Air cooled reflectors

With this kit you can modify a Cooltube of 125mm the Reflector Adjust A Wings, since without these pieces, it is difficult to fit the tube to the Wings.

You will benefit from the advantages of taking the heat out of the cooltube, reflecting more the crop zone with the Adjust A Wings.Very easy to assemble, since the pieces only fit in one place, and if you have doubts, we can always help you.

You will get the benefits of a Cooltube, which will cool the growing room better and get lower to 3ºc of temperature. And we get the many advantages of the Adjust A Wings which will better distribute the light spectrum of your light bulbs.

With this Kit you will significantly improve your results, visible from the first crop.

The reflector is suitable for 400W & 600W lamps.

Attach a small fan and it will blow away the hot air from the lamp.The lamp's temperature will thus be reduced by 30-40%.The lamp can also be brought nearer the tops of the plants.Perfect for rooms where several lamps are connected.

E40 lamp-holder is included.

Reflector suitable for 600W lamps.

The Cool Tube is a tubular armature of glass with the function of regulating the temperature of the lamp.Warm air given of by the lamp is sucked out with the result of a lower heat in the growing are.Attach a small fan and it will blow away the hot air from the lamp.The lamp's temperature will thus be reduced by 30-40%.The lamp can also be brought nearer the tops of the plants.Perfect for rooms where several lamps are connected.

Reflector suitable for 600W-1000W lamps.

The Cool Tube is a tubular armature of glass with the function of regulating the temperature of the lamp.Warm air given of by the lamp is sucked out with the result of a lower heat in the growing are.Attach a small fan and it will blow away the hot air from the lamp.The lamp's temperature will thus be reduced by 30-40%.The lamp can also be brought nearer the tops of the plants.Perfect for rooms where several lamps are connected.

The electronic version of Master gear has a high power factor, low energy loss, open circuit and output short circuit protection. Easy installation!

Output power varies ± 3% when the input voltage varies in the range between 20% and 18%. The voltage of the lamp varies in the range of the standards ANSI. Stable output power can be increased lamp life by 30% and reducing the variation of the color temperature.

• Type lamps, sodium lamps with high pressure
• Rated power: 600W
• Length: 355 mm
• Width: 150 mm
• Height: 90 mm

The SPUDNIK is available in two models, compatible with 125mm (5”) or 150mm (6”) ducting.

Customers simply attach a Prima Klima inline ventilation fan to blow cool air over the lamp, cooling the light fixture and allowing the hot air around the lamp to be ducted out of the room before it gets a chance to create heat issues.

Choose SPUDNIK—Because Every Inch Counts!

The SPUDNIK has been the choice of the professionals for years—with a hugely efficient reflector shape complete with an incredible 97% reflective VEGA/MIRO9 insert, the SPUDNIK simply will not be outshone by any other air-cooled units.

• 97% reflection
• Miro9 inside reflector
• Stucco cap 0.8 mm shaped reflector
• Includes glass sheet - 4 mm
• Flange – 125 mm (5”) or 150 mm (6”)

The SPUDNIK is available in two models, compatible with 125mm (5”) or 150mm (6”) ducting.

Customers simply attach a Prima Klima inline ventilation fan to blow cool air over the lamp, cooling the light fixture and allowing the hot air around the lamp to be ducted out of the room before it gets a chance to create heat issues.

Choose SPUDNIK—Because Every Inch Counts!

The SPUDNIK has been the choice of the professionals for years—with a hugely efficient reflector shape complete with an incredible 97% reflective VEGA/MIRO9 insert, the SPUDNIK simply will not be outshone by any other air-cooled units.

• 97% reflection
• Miro9 inside reflector
• Stucco cap 0.8 mm shaped reflector
• Includes glass sheet - 4 mm
• Flange – 125 mm (5”) or 150 mm (6”)

Completely sealed with double casketed glass for an air-tight seal.

Swing Stop retention cable keeps glass from abruptly swinging down. 6 in integrated air-cooled fittings with bead ring. Galvanized steel housing with major brand powder-coating. Made with highly reflective textured aluminum. Includes socket and 15 ft. lamp cord.

The Superb Aerowing from Powerplant has revolutionised indoor cultivation by permitting a huch higher canopy level & far greater temperature control, than conventional reflectors.

These fantastic reflectors really are exceptional at keeping those grow-room temperatures low and as a result; ensuring your yields are high.Featuring a toughened 4mm glass plate which keeps heat away from your plants, the Aerowing expels heat through the two 6" openings at either end and can be vented by using either 6" just ducting with or without a small fan.

The Powerplant Aero wing reflector features a highly reflective interior to make the most of your lumen output, yet can grow right up to only a few inches below the reflector.

This is a highly efficient way of lighting all sized grow-rooms and several Aerowings can even be joined together, creating a highly effective lighting solution for single tents or much larger grows too. Each kit comes complete with hanging hooks, adjustable lamp-holder, 5 metres of cable with IEC connection as well as the glass panel and frame.

Dimensions: (h,w,d) 20 x 60 x 54cm

Raptor Reflector 8 inch air cooled

SIZE MATTERS! Hydrofarm's Raptor reflectors were designed with our customers' needs in mind. You wanted bigger, broader, brighter light coverage... our engineers designed it. Maximum air cooling with built-in flanges. Comes complete with cord set, hinged frame, tempered glass, and wire hangers. 

• BRIGHT – Full four-sided specular 95% reflective European hammertone interior

• BEST IN CLASS – Engineered design delivers optimum light efficiency

• STRONGER & MORE DURABLE – Multi-point reinforced pre-galvanized steel construction and corrosion-proof electro coating

• Tempered, sealed glass lens

• Fully gasketed and sealed for effective heat isolation and cooling

• Built-in aerodynamic socket, instructions, and hanging hardware

Raptor 8 inch dual reflector

Run up to two 1000 watt lamps simultaneously – and mix and match HPS and MH lamps for balanced output. Maximum air cooling with built-in 8" flanges. Comes complete with two 15' cord sets, hinged frame, tempered glass, and wire hangers.

SIZE: 13"H x 33"W x 43"L

• BRIGHT – Full four-sided highly reflective specular hammertone interior

• BIGGER & BROADER – Run up to 2,000 watts in one reflector

• MIX & MATCH SPECTRUMS – Sodium and halide, lower wattage/higher wattage

• ADJUSTABLE – Change mounting positions easily

MONSTER WARRIORS: Extra large air-cooled reflector 150mm diameter, with glass front, ventilated area.

Through an innovative front opening slide, you can just unscrew the locks to inspect the interior. Its octagonal shape improves light distribution with an increase up to 97% of reflection!

Features:

• Central fold in the shape of V.;
• Forced air cooling;
• Dimensions: 59 x 54 x 26 cm.
• 150mm ventilation;
• 5 meters of cable with molded plug;
• E40;
• External color white 100%;
• Possibility of adding a double and a flexible sleeve reflect heat (anti-detection);
• excellent design;

MONSTER WARRIORS: Extra large air-cooled reflector 200mm diameter, with glass front, ventilated area.

Through an innovative front opening slide, you can just unscrew the locks to inspect the interior. Its octagonal shape improves light distribution with an increase up to 97% of reflection!

Features:

• Central fold in the shape of V.;

• Forced air cooling;
• Dimensions: 59 x 54 x 26 cm.
• 200mm ventilation;
• 5 meters of cable with molded plug;
• E40;
• External color white 100%;
• Possibility of adding a double and a flexible sleeve reflect heat (anti-detection);
• excellent design;

The Dominator XXL grow light reflector is made with commercial growers in mind.

THE BIGGEST WINGSPAN IN THE MARKET!

Broad light spread allows close placement of plants for maximum light delivery in low-clearance locations.Equipped with safety cables for safe and easy maintenance, constructed with heavy dutypre-galvanized steel. Completely sealed gasketed glass provides tight fit. Made from premium 95% reflective European aluminium. Comes with buil-in socket, 15' pre-wired lamp cord, and hanging hooks.

- Highly reflective aluminium

- Safety cable holds glass door in place

- Completely sealed with hinged glass

- Built-in streamlined socket

- Dimensions: 10 1/5''  x   27 3/5''  x  37''

- Accepts: HPS/MH bulbs from 400W to 1000W

The Yield Master II grow light reflector is made with commercial growers in mind.

The SunGro grow light reflector is made with commercial growers in mind.

Features: