filters with effective life spans of 9 to 18 months, our filters have always been known to have an out lasting performance for well over two years. Replacement carbon sleeves are available to make them last even longer.

Fresh air is your friend! Each growing room (indoor) must have a well-designed ventilation system. In order for your garden to be successful and for the harvest to be of high quality, you must also consider cleaning, bringing fresh air into the room and ventilation.

Here are the most important components needed to build the ideal ventilation system for your needs.

The reducer is a metal component that is used to connect elements with different hole diameters.

These plastic ducting wall flanges allow the quick and easy installation of ducting to a ventilation outlet or inlet in a wall, because of pre-drilled holes for screw fitting.

For installation, simply fit the corresponding size flange securely to the wall and attach the ducting with a clamp or clip. Sealant and screws are best for ensuring a secure fitting.

Fresh air is your friend! Each growing room (indoor) must have a well-designed ventilation system. In order for your garden to be successful and for the harvest to be of high quality, you must also consider cleaning, bringing fresh air into the room and ventilation. Here are the most important components needed to build the ideal ventilation system for your needs.

Y connectors are components for a branch of a ventilation system. Thanks to them you can adapt the separated elements to the room in which growing your plants.

Fresh air is your friend! Each growing room (indoor) must have a well-designed ventilation system. In order for your garden to be successful and for the harvest to be of high quality, you must also consider cleaning, bringing fresh air into the room and ventilation. Here are the most important components needed to build the ideal ventilation system for your needs.

Fresh air is your friend! Each growing room (indoor) must have a well-designed ventilation system. In order for your garden to be successful and for the harvest to be of high quality, you must also consider cleaning, bringing fresh air into the room and ventilation.

Here are the most important components needed to build the ideal ventilation system for your needs.

The reducer is a metal component that is used to connect elements with different hole diameters.

These plastic ducting wall flanges allow the quick and easy installation of ducting to a ventilation outlet or inlet in a wall, because of pre-drilled holes for screw fitting.

For installation, simply fit the corresponding size flange securely to the wall and attach the ducting with a clamp or clip. Sealant and screws are best for ensuring a secure fitting.

Fresh air is your friend! Each growing room (indoor) must have a well-designed ventilation system. In order for your garden to be successful and for the harvest to be of high quality, you must also consider cleaning, bringing fresh air into the room and ventilation. Here are the most important components needed to build the ideal ventilation system for your needs.

Y connectors are components for a branch of a ventilation system. Thanks to them you can adapt the separated elements to the room in which growing your plants.

Fresh air is your friend! Each growing room (indoor) must have a well-designed ventilation system. In order for your garden to be successful and for the harvest to be of high quality, you must also consider cleaning, bringing fresh air into the room and ventilation. Here are the most important components needed to build the ideal ventilation system for your needs.

Fresh air is your friend! Each growing room (indoor) must have a well-designed ventilation system. In order for your garden to be successful and for the harvest to be of high quality, you must also consider cleaning, bringing fresh air into the room and ventilation.

Here are the most important components needed to build the ideal ventilation system for your needs.

The reducer is a metal component that is used to connect elements with different hole diameters.

These plastic ducting wall flanges allow the quick and easy installation of ducting to a ventilation outlet or inlet in a wall, because of pre-drilled holes for screw fitting.

For installation, simply fit the corresponding size flange securely to the wall and attach the ducting with a clamp or clip. Sealant and screws are best for ensuring a secure fitting.

Fresh air is your friend! Each growing room (indoor) must have a well-designed ventilation system. In order for your garden to be successful and for the harvest to be of high quality, you must also consider cleaning, bringing fresh air into the room and ventilation. Here are the most important components needed to build the ideal ventilation system for your needs.

Y connectors are components for a branch of a ventilation system. Thanks to them you can adapt the separated elements to the room in which growing your plants.

Fresh air is your friend! Each growing room (indoor) must have a well-designed ventilation system. In order for your garden to be successful and for the harvest to be of high quality, you must also consider cleaning, bringing fresh air into the room and ventilation. Here are the most important components needed to build the ideal ventilation system for your needs.

CO2 Boost with ingredients that are 100% all-natural and harmless

- Compact, small and lightweight

- No dangerous open flames!

- No CO2 emitters or generators to mess with

Fresh air is your friend! Each growing room (indoor) must have a well-designed ventilation system. In order for your garden to be successful and for the harvest to be of high quality, you must also consider cleaning, bringing fresh air into the room and ventilation.

Here are the most important components needed to build the ideal ventilation system for your needs.

The reducer is a metal component that is used to connect elements with different hole diameters.

These plastic ducting wall flanges allow the quick and easy installation of ducting to a ventilation outlet or inlet in a wall, because of pre-drilled holes for screw fitting.

For installation, simply fit the corresponding size flange securely to the wall and attach the ducting with a clamp or clip. Sealant and screws are best for ensuring a secure fitting.

Fresh air is your friend! Each growing room (indoor) must have a well-designed ventilation system. In order for your garden to be successful and for the harvest to be of high quality, you must also consider cleaning, bringing fresh air into the room and ventilation. Here are the most important components needed to build the ideal ventilation system for your needs.

Y connectors are components for a branch of a ventilation system. Thanks to them you can adapt the separated elements to the room in which growing your plants.

Fresh air is your friend! Each growing room (indoor) must have a well-designed ventilation system. In order for your garden to be successful and for the harvest to be of high quality, you must also consider cleaning, bringing fresh air into the room and ventilation. Here are the most important components needed to build the ideal ventilation system for your needs.

Fresh air is your friend! Each growing room (indoor) must have a well-designed ventilation system. In order for your garden to be successful and for the harvest to be of high quality, you must also consider cleaning, bringing fresh air into the room and ventilation.

Here are the most important components needed to build the ideal ventilation system for your needs.

The reducer is a metal component that is used to connect elements with different hole diameters.

These plastic ducting wall flanges allow the quick and easy installation of ducting to a ventilation outlet or inlet in a wall, because of pre-drilled holes for screw fitting.

For installation, simply fit the corresponding size flange securely to the wall and attach the ducting with a clamp or clip. Sealant and screws are best for ensuring a secure fitting.

Fresh air is your friend! Each growing room (indoor) must have a well-designed ventilation system. In order for your garden to be successful and for the harvest to be of high quality, you must also consider cleaning, bringing fresh air into the room and ventilation. Here are the most important components needed to build the ideal ventilation system for your needs.

Y connectors are components for a branch of a ventilation system. Thanks to them you can adapt the separated elements to the room in which growing your plants.

Fresh air is your friend! Each growing room (indoor) must have a well-designed ventilation system. In order for your garden to be successful and for the harvest to be of high quality, you must also consider cleaning, bringing fresh air into the room and ventilation. Here are the most important components needed to build the ideal ventilation system for your needs.

Fresh air is your friend! Each growing room (indoor) must have a well-designed ventilation system. In order for your garden to be successful and for the harvest to be of high quality, you must also consider cleaning, bringing fresh air into the room and ventilation.

Here are the most important components needed to build the ideal ventilation system for your needs.

The reducer is a metal component that is used to connect elements with different hole diameters.

These plastic ducting wall flanges allow the quick and easy installation of ducting to a ventilation outlet or inlet in a wall, because of pre-drilled holes for screw fitting.

For installation, simply fit the corresponding size flange securely to the wall and attach the ducting with a clamp or clip. Sealant and screws are best for ensuring a secure fitting.

Fresh air is your friend! Each growing room (indoor) must have a well-designed ventilation system. In order for your garden to be successful and for the harvest to be of high quality, you must also consider cleaning, bringing fresh air into the room and ventilation. Here are the most important components needed to build the ideal ventilation system for your needs.

Y connectors are components for a branch of a ventilation system. Thanks to them you can adapt the separated elements to the room in which growing your plants.

Fresh air is your friend! Each growing room (indoor) must have a well-designed ventilation system. In order for your garden to be successful and for the harvest to be of high quality, you must also consider cleaning, bringing fresh air into the room and ventilation. Here are the most important components needed to build the ideal ventilation system for your needs.

This range of filters provides the novice grower with a technologically sophisticated, easy to use filter system.

The Rhino Hobby provides flexibility and a longer shelf life due to its unique fully reversible neck and the fact that it's filled with the highest quality carbon available. Rhino Hobby is available in a wide variety of sizes, specifically designed for hobby growers. Rhino Hobby filters are filled with the same high quality Australian mined RC412 carbon as the Rhino Pro range of filters. A 30mm carbon bed is tightly packed into the airflow cylinder which makes it a highly effective at attracting and absolving the air of pollutants.

The smaller bed depth of carbon to that of the Pro filter makes it an even easier filter to handle and manage for the novice grower. As it has the most effective carbon integrated into the filter the Rhino Hobby will last significantly longer than other filters on the market aimed at the hobby grower. 

Features of Rhino Hobby Filters: 

• Fully reversible neck – prolongs lifespan 

• Australian mined RC412 carbon: the purest activated carbon on the market 

• 30mm carbon bed: Rhino quality for the hobby grower 

• 9-12 month lifespan

Fresh air is your friend! Each growing room (indoor) must have a well-designed ventilation system. In order for your garden to be successful and for the harvest to be of high quality, you must also consider cleaning, bringing fresh air into the room and ventilation.

Here are the most important components needed to build the ideal ventilation system for your needs.

The reducer is a metal component that is used to connect elements with different hole diameters.

These plastic ducting wall flanges allow the quick and easy installation of ducting to a ventilation outlet or inlet in a wall, because of pre-drilled holes for screw fitting.

For installation, simply fit the corresponding size flange securely to the wall and attach the ducting with a clamp or clip. Sealant and screws are best for ensuring a secure fitting.

Fresh air is your friend! Each growing room (indoor) must have a well-designed ventilation system. In order for your garden to be successful and for the harvest to be of high quality, you must also consider cleaning, bringing fresh air into the room and ventilation. Here are the most important components needed to build the ideal ventilation system for your needs.

Y connectors are components for a branch of a ventilation system. Thanks to them you can adapt the separated elements to the room in which growing your plants.

Fresh air is your friend! Each growing room (indoor) must have a well-designed ventilation system. In order for your garden to be successful and for the harvest to be of high quality, you must also consider cleaning, bringing fresh air into the room and ventilation. Here are the most important components needed to build the ideal ventilation system for your needs.

CO2 Boost works from a combination of all-natural compost ingredients.

The ingredients are mixed and placed in the bucket where the CO2 is then naturally created. The pump draws CO2 out of the bucket and released to your plants.

This product releases anywhere from 5000-15000 ppms if your CO2 monitor is placed DIRECTLY in front of the release valve. These levels decrease sufficiently once they are released into the ambient air. If your grow room is properly sealed, you can achieve optimum growing levels at 1200-1500ppms for sizes up to 10'x10'x10', if your growing area is larger than that we suggest multiple buckets.

CO2 Boost lasts at least 60 days if used constantly. If you coordinate our product with a timer to coincide with your lights on/lights off phase, it will last you 75-90 days. We suggest one bucket per growing cycle to be safe. The maximum shelf life of an open bucket is 90 days.

Even though it's a 100% organic product it is completely odorless. 

Each bucket comes with a small air hose that is attached to the pump. The best distribution method is to place this air hose directly over top of your plants to let the Co2 fall downwards onto the leaves and roots. This method is a nice way to dodge problems such as air leaks and ventilation. Inside your order you will find a pamphlet that includes a "set up and growing tips" section for more information.

CO2 Boost's ingredients are 100% all-natural and harmless. As a matter of fact once your bucket has expired you can open the bucket and use the remaining ingredients as high grade fertilizer!. The pump draws CO2 out of the bucket and released to your plants.