Accessories & parts
Accessories and parts for hydroponic systems
Gardena Smart flow watermeter
The innovative GARDENA Water Smart Flow Meter allows targeted irrigation that is measured and mindful
At a glance, you can see
1. the water consumption per day,
2. the water consumption per season,
3. the water consumption per watering session
4. the current flow in litre per minute.
The consumed water quantity can be read at any time on the large display and thereby controlled. With a single button for all functions, the Water Smart Flow Meter is easy to use. Until now, irrigation has been a matter of personal judgment and one's form on the day.
The Water Smart Flow Meter ensures that you have better control. From now on, you can water in a targeted, requirement-suitable and systematic way. This is good for the garden, the environment, and the wallet. The Water Smart Flow Meter is battery-operated and can be immediately connected to the tap, to a sprayer, a sprinkler or a pump.
The robust and impact-proof Water Smart Flow Meter is simply clicked onto the Threaded Tap Connector or Standard Hose Connector and immediately supplies important data through active measurement. An integrated battery-level display secures precise operation. This innovative meter raises awareness of water consumption.
INSTRUCTIONS MANUAL YOU CAN DOWNLOAD FROM HERE
4mm PVC Flexible Pipe for air circulation - 100m
4mm PVC Flexible Pipe for air circulation
4mm PVC Flexible Pipe for air circulation - 1m
4mm PVC Flexible Pipe for air circulation
8mm PVC Flexible Pipe for air circulation - 80m
8mm PVC Flexible Pipe for air circulation
8mm PVC Flexible Pipe for air circulation - 1m
8mm PVC Flexible Pipe for air circulation
Autopot reservoir adapter connection
This quick adapter between the tank and the filter is very easy to use, you just need to connect it to the provided taps.
It has a filter that prevents impurities from entering the water along the pipeline, so it takes longer for the sludge to collect and clog.
Drip irrigation hole puncher Ф3mm
Hole Punch is used with drip irrigation to create quarter inch holes for quarter inch barbed fittings and drippers.
Its designed to fit comfortably in your hand and has a tip that cuts a quarter inch hole in both half and three quarter inch solid poly tubing.
Using it is easy!To use, simply locate the area on the drip tubing where you what to add a fitting or drip emitter. Grab the tubing between your thumb and forefinger, squeezing slightly. Next, place the tip against the tubing and firmly press down, twisting back and forth. As you pierce the tubing, you may hear a popping sound.
Emitters and fittings are then inserted into the hole. They will snap into place as you insert them.
Hole punches come in various models to suit your specific needs & budget.
AGRAS self compensating dripper 2L/H
Self-Compensating and self-cleaning dripper with No-Drain system.
Placed directly onto ΡΕ pipe 12 – 32 mm or at the end of pipe 6mm. The outlet of the dripper can be connected with micro-tube dripper hose 3,2mm or distribution manifold. Dripper operates when pressure is > 0,5 bar and seals when pressure is < 0,3 bar.
5mm Arrow Dripper Bent
There is a limit of water flow and maximum capacity of 1 liter per hour.
It is suitable for a drip irrigation system of soil.
3/4mm Adjustable Dripper on Stake (360 Degrees)
3/4mm Adjustable Dripper on Stake (360 Degrees)
5mm Arrow Dripper Bent
There is a limit of water flow and maximum capacity of 2 liters per hour.
It is suitable for a drip irrigation system of soil.
